EN 3902-2016 en Aerospace series - Washers for rivet assemblies in aluminium alloy anodized metric series《航空航天系列-用于柳钉的垫圈铝合金阳极处理米制》.pdf

《EN 3902-2016 en Aerospace series - Washers for rivet assemblies in aluminium alloy anodized metric series《航空航天系列-用于柳钉的垫圈铝合金阳极处理米制》.pdf》由会员分享，可在线阅读，更多相关《EN 3902-2016 en Aerospace series - Washers for rivet assemblies in aluminium alloy anodized metric series《航空航天系列-用于柳钉的垫圈铝合金阳极处理米制》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 3902:2016Aerospace series Washersfor rivet assemblies, inaluminium alloy, anodized,metric seriesBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 3902:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3902:2016. The

2、UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

3、contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 92615 0 ICS 49.030.50 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under t

4、he authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 3902:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3902 December 2016 ICS 49.030.50 English Version Aerospace series - Washers for

5、 rivet assemblies, in aluminium alloy, anodized, metric series Srie arospatiale - Rondelles pour assemblages par rivets, en alliage daluminium, anodises, srie mtrique Luft- und Raumfahrt - Scheiben fr Nietverbindungen, aus Aluminiumlegierung, anodisiert, metrische ReiheThis European Standard was app

6、roved by CEN on 12 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

7、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

8、and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun

9、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENE

10、LEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3902:2016 EBS EN 3902:2016EN 3902:2016 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Requi

11、red characteristics 4 4 Designation . 6 5 Marking . 6 6 Quality assurance 6 BS EN 3902:2016EN 3902:2016 (E) 3 European foreword This document (EN 3902:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried

12、 out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by p

13、ublication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC sh

14、all not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

15、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3902:2

16、016EN 3902:2016 (E) 4 1 Scope This European Standard specifies the characteristics of washers for rivet assemblies, in aluminium alloy, anodized, metric series, for maximum operating temperature 120 C, for aerospace applications. 2 Normative references The following documents, in whole or in part, a

17、re normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2090, Aerospace series Aluminium alloy AL-P2024- T3

18、 Clad sheet and strip 0,3 mm a 6 mm EN 2091, Aerospace series Aluminium alloy 2024-T4 Clad sheet and strip 0,4 a 6 mm 1)EN 2284, Aerospace series Sulphuric acid anodizing of aluminium and wrought aluminium alloys EN 2320, Aerospace series Aluminium alloy 2024-T4 Drawn bar a 75 mm 1)EN 2321, Aluminiu

19、m alloy 2024-T3 Bars and sections a 150 mm Aerospace series 1)EN 2424, Aerospace series Marking of aerospace products EN 9100, Aerospace series Quality Management Systems Requirements for Aviation, Space and Defence Organizations 3 Required characteristics 3.1 Configuration Dimensions Masses See Fig

20、ure 1 and Table 1. Dimensions and tolerances are in millimetres and apply after surface treatment. 3.2 Materials EN 2090, EN 2091, EN 2320 or EN 2321 3.3 Surface treatment EN 2284B 1) Published as ASD-STAN Standard at the date of publication of this standard by AeroSpace and Defence industries Assoc

21、iation of Europe - Standardization (ASD-STAN) (www.asd-stan.org) BS EN 3902:2016EN 3902:2016 (E) 5 values in micrometres apply prior to surface treatment. Remove sharp edges 0,1 to 0,2. Figure 1 Table 1 Size code aCorresponding rivet diameter for information D1D2S Mass cNom. H13 H14 10 % b 015 1,6 1

22、,8 5 0,8 0,038 020 2 2,2 6 0,055 025 2,5 2,7 8 0,100 030 3 3,2 9 1 0,156 035 3,5 3,7 10 0,190 040 4 4,2 12 0,278 050 5 5,2 15 1,6 0,696 060 6 6,2 18 0,968 080 8 8,2 24 1,789 aCorresponds to the nominal diameter. bIncludes also the flatness tolerance. cApproximate values (kg/1 000 pieces), calculated

23、 on the basis of 2,8 kg/dm3, for information purposes only. Ramax 6,3 BS EN 3902:2016EN 3902:2016 (E) 6 4 Designation EXAMPLE Description block WASHER Identity block EN3902-080 Number of this standard Size code (see Table 1) NOTE If necessary, the code I9005 shall be placed between the description b

24、lock and the identity block. 5 Marking EN 2424, style G 6 Quality assurance EN 9100 This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British S

25、tandards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowle

26、dge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that

27、your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international stand

28、ards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, includin

29、g British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, y

30、ou may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards pur

31、chased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any

32、 one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy.

33、 This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications c

34、ontact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted Euro

35、pean and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becomin

36、g a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit

37、a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur Bri

38、tish Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful Co

39、ntactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20