EN 62827-1-2016 en Wireless Power Transfer - Management - Part 1 Common Components.pdf

《EN 62827-1-2016 en Wireless Power Transfer - Management - Part 1 Common Components.pdf》由会员分享，可在线阅读，更多相关《EN 62827-1-2016 en Wireless Power Transfer - Management - Part 1 Common Components.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、Wireless Power Transfer ManagementPart 1: Common ComponentsBS EN 62827-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62827-1:2016. It isidentical to IEC 62827-1:2016. The UK participation i

2、n its preparation was entrusted to TechnicalCommittee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Us

3、ers are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 87350 8ICS 29.240.99; 35.240.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the a

4、uthority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62827-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62827-1 November 2016 ICS 29.240.99; 35.240.99 English Version Wireless Po

5、wer Transfer - Management - Part 1: Common Components (IEC 62827-1:2016) Transfert de puissance sans fil - Gestion - Partie 1: Composants communs (IEC 62827-1:2016) Drahtlose Energiebertragung - Management - Teil 1: Gemeinsame Komponenten (IEC 62827-1:2016) This European Standard was approved by CEN

6、ELEC on 2016-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa

7、rds may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language

8、 and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

9、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normali

10、sation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62827-1:2016 E BS EN 62827-1:2016EN 62827

11、-1:2016 2 European foreword The text of document 100/2451/CDV, future edition 1 of IEC 62827-1, prepared by Technical Area 15 “Wireless power transfer” of IEC/TC 100 “Audio, video and multimedia systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62827

12、-1:2016. The following dates are fixed: latest date by which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2017-05-18 latest date by which the nationalstandards conflicting with thedocument have to be withdrawn(dow) 2019-11-

13、18 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62827-1:2016 was appr

14、oved by CENELEC as a European Standard without any modification. BS EN 62827-1:2016 2 IEC 62827-1:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Terms, definitions and abbreviations 6 2.1 Terms and definitions 6 2.2 Abbreviations 7 3 Overview . 7 4 Reference models 8 4.1 General .

15、8 4.2 WPT of one source to one device (1:1) 8 4.3 WPT of one source to many devices (1:N) . 9 4.4 A WPT of many sources to many devices (M:N) . 10 4.5 WPMS with WPMS-Rs . 10 5 Components in WPMS-S and WPMS-D 12 6 Functionalities . 13 Figure 1 Concept of a wireless power management system . 8 Figure

16、2 Structure of 1:1 wireless power transfer network . 9 Figure 3 Structure of a 1:N wireless power transfer network 9 Figure 4 Structure of a M:N wireless power transfer network . 10 Figure 5 WPMS-R as power receiver 11 Figure 6 WPMS-R as power transmitter 12 Figure 7 Components of WPMS-S and WPMS-D

17、in WPMS 12 BS EN 62827-1:2016IEC 62827-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ WIRELESS POWER TRANSFER MANAGEMENT Part 1: Common components FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national el

18、ectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Speci

19、fications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internat

20、ional, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal

21、 decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for

22、international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)

23、In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall

24、be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certific

25、ation bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury

26、, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cit

27、ed in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifyi

28、ng any or all such patent rights. International Standard IEC 62827-1 has been prepared by technical area 15: Wireless power transfer, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on the following documents: CDV Report on voting

29、 100/2451/CDV 100/2538/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 62827-1:2016 4 IEC 62827-1:2016 IEC 2016 A list of

30、 all parts in the IEC 62827 series, published under the general title Wireless power transfer Management, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore

31、.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be usef

32、ul for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62827-1:2016IEC 62827-1:2016 IEC 2016 5 INTRODUCTION The IEC 62827 (Wireless power transfer Management) series provides the management protocol for a wireless power transfer sys

33、tem in which power sources can deliver power to receivers at a distance. IEC 62827 consists of the following parts: Part 1: Common components Part 2: Multiple devices control management Part 3: Multiple sources control managementPart 1 of IEC 62827 defines the definition and functionality for a wire

34、less power transfer system. Part 2 of IEC 62827 specifies the management protocol of wireless power transfer for multiple devices. Part 3 of IEC 62827 specifies the management protocol of wireless power transfer for multiple sources. BS EN 62827-1:2016 6 IEC 62827-1:2016 IEC 2016 WIRELESS POWER TRAN

