EN 716-2-2008 en Furniture - Children-s cots and folding cots for domestic use - Part 2 Test methods (Incorporates Amendment A1 2013)《家具 家用儿童床和折叠床 第2部分 试验方法》.pdf

《EN 716-2-2008 en Furniture - Children-s cots and folding cots for domestic use - Part 2 Test methods (Incorporates Amendment A1 2013)《家具 家用儿童床和折叠床 第2部分 试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 716-2-2008 en Furniture - Children-s cots and folding cots for domestic use - Part 2 Test methods (Incorporates Amendment A1 2013)《家具 家用儿童床和折叠床 第2部分 试验方法》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 716-2:2008Furniture Childrens cots and folding cots for domestic use Part 2: Test methodsICS 97.140; 97.190nullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnull nullnullnull nullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnull nullnull nullnullnullnull

2、nullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnullnull+A1:2013National forewordThis British Standard is the UK implementation of EN 716-2:2008+A1:2013. It supersedes BS EN 716-2:2008, which is withdrawn.The start and finish of text introduced or altered by amendment is indic

3、ated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee CW/1, Safety of child use and child care products, to Tec

4、hnical Subcommittee CW/1/5, Nursery furniture.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance wit

5、h a British Standard cannot confer immunity from legal obligations.BS EN 716-2:2008+A1:2013This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2008 The British Standards Institution 2013. Published by BSI Standards Limited 2013Amendments/

6、corrigenda issued since publicationDate Comments 28 February 2013 Implementation of CEN amendment A1:2013ISBN 978 0 580 70909 8EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 716-2:2008+A1 January 2013 ICS 97.140 English Version Furniture - Childrens cots and folding cots for domestic use - Par

7、t 2: Test methods Meubles - Lits nacelle fixes et pliants usage domestique pour enfants - Partie 2 : Mthodes dessai Mbel - Kinderbetten und Reisekinderbetten fr den Wohnbereich - Teil 2: Prfverfahren This European Standard was approved by CEN on 2 February 2008 and includes Amendment 1 approved by C

8、EN on 17 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa

9、rds may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and not

10、ified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, I

11、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Cen

12、tre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 716-2:2008+A1:2013: EEN 716-2:2008+A1:2013 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 General test conditions .5 3

13、.1 Preliminary preparation 5 3.2 Test equipment 5 3.3 Application of forces .6 3.4 Tolerances 6 3.5 Test sequence 6 3.6 Prevention of movement during test .6 4 Test apparatus .6 4.1 Measuring probes 6 4.2 Bottom impactor 7 4.3 Test mattress 8 4.4 Side impactor .8 4.5 Loading pad 9 4.6 Stops .9 4.7 F

14、loor surface . 10 4.8 Test chain and mass 10 4.9 Small parts cylinder 10 4.10 Test mass 11 4.11 Bite tester 11 4.12 Retaining block . 12 4.13 Foothold template . 12 4.14 Head probes 13 4.14.1 Small head probe 13 4.14.2 Large head probe 14 4.15 Template for V-shaped openings 14 4.16 Test dummy . 15 5

15、 Test procedures 15 5.1 Assembly and inspection 15 5.2 !Stability - test“ . 16 5.3 Footholds . 16 5.3.1 !Determination of a foothold“ 16 5.3.2 !Tests for footholds“ 18 5.3.3 !Measurement of distance between footholds and/or top of cot sides and ends“ 21 5.4 Measurements . 21 5.4.1 Holes, gaps and op

16、enings inside the cot . 21 5.4.2 Holes, gaps and openings on the outside of the cot 22 5.5 Small parts . 24 5.5.1 General . 24 5.5.2 Torque test 24 5.5.3 Tension test . 25 5.6 Bite test 25 5.7 !Tests for cot base and mattress base“ 26 5.7.1 !Folding test of the mattress base and cot base“ . 26 5.7.2

17、 !Strength of cot base and mattress base (impact test)“ 26 5.8 Strength of sides and ends 27 5.8.1 Static load test of !deleted text“ slats (bending test) 27 BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 3 5.8.2 Strength of sides or side slats (impact test). 27 5.8.3 Strength of corners (impact

