EN 50516-3-1-2014 en Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1 Type OD.pdf

《EN 50516-3-1-2014 en Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1 Type OD.pdf》由会员分享，可在线阅读，更多相关《EN 50516-3-1-2014 en Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1 Type OD.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationIndustrial connector sets and interconnect components to be used in optical fibre controland communication systems Product specificationsPart 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (indust

2、rial environments) as specified in EN 50173-1 and IEC 61753-1-3BS EN 50516-3-1:2014National forewordThis British Standard is the UK implementation of EN 50516-3-1:2014.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre op

3、ticinterconnecting devices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British St

4、andards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 78811 6ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2014.Ame

5、ndments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50516-3-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50516-3-1 June 2014 ICS 33.180.20 English Version Industrial connector sets and interconnect components to be used in optical fibre control and commun

6、ication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 Industrie-Steckverbinderstze und Verbindungsbauelemente

7、 fr Lichtwellenleiter-Steuerungs- und Datenbertragungssysteme - Produktnormen - Teil 3-1: Industriesteckverbinder der Bauart ODVA-APC zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach EN 60793-2-50 fr die Kategorie I (Industrieumgebung) nach den Festlegungen in EN 50173-1 und IEC 61753-1-

8、3 This European Standard was approved by CENELEC on 2013-12-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica

9、l references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

10、ty of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, For

11、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechni

12、cal Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No.

13、EN 50516-3-1:2014 E BS EN 50516-3-1:2014EN 50516-3-1:2014 - 2 - Contents Foreword . 4 1 Scope 7 1.1 Product definition 7 1.2 Intermateability 7 1.3 Operating environment . 7 1.4 Reliability . 7 1.5 Quality assurance . 7 2 Normative references 8 3 Description . 10 3.1 General . 10 3.2 Plug . 10 3.3 A

14、daptor . 10 3.4 Materials . 10 3.5 Dimensions 10 3.6 Colour and marking 11 4 Variants . 11 4.1 Terminated plug 11 4.2 Adaptor . 12 4.3 Identification of variants . 12 5 Dimensional requirements . 13 5.1 Outline dimensions . 13 5.2 Mating face and other limit dimensions 17 6 Tests . 26 6.1 Sample siz

15、e 26 6.2 Test and measurement methods . 27 6.3 Test sequence . 27 6.4 Pass/fail criteria . 27 7 Test report 27 8 Product qualification requirements . 27 8.1 Dimensional and marking requirements . 27 8.2 Optical performance requirements . 28 8.3 Mechanical performance requirements 29 8.4 Environmenta

16、l performance requirements . 33 Annex A (informative) Attenuation against reference 36 A.1 Test details . 36 A.2 Reference LF3 connector details . 36 Annex B (normative) Sample size and product sourcing requirements . 37 Annex C (informative) Details of environmental classification out of EN 50173-1

17、 (MICE) . 38 Annex D (informative) Details of sample construction 39 Annex E (informative) Patent statement concerning ODVA industrial connectors 40 Bibliography 42 BS EN 50516-3-1:2014- 3 - EN 50516-3-1:2014 Figures Figure 1a Outline dimensions Plug 13 Figure 1b Outline dimensions Plug 14 Figure 2

18、Outline dimensions Fixed adaptor . 15 Figure 3 Cut out for fixed adaptor mounting Variant 01 . 16 Figure 4 Cut out for fixed adaptor mounting Variant 02 . 16 Figure 5 Plug mating face and other limit dimensions . 17 Figure 5 Plug mating face and other limit dimensions . 18 Figure 6 Variant B1 / C1 /

19、 C1-FSOC LF3 connector interface . 19 Figure 6 Variant B1 / C1 / C1-FSOC LF3 connector interface . 20 Figure 7 Ferrule endface geometry After termination 20 Figure 8 Positioning of fibre core . 21 Figure 9 Ferrule endface geometry Allowable undercut 22 Figure 10 Variant 01, fixed adaptor 23 Figure 1

20、1 LF3 adaptor interface . 24 Figure 11 LF3 adaptor interface . 25 Figure 12 Pin gauge for adaptor 26 Figure D.1 Example of test specimen for Tests 1 13 39 Figure D.2 Example of test specimen for Tests 14 19 39 Tables Table 1 Ensured level of random attenuation 7 Table 2 Preferred colour scheme . 11

21、Table 3 Terminated plug Plug variants 11 Table 4 Terminated plug Adaptor variants 12 Table 5 Identification of plug variants . 12 Table 6 Identification of adaptor variants . 12 Table 7 Geometrical parameters . 21 Table 8 Optical performance requirements 28 Table 9 Mechanical performance requirement

