EN 15239-2007 en Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems《建筑物用通风 建筑物的能量性能 通风系统的检验指南》.pdf

《EN 15239-2007 en Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems《建筑物用通风 建筑物的能量性能 通风系统的检验指南》.pdf》由会员分享，可在线阅读，更多相关《EN 15239-2007 en Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems《建筑物用通风 建筑物的能量性能 通风系统的检验指南》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 15239:2007Ventilation for buildings Energy performance of buildings Guidelines for inspection of ventilation systemsICS 91.140.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40

2、g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15239:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2008 BSI 2008ISBN 978 0 580 55020 1National forewordThis British Standard is the UK implementation of EN 15239:2007. Th

3、e UK participation in its preparation was entrusted to Technical Committee RHE/2, Ventilation for buildings, heating and hot water services. A list of organizations represented on this committee can be obtained on request to its secretary. It should be noted that Article 9 of the Energy Performance

4、of Buildings Directive 2002/91/EC only requires inspection of air conditioning systems of effective rated output of more than 12 kW. The directive defines an air conditioning system as: “a combination of all components required to provide a form of air treatment in which the temperature is controlle

5、d or can be lowered, and includes systems which combine such air treatment with the control of ventilation, humidity and air cleanliness.” BS EN 15240 deals with inspection of air conditioning systems as defined in the above Directive, this standard deals solely with the inspection of “ventilation s

6、ystems” which at the present time are not a requirement of the Directive. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amen

7、dments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15239May 2007ICS 91.140.30English VersionVentilation for buildings - Energy performance of buildings -Guidelines for inspection of ventilation systemsVentilation des btiments - Performance nergti

8、que desbtiments - Lignes directrices pour linspection dessystmes de ventilationLftung von Gebuden - Gesamtenergieeffizienz vonGebuden - Leitlinien fr die Inspektion vonLftungsanlagenThis European Standard was approved by CEN on 26 March 2007.CEN members are bound to comply with the CEN/CENELEC Inter

9、nal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member

10、.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are

11、 the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerla

12、nd and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15239

13、:2007: EEN 15239:2007 (E) 2 Contents Page Foreword. 3 Introduction 4 1 Scope 5 2 Normative references . 5 3 Terms and definitions. 5 4 Inspection 7 4.1 Pre inspection and documents collection7 4.2 Methodology of inspection on site 7 4.3 Report of analysis . 12 5 Advice for improvements. 13 Annex A (

14、informative) Example of description form of the installation. 14 Annex B (informative) Example of data sheet report. 16 Annex C (informative) Example of air inlets / outlets selection for measurements of airflow rates 17 Annex D (informative) Example of time frequency inspection . 18 Annex E (inform

15、ative) Main impacts on energy consumption 19 E.1 Introduction . 19 E.2 Uncontrolled ventilation due to air leakage . 19 E.3 Windows opening . 19 E.4 Local air supply and exhaust. 20 E.5 Ducting. 20 E.6 Dampers. 21 E.7 Air handling unit/fan . 21 Annex F (informative) Frequency of inspection . 23 Anne

16、x G (informative) Examples of elements for classes definitions . 25 Annex H (informative) Recommendations for the extent of the inspection 26 H.1 General. 26 H.2 List of items for inspection in each class (C, B, A) . 26 Annex I (informative) Description chart of the improvement process. 37 Annex J (

17、informative) Examples for advice on improvements. 38 J.1 Basic improvements. 38 J.1.1 General. 38 J.1.2 Natural ventilation. 38 J.1.3 Mechanical exhaust or supply. 38 J.1.4 Mechanical supply and exhaust, heat recovery 39 J.2 Further improvements 40 J.2.1 Natural and hybrid ventilation . 40 J.2.2 Mec

18、hanical exhaust or supply. 41 J.2.3 Mechanical supply and exhaust, heat recovery 42 Bibliography . 44 BS EN 15239:2007EN 15239:2007 (E) 3 Foreword This document (EN 15239:2007) has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings”, the secretariat of which is held by BSI. T

19、his European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2007, and conflicting national standards shall be withdrawn at the latest by November 2007. The connections and relations to the different d

20、raft standards developed in the EPBD project are presented in the umbrella document of the CEN BT 173. This standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/343), and supports essential requirements of EU Directive

21、2002/91/EC on the energy performance of buildings (EPBD). It forms part of a series of standards aimed at European harmonisation of the methodology for the calculation of the energy performance of buildings. An overview of the whole set of standards is given in CEN/TR 15615, Explanation of the gener

22、al relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD) (“Umbrella document“). Attention is drawn to the need for observance of all relevant EU Directives transposed into national legal requirements. Existing national regulations with or without referen

23、ce to national standards, may restrict for the time being the implementation of the European Standards mentioned in this report. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

24、Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15239:2007EN

25、 15239:2007 (E) 4 Introduction Energy Performance of Buildings Directive (EPBD) identifies clearly ventilation, in article 2 “Definitions” and 3 “Adoption of a methodology” (for the calculation of the energy performance), as a component of the energy consumption of buildings, such as heating, coolin

26、g or lighting. EPBD also mentions in article 4, “Setting of energy performance requirements” that “requirements shall take account of general indoor climate conditions, in order to avoid negative effects such as inadequate ventilation”. Considering the impact of ventilation on the energy consumption

