EN 60034-5-2001 en Rotating Electrical Machines Part 5 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (Incorporate.pdf

《EN 60034-5-2001 en Rotating Electrical Machines Part 5 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (Incorporate.pdf》由会员分享，可在线阅读，更多相关《EN 60034-5-2001 en Rotating Electrical Machines Part 5 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (Incorporate.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60034-5:2001 IEC 60034-5:2000 Incorporating amendment no. 1 Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) Classification The European Standard EN 60034-5:2001, incorporating amendment A1:200

2、7, has the status of a British Standard ICS 29.160.01 BS EN 60034-5:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 2001 BSI 2007 ISBN 0 580 37

3、513 7 National foreword This British Standard was published by BSI. It is the UK implementation of EN 60034-5:2001, incorporating amendment A1:2007. It is identical with IEC 60034-5:2000, incorporating amendment 1:2006. It supersedes BS 4999-105:1988 which is withdrawn. The start and finish of text

4、introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee PEL/2, Rota

5、ting electrical machinery. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard

6、 cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Date Comments 16941 28 February 2007 See national forewordEUROPEAN STANDARD EN 60034-5 NORME EUROPENNE EUROPISCHE NORM February 2001 CENELEC European Committee for Electrotechnical Standardization Comit Euro

7、pen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60034-5:2001 E ICS 29.160 Super

8、sedes EN 60034-5:1986 English version Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2000) Machines lectriques tournantes Partie 5: Degrs de protection procurs par la conception intgra

9、le des machines lectriques tournantes (code IP) - Classification (CEI 60034-5:2000) Drehende elektrische Maschinen Teil 5: Schutzarten aufgrund der Gesamtkonstruktion von drehenden elektrischen Maschinen (IP-Code) - Einteilung (IEC 60034-5:2000) This European Standard was approved by CENELEC on 2000

10、-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o

11、btained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the C

12、entral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland

13、 and United Kingdom. January2007 +A1Foreword The text of document 2/1098/FDIS, future edition 4 of IEC 60034-5, prepared by IEC TC 2, Rotating machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60034-5 on 2000-12-01. This European Standard supersedes EN 60034

14、-5:1986. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2001-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2003-12-01 A

15、nnexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60034-5:2000 was approved by CENELEC as a European Standard without any modification. _ Pag

16、e2 EN600345:2001 The text of document 2/1378/CDV, future amendment 1 to IEC 60034-5:2000, prepared by IEC TC 2, Rotating machinery, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as amendment A1 to EN 60034-5:2001 on 2006-12-01. The following dates

17、were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-09-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2009-12-01 _ Endorsement no

18、tice The text of amendment 1:2006 to the International Standard IEC 60034-5:2000 was approved by CENELEC as an amendment to the European Standard without any modification. _ Foreword to amendment A1 CONTENTS Page Clause 1 Scope and object . 4 2 Normative references. 4 3 Designation 5 3.1 Single char

19、acteristic numeral 5 3.2 Supplementary letters . 5 3.3 Example of designation. 5 4 Degrees of protection First characteristic numeral . 6 4.1 Indication of degree of protection 6 4.2 Compliance to indicated degree of protection 6 4.3 External fans 6 4.4 Drain holes . 6 5 Degrees of protection Second

20、 characteristic numeral. 8 6 Marking 9 7 General requirements for tests . 9 7.1 Adequate clearance 9 8 Tests for first characteristic numeral10 9 Tests for second characteristic numeral 12 9.1 Test conditions 12 9.2 Acceptance conditions .14 10 Requirements and tests for open weather-protected machi

21、nes 15 Annex ZA (normative) Normative references to international publications with their corresponding European publications 21 Figure 1 Standard test finger 16 Figure 2 Equipment to prove protection against dust .17 Figure 3 Equipment to prove protection against dripping water 18 Figure 4 Equipmen

22、t to prove protection against spraying and splashing water 19 Figure 5 Hand-held equipment to prove protection against spraying and splashing water.20 Figure 6 Standard nozzle for hose test20 Table 1 Test requirements for guards 6 Table 2 Degrees of protection indicated by the first characteristic n

23、umeral . 7 Table 3 Degrees of protection indicated by the second characteristic numeral 8 Table 4 Test and acceptance conditions for first characteristic numeral10-11 Table 5 Test conditions for second characteristic numeral12-14 Page3 EN600345:2001ROTATING ELECTRICAL MACHINES Part 5: Degrees of pro

24、tection provided by the integral design of rotating electrical machines (IP code) Classification 1 Scope and object This International Standard applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective e

25、nclosures that are in all other respects suitable for their intended use and which, from the point of view of materials and workmanship, ensure that the properties dealt with in this standard are maintained under normal conditions of use. In certain applications (such as agricultural or domestic app

26、liances), more extensive precautions against accidental or deliberate contact may be specified. This standard gives definitions for standard degrees of protection provided by enclosures applicable to rotating electrical machines as regards the: a) protection of persons against contacts with or appro

27、ach to live parts and against contact with moving parts (other than smooth rotating shafts and the like) inside the enclosure and protection of the machine against ingress of solid foreign objects; b) protection of machines against the harmful effects due to ingress of water. It gives designations f