18、test) . 30 5.8.4 Strength of mesh and flexible sides and ends (static load test) 30 5.9 Strength of frame and fastenings 31 5.9.1 Vertical static load test . 31 5.9.2 Durability test . 32 5.10 Snag points 33 5.11 Locking mechanisms 33 5.11.1 Durability 33 5.11.2 Strength 33 5.12 Stability test . 33

19、6 Test report 33 Annex A (informative) !Adeviations“ . 35 Bibliography 36 BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 4 Foreword This document (EN 716-2:2008+A1:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standar

20、d shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this docu

21、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 716-2:2008.“ This document includes Amendment 1 approved by CEN on 17 November 2012. The start and finish of text introduced or alter

22、ed by amendment is indicated in the text by tags !“. Significant technical differences between this edition and EN 716-2:1995 are as follows: a) Following items were made more concrete or introduced: Test equipment (3.2), Application of forces (3.3), Tolerances (3.4) and under Test equipment (4), Te

23、st mattress (4.3), Device for bite test (4.11), Template for foot hold (4.13), Head probes (4.14), Testing device for V-shaped openings (4.15) and Retaining block (4.12); b) Elaboration and specification of the test procedures (5), Assembly and inspection (5.1), for the measurements of closed openin

24、gs testing with at test probe (5.3.2.1) and measurement of V-shaped openings testing with a test probe (5.3.2.2) were introduced, Small parts (5.4), Bite test (5.5), Strength of sides and ends (5.7), Snag points (5.9) and Locking mechanisms (5.11); c) Testing of brakes of the rollers and test chain

25、with disc were deleted; d) Revised editorially and with regard to content. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

26、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 716-2:

27、2008+A1:2013EN 716-2:2008+A1:2013 (E) 5 1 Scope This part of EN 716 specifies test methods for assessing the safety of childrens cots and folding cots for domestic use. It applies to childrens cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm. 2 Normative r

28、eferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 2439:2000, Flexible cellular pol

29、ymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998) ISO 7619-2, Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method 3 General test conditions 3.1 Preliminary preparation Th

30、e tests are designed to be applied to a cot that is fully assembled and ready for use. The test unit shall be stored in indoor ambient conditions for at least one week immediately prior to testing. Any deviation from this procedure shall be stated in the test report. Before testing, any fabrics inte

31、nded to be removable shall be cleaned or washed twice in accordance with the manufacturers instructions. If no instructions are supplied, the manner of washing/cleaning shall be stated in the test report. The tests shall be carried out under indoor ambient conditions, but if during a test the atmosp

32、heric temperature is outside the range 15 C to 25 C, the maximum and/or minimum temperature shall be recorded in the test report. The cot shall be tested as delivered. If the cot is a knock down type, it shall be assembled according to the manufacturers instructions supplied with the cot. If the cot

33、 can be assembled, combined or adjusted in different ways, the most adverse combination shall be used for each test. Knock-down fittings shall be tightened before testing. Further re-tightening shall not take place unless this is specifically required by the manufacturer. In the case of designs not

34、catered for in the test procedures, the tests shall be carried out as far as possible as described, and a list made of the deviations from the test procedures. 3.2 Test equipment Unless otherwise specified, the tests may be applied by any suitable device because results are dependent only upon corre

35、ctly applied forces and loads and not upon the apparatus. BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 6 The equipment shall not inhibit the deformation of the cot during testing. It shall be able to move so that it can follow the deformation of the cot during testing, so that the loads are alw

36、ays applied at the specified point and in the specified direction. All loading pads shall be capable of pivoting in relation to the direction of the applied force. The pivot point shall be as close as practically possible to the load surface. 3.3 Application of forces The forces in the static load t

37、ests shall be applied sufficiently slowly enough to ensure that negligible dynamic force is applied. The forces in durability tests shall be applied at a rate to ensure that excessive heating does not occur. 3.4 Tolerances Unless otherwise stated, the following tolerances apply: Forces: 5 % of the n