27、 of the buildings, CEN has decided to also develop a methodology concerning the inspection of ventilation systems, as it is made for air conditioning and heating systems, following the requirements of the articles 3, 8 and 9 of EPBD. The inspection described here, is therefore intended to include al

28、l types of ventilation systems mechanical, natural and hybrid (including mechanical and natural ventilation). Starting from the general points that may lead to excessive energy consumption, a list of the corresponding checks according to the nature of the ventilation system is given. Other specific

29、points depending more from the typology of the ventilation system are then detailed. Indications on the frequency of inspection and on the improvements that may appear necessary depending on the results of the diagnostic are also given. The possibility to introduce classes is given in this standard

30、in order to leave Member States freedom to choose between different objectives and extent of inspection, within a harmonised framework. All inspection activities undertaken should be subject to compliance with all health and safety requirements for the persons involved. This standard also complement

31、s EN 15240 concerning the inspection of air conditioning systems for the inspection of the ventilation part that is to be performed in relation to 4.2 dealing with mechanical exhaust and/or supply ventilation systems. BS EN 15239:2007EN 15239:2007 (E) 5 1 Scope This standard develops the methodology

32、 required for the inspection of mechanical and natural ventilation systems in relation to its energy consumption. This standard applies to both residential and non residential buildings. The inspection may include the following issues, in order to determine the energy performance of the building and

33、 its associated mechanical / electrical plant: The system conformity related to the original and subsequent design modifications, actual requirements and the present building state. Correct operation of the mechanical, electrical or pneumatic components. Provision of an adequate and pure supply of v

34、entilation air. The functioning of all the controls involved. Fan power absorbed and specific fan power. Building air tightness. It is not the intention of the standard to provide a full ventilation system audit. Its purpose is to assess its functioning and its impact on energy consumption. It inclu

35、des recommendations on possible system improvements. NOTE The inspection, performed by an independent person to assess the system performance relating to energy consumption, is different from the maintenance that is performed to the owners requirements to maintain the optimum system performance. 2 N

36、ormative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12097, Ventilation for Bui

37、ldings Ductwork Requirements for ductwork components to facilitate maintenance of ductwork systems EN 12792:2003, Ventilation for buildings Symbols, terminology and graphical symbols 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12792:2003 and the f

38、ollowing apply. 3.1 centralised ventilation ventilation of a space or spaces within a building by means of supply ductwork, extract ductwork or a combination of both, from a centralized plant room BS EN 15239:2007EN 15239:2007 (E) 6 3.2 inspection inspection, in the manner of this standard means to

39、examine the ventilation systems in buildings 3.3 local ventilation ventilation of a set area of a space by means of supply ductwork, extract ductwork or a combination of both NOTE Local ventilation can also be achieved by means of natural wall or roof inlets or outlets or by mechanical means by a fa

40、n or fans in the perimeter wall, internal wall, or roof. 3.4 assumptions set of descriptions to be considered by the person in charge of the inspection, if the actual requirements are difficult to identify in the analysis 3.5 building system control measures taken in ensuring the system operates in

41、accordance with the specified conditions 3.6 commissioning sequence of events necessary to ensure the building and its associated heating, ventilation and air conditioning systems are functioning in accordance with the design parameters 3.7 design criteria set of descriptions based on a particular e

42、nvironmental element such as indoor air quality, thermal, acoustical, and visual comfort, energy efficiency and the associated system controls to be used for assessing the plant operation 3.8 control parameters set values of the internal environmental conditions related to the external conditions 3.

43、9 design documentation written description of the essential design elements of the plant 3.10 self regulating valve terminal component (for example: self adjustable air transfer device) or aerodynamic ductwork (for example: regulator of flow rate) allowing to insure a constant flow rate on a pressur

44、e operating range in NOTE Some valves are designed with two flow rates (a nominal flow rate and a reduced nominal flow rate). BS EN 15239:2007EN 15239:2007 (E) 7 4 Inspection 4.1 Pre inspection and documents collection To prepare a site survey for the inspection of a ventilation system and to provid

45、e the best available information regarding the building and its use, the following information is required: Last available design documents, giving the internal and external temperatures and design occupancy, heat gains and losses. Information regarding the areas to be ventilated naturally, mechanic

46、ally, heated or humidified. Information regarding building use, occupancy and frequency of occupation in comparison to the notice of the manufacturer and model (type) of the ventilation system. System manufacturer and model (type). Rated operating pressure. Rated operating temperatures. Working hour

47、s. Air volume rates (supply and extract). Areas / volumes supplied. Technical drawings or schematics of the mechanical ventilation system. Copies of any log book documentation of Air Handling Unit (AHU) from the servicing organisation. If a building management system is installed, information regard

48、ing the equipment and controlled systems is to be supplied. Copies of commissioning reports and the last inspection report. Records on maintenance of air supply systems, including filter cleaning and exchange and cleaning of the heat exchangers. In the case of no available documents, the minimum inf

49、ormation regarding the ventilation shall be provided. NOTE An example of information list is given in Annex A. 4.2 Methodology of inspection on site 4.2.1 General approach 4.2.1.1 General There are considerable variations in the design and construction of installations and buildings. Each ventilation performance check shall therefore be adapted as far as possible for the individual building. However, the following points shall always be included in a ventilation performance check. The number of measurements and sampling