35、SFER MANAGEMENT Part 1: Common components 1 Scope This part of IEC 62827 specifies common components of management for multiple sources and devices in a wireless power transfer system, and justifies various functions for wireless power transfer. This part of IEC 62827 defines the reference models fo

36、r possible configurations of a wireless power transfer system. The models are specified in additional parts in more detail. NOTE This standard is applied to a wireless power transfer system for audio, video and multimedia equipment. 2 Terms, definitions and abbreviations 2.1 Terms and definitions Fo

37、r the purposes of this document, the following terms and definitions apply. 2.1.1 wireless power receiver device which receives electric power wirelessly Note 1 to entry: There are two types of wireless power receivers. One is a wireless power receiver with battery. The other is a wireless power rec

38、eiver without battery, such as speakers and displays. 2.1.2 wireless power source transmitter which delivers electric power to power receiver wirelessly 2.1.3 wireless power transfer transfer of electric power without the physical contact of electrodes 2.1.4 wireless data communication zone area tha

39、t includes wireless power sources or wireless power receivers, and enables data communication without physical contact Note 1 to entry: A wireless data communication zone includes a wireless power transfer zone. Note 2 to entry: A wireless data communication zone can be a union of multiple wireless

40、data communication zones managed by multiple wireless power sources. 2.1.5 wireless power transfer zone area that includes wireless power sources or wireless power receivers, and enables power transfer without physical contact Note 1 to entry: A wireless power transfer zone can be a union of multipl

41、e wireless power transfer zones managed by multiple wireless power sources. BS EN 62827-1:2016IEC 62827-1:2016 IEC 2016 7 2.1.6 wireless power management system management system that is capable of transferring wireless power from either one or multiple power sources to either one or multiple power

42、devices with wireless communication Note 1 to entry: In case that areas or regions, where both data and power can be transferred, are emphasized, the term “wireless power transfer network” may be used. 2.1.7 wireless power management system wireless power source which can transfer power to a number

43、of WPMS devices (WPMS-Ds) or relay transmitters (WPMS-Rs) 2.1.8 wireless power management system wireless power receiver which can receive power from the WPMS sources (WPMS-Ss) or relay transmitters (WPMS-Rs) 2.1.9 wireless power management system wireless power relay transmitter which can transfer

44、electric power from one or multiple source(s) to one or multiple device(s) Note 1 to entry: To relay electric power wirelessly, it performs a source (WPMS-S) and a device (WPMS-D) at a time. 2.2 Abbreviations WPT Wireless Power Transfer WDCZ Wireless Data Communication Zone WPTZ Wireless Power Trans

45、fer Zone WPTN Wireless Power Transfer Network WPMS Wireless Power Management System WPMS-S Wireless Power Management System Source WPMS-R Wireless Power Management System Repeater WPMS-D Wireless Power Management System Device 3 Overview WPMS is the management system of WPT for multiple WPMS-Ss and

46、WPMS-Ds. Conventional charging via a cable is inconvenient to users. WPT is a technology that eliminates a conventional charging method via a wired cable. It utilizes the characteristics of electromagnetic coupling to deliver power at a distance. WPMS aims to provide consumers of various mobile devi

47、ces an option to be able to fully utilize WPT that delivers power wirelessly. To break away from conventional 1:1 wireless charging (1:1 WPT), WPMS will be managing power transfer for multiple WPMS-Ss and WPMS-Ds (M:N WPT) simultaneously. BS EN 62827-1:2016 8 IEC 62827-1:2016 IEC 2016 Figure 1 Conce

48、pt of a wireless power management system In Figure 1, there are three sources which have repeaters or several devices such as a TV, a remote control, a tablet PC, a smartphone, a notebook computer and wireless speakers in their own WPTZ. The WPMS technology can be applied to the various fields, incl

49、uding the following. Mobile terminals: Charging services can be provided to mobile terminals any time andanywhere. Home appliances: The use of WPMS technology can offer the benefits of minimal wiringand choice of furniture arrangements, while eliminating the disorder and inconvenience ofconventional cable charging.4 Reference models 4.1 General This clause describes the reference models offering possible configurations of WPMS-S(s), WPMS-R(s) and WPMS-D(s). 4.2 WPT