EN 61754-22-2005 en Fibre optic connector interfaces Part 22 Type F-SMA connector family《光纤连接器接口 第22部分 F-SMA型连接器系列 替代 EN 18-610 1994》.pdf

《EN 61754-22-2005 en Fibre optic connector interfaces Part 22 Type F-SMA connector family《光纤连接器接口 第22部分 F-SMA型连接器系列 替代 EN 18-610 1994》.pdf》由会员分享，可在线阅读，更多相关《EN 61754-22-2005 en Fibre optic connector interfaces Part 22 Type F-SMA connector family《光纤连接器接口 第22部分 F-SMA型连接器系列 替代 EN 18-610 1994》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 61754-22:2005Fibre optic connector interfaces Part 22: Type F-SMA connector familyThe European Standard EN 61754-22:2005 has the status of a British StandardICS 33.180.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g4

2、0g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61754-22:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 23 December 2005 BSI 23 December 2005ISBN 0 580 47060 1National forewordThis Britis

3、h Standard is the official English language version of EN 61754-22:2005. It is identical with IEC 61754-22:2005. It supersedes BS EN 186100:1995 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic

4、 interconnecting devices and passive components, which has the responsibility to:A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this docum

5、ent may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. U

6、sers are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for chang

7、e, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover.The BSI copyright notice displayed in this document

8、 indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 61754-22 NORME EUROPENNE EUROPISCHE NORM September 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisch

9、es Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61754-22:2005 E ICS 33.180.20 Supersedes EN 186100:1994English version Fibre o

10、ptic connector interfaces Part 22: Type F-SMA connector family (IEC 61754-22:2005) Interfaces de connecteurs pour fibres optiques Partie 22: Famille de connecteurs de type F-SMA (CEI 61754-22:2005) Steckgesichter von LWL-SteckverbindernTeil 22: Steckverbinderfamilie der Bauart F-SMA (IEC 61754-22:20

11、05) This European Standard was approved by CENELEC on 2005-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi

12、cal references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

13、CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, I

14、reland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 86B/2130/FDIS, future edition 1 of IEC 61754-22, prepared by SC 86B, Fibre optic interconnecting devices and pa

15、ssive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-22 on 2005-08-01. This European Standard supersedes EN 186100:1994. The following dates were fixed: latest date by which the EN has to be implemented at national level

16、 by publication of an identical national standard or by endorsement (dop) 2006-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-08-01 _ Endorsement notice The text of the International Standard IEC 61754-22:2005 was approved by CENELEC as a Eu

17、ropean Standard without any modification. _ EN 61754-22:2005 2 3 EN 61754-22:2005 CONTENTS 1 Scope 4 2 Description.4 3 Interfaces.4 Figure 1 Plug F-SMA I and FSMA II connector interface.5 Figure 2 Adaptor connector interface8 Figure 3 Receptacle connector interface.10 Table 1 Dimensions of the plug

18、F-SMA I connector interface.6 Table 2 Dimensions the plug F-SMA II connector interface7 Table 3 Dimensions of the adaptor connector interface .9 Table 4 Dimensions of the receptacle connector interface.11 Table 5 Grade table.11 EN 61754-22:2005 4 FIBRE OPTIC CONNECTOR INTERFACES Part 22: Type F-SMA

19、Connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for the type F-SMA family of connectors. 2 Description Type F-SMA defines a single way connector, characterized by a -36 UNS thread coupling mechanism and a cylindrical ferrule of 3,175 mm nominal diameter. The

20、 optical alignment of the connector is achieved by a rigid bore sleeve. It is a non-contacting connector. The applied configuration is: plug/adaptor/plug, or plug/socket. The F-SMA connector is suited for applications in combination with multimode fibres. It includes two types of plugs: one (F-SMA I

21、) is a precision type for use with silica fibres from categories A1 / A2 / A3 / A4 (according to IEC 60793-21); the other (F-SMA II) is a modified type for use with large core plastic optical fibres (POF) of type A4 a / A4 d. The two plugs have mechanical compatibility with the adaptor and the recep

22、tacle. 3 Interfaces The subsequent pages define the standard interfaces for the type F-SMA connector family. This standard contains the following standard interfaces: Interface 22-1: Plug F-SMA I and F-SMA II connector interface (see Figure 1) Interface 22-3: Adaptor connector interface (see Figure