38、ominal force; Masses: 0,5 % of the nominal mass; Dimensions: 1,0 mm of the nominal dimension; Angles: 2 of the nominal angle; Positioning of loading pads: 5 mm; Duration of forces: ( 2 1) s for durability tests (10 2) s for static load tests, including tension, torque and bite tests. The tests are d

39、escribed in terms of the application of forces. Masses can, however, be used. The relationship 10 N = 1 kg shall be used for this purpose. 3.5 Test sequence The tests shall be carried out in the order laid down in this standard and on the same cot. 3.6 Prevention of movement during test If the cot t

40、ends to slide or roll during the tests specified in clause 5, it shall be restrained by stops (4.6). 4 Test apparatus 4.1 Measuring probes Probes made of plastics or other hard, smooth material mounted on a force-measuring device. There shall be one probe with a diameter of 7 mm (-0,1/+0 mm), see Fi

41、gure 1a. There shall be five probes with an angle of 30 0,5 with diameters of 25 mm (0/+0,1 mm), 45 mm (0/+0,1 mm), 60 mm (0/+0,1 mm), 65 mm (0/+0,1 mm) and 85 mm (0/+0,1 mm) with conical ends, see Figure 1b. BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 7 There shall be four cylindrical probes

42、with diameters of 5 mm (-0,1/+0 mm), 7 mm (-0,1/+0 mm), 12 mm (0/+0,1 mm) and 18 mm (0/+0,1 mm) with hemispherical ends, see Figure 1c. Figure 1 a 7 mm probe Figure 1 b Conical probes Figure 1 c Cylindrical probes Key 1 5 mm (-0,1/+0 mm), 7 mm (-0,1/+0 mm), 12 mm (0/+0,1 mm), 18 mm (0/+0,1 mm) Figur

43、e 1 4.2 Bottom impactor An impactor with a total mass of 10 kg of hardwood or equivalent material with a hemispherical end and with dimensions in accordance with Figure 2. The impactor shall be guided so that it is kept vertical and always falls on the impact point.BS EN 716-2:2008+A1:2013EN 716-2:2

44、008+A1:2013 (E) 8 Dimensions in millimetres Figure 2 Bottom impactor 4.3 Test mattress A PUR foam sheet with a thickness of 60 mm, a bulk density of (35 2) kg/m3and an indentation hardness index of (170 40) N in accordance with A.40 of EN ISO 2439:2000 and being at least 400 mm 800 mm in area but no

45、t larger than the mattress base of the cot under test. The test mattress shall have a cotton cover with a mass per unit area of 100 g/m2to 120 g/m2. 4.4 Side impactor A pendulum with a cylindrical head made of steel (Figure 3). The head of the pendulum shall be surrounded by a 10 mm thick layer of r

46、ubber of hardness 76 IRHD to 78 IRHD in accordance with ISO 7619-2. The total mass shall be 2 kg. BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 9 Dimensions in millimetres Key 1 Pivot point 2 Centre of gravity 3 Rubber 76 to 78 IRHD Figure 3 Side impactor 4.5 Loading pad A rigid cylindrical obje

47、ct, 100 mm in diameter, having a smooth hard surface and rounded edge with radius of 12 mm. 4.6 Stops Stops which prevent the article from sliding but not tilting, not higher than 12 mm except in cases where the design of the item necessitates the use of higher stops, in which case the lowest that w

48、ill prevent the item from sliding shall be used. BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 10 4.7 Floor surface Rigid, horizontal and flat surface. 4.8 Test chain and mass Ball chain with a ball diameter of (3,2 0,2) mm and a distance between ball centres of (4,0 0,2) mm (Figure 4), fixed to

49、 a 2,5 kg spherical weight with a diameter of 115 mm forming a loop in accordance with Figure 5. Dimensions in millimetres Figure 4 Ball chain Dimensions in millimetres Key 1 Ball chain 2 Weight, mass 2,5 kg 3 Fixing point Figure 5 Test chain and mass 4.9 Small parts cylinder For assessment of small components, having dimensions in accordance with Figure 6. NOTE The cylinder is identical to the one specified in EN 71-1 1. BS EN 716-2:2008+A1:2013EN 716-2:2008+A1:2013 (E) 11 Dimensions in millim