22、s . 29 Table 10 Environmental performance requirements 33 Table A.1 Attenuation measurement: Test details . 36 Table B.1 Sample size and product sourcing requirements 37 Table C.1 Details of environmental classification out of EN 50173-1 (MICE) 38 BS EN 50516-3-1:2014EN 50516-3-1:2014 - 4 - Foreword

23、 This document (EN 50516-3-1:2014) has been prepared by CLC/TC 86BXA, “Fibre optic interconnect, passive and connectorised components“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by end

24、orsement (dop) 2014-12-23 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-12-23 EN 50516, Industrial connector sets and interconnect components to be used in optical fibre control and communication systems Product specifications, is currentl

25、y divided in the following parts: Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3; Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10 cate

26、gory A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3; Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments)

27、 as specified in EN 50173-1 and IEC 61753-1-3 the present document. CENELEC draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning ODVA industrial connectors (see declaration in Annex E). Attention is drawn to the possibility that

28、 some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. _ BS EN 50516-3-1:2014- 5 - EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre

29、control and communication systems Product specifications Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 Description Performance Coupling mechanis

30、m: Twist and lock with sealing Application: For the use in category I (industrial environment) Configuration: Plug / adaptor / with one side of the configuration having a seal and a protective shell Attenuation (random mate) factory terminated: Attenuation (random mate) FSOC: B: 0,12 dB mean 0,25 dB

31、 for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements Fibre category: EN 60793-2-50 Type B1.1 and B1.3 Cable type: See Table 3 Return loss: 1: 60 dB (mated) 55 dB (unmated) Related documents: EN 50173-1 Information technology Gene

32、ric cabling systems Part 1: General requirements EN 50173-3 Information technology Generic cabling systems Part 3: Industrial premises EN 60529 Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60794-3 Optical fibre cables Part 3: Sectional specification Outdoor cables (IEC 60794

33、-3) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) FprE

34、N 61753-1-3 1)Fibre optic interconnecting devices and passive components Performance standard Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for harsh industrial environment, Category I (IEC 61753-1-3:201X (86B/3496/CDV) EN 61754-28 Fibre optic interconnectin

35、g devices and passive components Fibre optic connector interfaces Part 28: Type LF3 connector family (IEC 61754-28) 1) At draft stage. BS EN 50516-3-1:2014EN 50516-3-1:2014 - 6 - Outline and maximum dimensions: ODVA connector plug with protective shell in sealed adaptor. factory terminated FSOC BS E

36、N 50516-3-1:2014- 7 - EN 50516-3-1:2014 1 Scope 1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which an ODVA (factory terminated) (Open DeviceNet Vendors Association) or ODVA fusion splice

37、on connector (FSOC) terminated with cylindrical composite titanium APC ferrules with one side protected by an industrial housing, an adaptor fitted with resilient alignment sleeve and patchcord shall meet in order for it to be categorised as an EN standard product. The product is rated IP67. Since d

38、ifferent variants are permitted, product marking details are given in 3.6. 1.2 Intermateability Products conforming to the requirements of this specification will inter mate and give the specified level of random attenuation and random return loss performance provided the same fibre type is used. Th

39、e intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants with different attenuation grades, the resulting level of attenuation cannot be assured to be any better than the worst attenuation grade. The intermating of a grade C plu

40、g with a grade B plug will result in an uncertain level of random attenuation performance. Table 1 Ensured level of random attenuation Plug variant/Attenuation grade C B C C C B C B 1.3 Operating environment The tests selected combined with the severities and durations, specified as Category I, are

41、intended to reflect, although they do not necessarily satisfy all the requirements of, the boundary conditions of M3I3C3E3. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliabi

42、lity of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. BS EN

43、 50516-3-1:2014EN 50516-3-1:2014 - 8 - 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r

44、eferenced document (including any amendments) applies. EN 60068-2-60 Environmental testing Part 2: Tests Test Ke: Flowing mixed gas corrosion test (IEC 60068-2-60) EN 60529 Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60874-1 Fibre optic interconnecting devices and passive c

45、omponents Connectors for optical fibres and cables Part 1: Generic specification (IEC 60874-1) EN 61300-2-1 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-2 Fibre optic interconnecting

46、 devices and passive components Basic test and measurement procedures Part 2-2: Tests Mating durability (IEC 61300-2-2) EN 61300-2-4 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention (IEC 61300-2-4) EN 61300-2-5 Fib

47、re optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests Torsion (IEC 61300-2-5) EN 61300-2-6 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-6: Tests Tensile strength of coupling mechanism (

48、IEC 61300-2-6) EN 61300-2-7 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-7: Tests Bending moment (IEC 61300-2-7) EN 61300-2-9 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Sh

49、ock (IEC 61300-2-9) EN 61300-2-10 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-10: Tests Crush resistance (IEC 61300-2-10) EN 61300-2-12:2005 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-12: Tests Impact (IEC 61300-2-12:2005) EN 61300-2-22 Fibre o