EN 14303-2015 en Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification《应用于建筑设备和工业设施的热绝缘产品 工厂生产的矿.pdf

《EN 14303-2015 en Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification《应用于建筑设备和工业设施的热绝缘产品 工厂生产的矿.pdf》由会员分享，可在线阅读，更多相关《EN 14303-2015 en Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification《应用于建筑设备和工业设施的热绝缘产品 工厂生产的矿.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 14303:2015Thermal insulation productsfor building equipment andindustrial installations Factory made mineral wool(MW) products SpecificationBS EN 14303:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14303:2015. It supersedes

2、BS EN 14303:2009+A1:2013 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication

3、does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88445 0 ICS 91.100.60 Compliance with a British Standard cannot confer immunity from

4、 legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 14303:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14303 December

5、2015 ICS 91.100.60 Supersedes EN 14303:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Pr

6、oduits manufacturs base de laines minrales (MW) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN m

7、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic

8、ation to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Mana

9、gement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi

10、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix

11、 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14303:2015 EBS EN 14303:2015EN 14303:2015 (E) 2 Contents Page European foreword . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols, units a

12、nd abbreviated terms . 7 3.1 Terms and definitions . 7 3.2 Symbols, units and abbreviated terms 9 4 Requirements 10 4.1 General . 10 4.2 For all applications 10 4.3 For specific applications 14 5 Test methods . 16 5.1 Sampling 16 5.2 Conditioning . 16 5.3 Testing 16 6 Designation code 19 7 Assessmen

13、t and Verification of the Constancy of Performance (AVCP) . 19 7.1 General . 19 7.2 Product Type Determination (PTD) 20 7.3 Factory Production Control (FPC) 20 8 Marking and labelling . 20 Annex A (normative) Factory production control . 21 Annex B (informative) Additional Properties . 25 B.1 Genera

14、l . 25 B.2 Density . 25 B.3 Flatness 25 B.4 Airflow resistivity 25 B.5 Dynamic stiffness . 25 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 27 ZA.1 Scope and relevant characteristics 27 ZA.2 Procedures for AVCP of factor

15、y made mineral wool products 29 ZA.3 CE Marking and labelling . 36 Bibliography . 38 BS EN 14303:2015EN 14303:2015 (E) 3 European foreword This document (EN 14303:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by

16、 DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that s

17、ome of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14303:2009+A1:2013. This document is identifying those clauses of the standard which are needed for th

18、e compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14303 are the following: a) an addition to the foreword; b) modification to 3.2.1; c) an addition in 3.2.2; d) a new 4.3.9; e) modification

19、of 5.3.2; f) modification of Clause 7; g) modification of Clause 8; h) modification of Annex A; i) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) N

20、o. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, a

21、re allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains three

22、annexes: Annex A (normative), Factory production control; Annex B (informative), Additional properties; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. BS EN 14303:2015EN 14303:2015 (E) 4 This document includes a bibliog

23、raphy. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standard

24、s listed below as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifica

25、tions of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equip

26、ment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building e

27、quipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for buil

28、ding equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN

29、 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 1550

30、1, Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to

31、 implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

32、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14303:2015EN 14303:2015 (E) 5 1 Scope This European Standard specifies the requirements for factory made mineral wool products, which are used for the thermal insulation of building equipment and industrial i

33、nstallations with an operating temperature range of approximately 0 C to + 800 C. Below an operating temperature of ambient, special means against water vapour diffusion and water accumulation by air flow might be required. Below an operating temperature of - 50 C, special tests regarding the suitab

34、ility of the products in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured with or without facings or coatings, in the form of rolls, boards, slabs, mats, felts, quilts, wired mats, lamella mats, beve

35、lled lags and pipe sections. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performanc

36、e of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in re

37、gulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for in situ insulation (blowing or pouring) or products for the insulation of the building structure.

38、This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. Fo

39、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for buil

40、ding applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 826, Thermal insulating products for building applications - Determination of compression behaviour EN 1604, Thermal insulating products for building applicat

41、ions - Determination of dimensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building applications - Determination of short term water absorption by partial immersion EN 12086:2013, Thermal insulating products for building applications -

42、Determination of water vapour transmission properties BS EN 14303:2015EN 14303:2015 (E) 6 EN 12667, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance

43、EN 12939, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance EN 13162, Thermal insulation products for buildings - Factory made mineral wool (MW)

44、 products - Specification EN 13172:2012, Thermal insulation products - Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating

45、products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH EN 13469, Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission pr

46、operties of preformed pipe insulation EN 13472, Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation EN 13501-1:2007+A1:2009, Fire classification of construction products and b

47、uilding elements - Part 1: Classification using data from reaction to fire tests EN 13820, Thermal insulating materials for building applications - Determination of organic content EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal att

48、ack by a single burning item EN 14706, Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature EN 14707, Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperatu

49、re for preformed pipe insulation EN 15715:2009, Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products EN ISO 354, Acoustics - Measurement of sound absorption in a reverberation room (ISO 354) EN ISO 1182, Reaction to fire tests for products - Non-combustibility test (ISO 1182) EN ISO 1716, Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716) EN ISO 8497, Thermal insulation - Determinatio