28、or these protective degrees and tests to be performed to check that the machines meet the requirements of this standard. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60034. For dated refer

29、ences, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC 60034 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated referenc

30、es, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. Page4 EN600345:2001 !This standard does not specify: degrees of protection against mechanical damage of the machine, or conditions such as moist

31、ure (produced for example by condensation), corrosive dust and vapour, fungus or vermin; types of protection of machines for use in a potentially explosive (dust, vapour) environment. “ IEC 60034-1, Rotating electrical machines Part 1: Rating and performance * IEC 60034-6, Rotating electrical machin

32、es Part 6: Methods of cooling (IC code) 3 Designation The designation used for the degree of protection consists of the letters IP followed by two characteristic numerals signifying conformity with the conditions indicated in the tables of clauses 4 and 5 respectively. 3.1 Single characteristic nume

33、ral When it is required to indicate a degree of protection by only one characteristic numeral, the omitted numeral shall be replaced by the letter X, for example IPX5 or IP2X. 3.2 Supplementary letters Additional information may be indicated by a supplementary letter following the second characteris

34、tic numeral. If more than one letter is used, the alphabetic sequence shall apply. 3.2.1 In special applications (such as machines with open circuit cooling for ship deck installation with air inlet and outlet openings closed during standstill), numerals may be followed by a letter indicating whethe

35、r the protection against harmful effects due to ingress of water was verified or tested for the machine not running (letter S) or the machine running (letter M). In this case, the degree of protection in either state of the machine shall be indicated, for example IP55S/IP20M. The absence of the lett

36、ers S and M shall imply that the intended degree of protection will be provided under all normal conditions of use. 3.2.2 For air-cooled open machines suitable for specific weather conditions and provided with additional protective features or processes (as specified in clause 10), the letter W may

37、be used. 3.3 Example of designation IP 4 4 Characteristic letters First characteristic numeral (see table 2) Second characteristic numeral (see table 3) _ * A consolidated edition 10.2 (1999) was issued comprising IEC 60034-1 (1996) and its amendments 1 (1997) and 2 (1999). Page5 EN600345:20014 Degr

38、ees of protection First characteristic numeral 4.1 Indication of degree of protection The first characteristic numeral indicates the degree of protection provided by the enclosure to persons and to the parts of the machine inside the enclosure. Table 2 gives, in the third column, brief details of ob

39、jects which will be excluded from the enclosure for each of the degrees of protection represented by the first characteristic numeral. The term excluded implies that a part of the body, a tool or a wire held by a person, either will not enter the machine or, if it enters, that adequate clearance wil

40、l be maintained between it and the live parts or dangerous moving parts (smooth rotating shafts and the like are not considered dangerous). The third column of table 2 also indicates the minimum size of solid foreign objects which will be excluded. 4.2 Compliance to indicated degree of protection Co

41、mpliance of an enclosure with an indicated degree of protection implies that the enclosure will also comply with all lower degrees of protection in table 2. In consequence, the tests establishing these lower degrees of protection are not required, except in case of doubt. 4.3 External fans The blade

42、s and spokes of fans external to the enclosure shall be protected against contact by means of guards complying with table 1. Table 1 Test requirements for guards Protection of machine Test IP1X 50 mm sphere test IP2X to IP6X Finger test For the test, the rotor shall be slowly rotated, for example by

43、 hand when possible. Smooth rotating shafts and similar parts are not considered dangerous. 4.4 Drain holes If the machine is provided with drain holes, the following shall apply: drain holes intended normally to be open on site shall be kept open during testing; drain holes intended normally to be

44、closed on site shall be kept closed during testing; if machines with protection IP3X or IP4X are intended to be run with open drain holes, the drain holes may comply with protection IP2X; if machines with protection IP5X are intended to be run with open drain holes, the drain holes shall comply with

45、 protection IP4X. Page6 EN600345:2001Table 2 Degrees of protection indicated by the first characteristic numeral Degree of protection First characteristic numeral Brief description (NOTE 1) Definition Test conditions 0 Non-protected machine No special protection No test 1 (NOTE 2) Machine protected

46、against solid objects greater than 50 mm Accidental or inadvertent contact with or approach to live and moving parts inside the enclosure by a large surface of the human body, such as a hand (but no protection against deliberate access) Ingress of solid objects exceeding 50 mm in diameter Table 4 2

47、(NOTE 2) Machine protected against solid objects greater than 12 mm Contact with or approach to live or moving parts inside the enclosure by fingers or similar objects not exceeding 80 mm in length Ingress of solid objects exceeding 12 mm in diameter 3 (NOTE 2) Machine protected against solid object

48、s greater than 2,5 mm Contact with or approach to live or moving parts inside the enclosure by tools or wires exceeding 2,5 mm in diameter Ingress of solid objects exceeding 2,5 mm in diameter 4 (NOTE 2) Machine protected against solid objects greater than 1 mm Contact with or approach to live or mo

49、ving parts inside the enclosure by wires or strips of thickness greater than 1 mm Ingress of solid objects exceeding 1 mm in diameter 5 (NOTE 3) Dust-protected machine Contact with or approach to live or moving parts inside the enclosure Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operatio