23、2) Interface 22-4: Receptacle connector interface (see Figure 3) 1)IEC 60793-2, Optical fibres Part 2: Product specifications General 5 EN 61754-22:2005 Mechanical reference plane Optical reference plane MXC A G K J F ZBBP H 0,03 M BDIEC 977/05 Figure 1 Plug F-SMA I and FSMA II connector interface E

24、N 61754-22:2005 6 Table 1 Dimensions of the plug F-SMA I connector interface Dimensions amm Reference Min. Max. Remarks A b9,780 9,812 B c, f3,166 3,172 Diameter C 2,00 2,55 D 4,52 4,62 Diameter F 35 48 Degree G 1,50 3,75 H 2,30 3,75 J 0,1 0,80 Chamfer K 3,0 Md9,3 Outer diameter Pe2,00 - X - 36-UNS-

25、2B Z 6,95 - Diameter aDimensions for mechanical intermateability are shown. bDimension is for terminated finished ferrules. cDiameter B is only mandatory over length K. dSleeve-nut shape: hexagonal, 8 mm A/F; optional circular, knurled. eFully formed thread to this depth. fFor ferrules, the plug mus

26、t fully enter a cylindrical gauge with a 3,174 mm diameter hole of a length 9,812 mm. 7 EN 61754-22:2005 Table 2 Dimensions the plug F-SMA II connector interface Dimensions amm Reference Min. Max. Remarks Ab9,78 9,80 Bc,f3,15 3,17 Diameter C 2,00 2,55 D 4,52 4,62 Diameter F 35 48 Degree G 1,50 3,75

27、H 2,30 3,75 J 0,25 0,80 Chamfer K 3,00 Md9,30 Outer DiameterPe2,00 - X - 36-UNS-2B Z 6,95 - Diameter aDimensions for mechanical intermateability are shown. bDimension is for terminated finished ferrules. cDiameter B is only mandatory over length K. dSleeve-nut shape: hexagonal, 8 mm A/F; optional ci

28、rcular, knurled. eFully formed thread to this depth. fFor ferrules, the plug must fully enter a cylindrical gauge with a 3,174 mm diameter hole of a length 9,80 mm. EN 61754-22:2005 8 Mechanical reference plane XOptical datum target Unobstructed clearance for nut DEFBBK A J G H C 0,03 M B IEC 978/05

29、 Figure 2 Adaptor connector interface 9 EN 61754-22:2005 Table 3 Dimensions of the adaptor connector interface Dimensions amm Reference Min. Max. Remarks A 9,812 - Bb3,175 3,190 Diameter Cd1,85 1,98 Dd4,68 4,75 Diameter E 3,175 3,185 Diameter F 50 65 Degree G 1,50 - H 4,25 Jc0,10 0,50 Chamfer K 3,00

30、 - X - 36-UNS-2A aDimensions for mechanical intermateability are shown. bMaximum diameter B is only mandatory over length K. cNo sharp edges are allowed. dCounterbore feature optional. EN 61754-22:2005 10 Mechanical reference plane XOptical reference plane DEBF C G H Unobstructed clearance for nut B

31、J A K 0,03 MBIEC 979/05 Figure 3 Receptacle connector interface 11 EN 61754-22:2005 Table 4 Dimensions of the receptacle connector interface Dimensions amm Reference Min. Max. Remarks Ad9,820 Bb,eSee Table 5 Cf1,85 1,96 Df4,68 4,75 Diameter E 3,175 3,200 Diameter F 35 45 Degree G 1,50 - H 3,73 Jc0,2

32、5 0,50 Chamfer K 3,00 - X - 36-UNS-2A aDimensions for mechanical intermateability are shown. bDiameter B is only mandatory over length K. cNo sharp edges are allowed. dThe optical front face of the E/O-converter installed is recessed to prevent mechanical damage. eThe receptacle accepts a plug gauge

33、 of 3,1748 mm diameter over a length of 9,813 mm. fCounter bore feature optional. Table 5 Grade tableB mm Grade Minimum Maximum Remarks 1 3,175 3,179 Rigid sleeve 2 3,175 3,190 Rigi sleeve 3 3,175 3,200 Rigid sleeve admissible for F-SMA II only BS EN 61754-22:2005BSI389 Chiswick High RoadLondonW4 4A

34、LBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. User

35、s of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretar

36、y of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standar

37、ds.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for inter

38、national standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Tech

39、nical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with

40、 standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards

41、via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as

42、 permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the co

43、urse of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.