EN 13915-2007 en Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions requirements and test methods《带蜂窝纸板芯的预制石膏板面板 定义 要求和试验方法》.pdf

《EN 13915-2007 en Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions requirements and test methods《带蜂窝纸板芯的预制石膏板面板 定义 要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 13915-2007 en Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions requirements and test methods《带蜂窝纸板芯的预制石膏板面板 定义 要求和试验方法》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 13915:2007Prefabricated gypsum plasterboard panels with a cellular paperboard core Definitions, requirements and test methodsThe European Standard EN 13915:2007 has the status of a British StandardICS 91.100.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51

2、g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13915:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2007ISBN 978 0 580 58196

3、0National forewordThis British Standard is the UK implementation of EN 13915:2007.The UK participation in its preparation was entrusted by Technical Committee B/544, Plastering, rendering, dry lining, to Subcommittee B/544/2, Gypsum based boards and ancillaries.A list of organizations represented on

4、 this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued s

5、ince publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13915September 2007ICS 91.100.10English VersionPrefabricated gypsum plasterboard panels with a cellularpaperboard core - Definitions, requirements and test methodsPanneaux de cloison prfabriqus en plaques de pltr

6、e me cellulaire en carton - Dfinitions, prescriptions etmthodes dessaiGipsplatten-Wandbaufertigtafeln mit einemKartonwabenkern - Begriffe, Anforderungen undPrfverfahrenThis European Standard was approved by CEN on 9 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulation

7、s which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European

8、 Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national

9、standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

10、Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13915:2007: EEN 139

11、15:2007 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Requirements.7 5 Test methods9 6 Evaluation of conformity.17 7 Designation of the prefabricated gypsum plasterboard panels .19 8 Marking, labelling and packaging 20 Annex A (informat

12、ive) Sampling procedure for testing.21 Annex B (normative) Mounting and fixing in the test according to EN 13823 (SBI test) .23 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives25 EN 13915:2007 (E) 3 Foreword This document

13、 (EN 13915:2007) has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

14、March 2008, and conflicting national standards shall be withdrawn at the latest by June 2009. This European standard includes: informative Annex A concerning sampling procedure for testing; normative Annex B concerning SBI mounting and fixing for prefabricated panels made of plasterboard facings and

15、 a cellular paperboard core. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the na

16、tional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway

17、, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 13915:2007 (E) 4 Introduction Figure 1 and Figure 2 show the relationship between this standard and the package of standards prepared to support the families of gypsum and ancillary products. Figur

18、e 1 Family of gypsum products EN 13915:2007 (E) 5 Figure 2 Family of ancillary products EN 13915:2007 (E) 6 1 Scope This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core in

19、tended to be used as a lightweight partition, lining and encasement for general use in buildings. This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding Eu

20、ropean test methods. This Standard covers only prefabricated panels installed so that the core is not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire

21、resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical charact

22、eristics that are of importance for the use and acceptance of the product by the Building Industry. It provides for the evaluation of conformity of the products to this document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dat

23、ed references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 520, Gypsum plasterboards Definitions, requirements and test methods EN 12524, Building materials and products Hygrothermal properties Tabulated

24、 design values EN 12664, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Dry and moist products of medium and low thermal resistance EN 13501-1, Fire classification of construction products and build

25、ing elements Part 1: Classification using data from reaction to fire tests EN 13501-2, Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13823, Reaction to fire tests for building product

26、s Building products excluding floorings exposed to the thermal attack by a single burning item EN 13963, Jointing materials for gypsum plasterboards Definitions, requirements and test methods EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Labora

27、tory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 354, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation

28、 (ISO 717-1:1996) EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) EN 13915:2007 (E) 7 EN ISO 11925-2, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2:2002) EN ISO 12572, Hygrothe

29、rmal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) ISO 7892, Vertical building elements Impact resistance tests Impact bodies and general test procedures. 3 Terms and definitions For the purposes of this document, the following

30、terms and definitions apply. 3.1 prefabricated gypsum plasterboard panel panel that is made up of two gypsum plasterboards according to EN 520, possibly up to 15 mm thick, bonded to both sides of a cellular paperboard core NOTE It is commonly named “panel“ in this standard. 3.2 panel facing exposed

31、surface of plasterboard to receive either coating or finishing 3.3 length dimension of the panel parallel to the paper covered edges, measured on the panel facing 3.4 width dimension of the panel perpendicular to the paper covered edges, measured on the panel facing 3.5 thickness distance between th

32、e panel facings 4 Requirements 4.1 Fire behaviour 4.1.1 Reaction to fire When subject to regulatory requirements, prefabricated gypsum plasterboard panels shall be tested and classified in accordance with EN 13501-1. Prefabricated gypsum plasterboard panels tested according to EN 13823 (SBI test) sh

33、all be mounted and fixed in accordance with Annex B or when the producer wishes to claim performance for a specific intended use, the mounting and fixing shall be representative of that intended use. Prefabricated gypsum plasterboard panels tested according to EN ISO 11925-2 (Ignitability) shall be

34、tested with surface attack only due to the fact that edge attack cannot occur in end use conditions. 4.1.2 Fire resistance NOTE Resistance to fire is a characteristic dependent on an assembled system and not of the product in isolation. When required, the fire resistance of a system including prefab

35、ricated gypsum plasterboard panels shall be classified according to EN 13501-2. EN 13915:2007 (E) 8 4.2 Impact resistance NOTE Impact resistance is a characteristic dependent on an assembled system and not of the product in isolation. When the manufacturer wishes to declare the impact resistance per

36、formance of a system that includes prefabricated gypsum plasterboard panels, the performance of the system shall be determined in accordance with ISO 7892. 4.3 Water vapour permeability (expressed as water vapour resistance factor) Water vapour permeability is not a characteristic of heterogeneous p

37、roducts like panels therefore water vapour resistance is used instead. When the manufacturer wishes to declare a performance for moisture diffusion control, tabulated design values of water vapour resistance for gypsum plasterboards given in EN 12524 may be used for calculation. Alternatively, the w

38、ater vapour resistance factor shall be determined in accordance with EN ISO 12572. 4.4 Flexural strength (expressed as deflection under a defined load) When determined in accordance with the test method described in 5.4, the deflection shall not exceed the values given in Table 1. Table 1 Deflection

39、 values Panel thickness Deflection (max) mm mm 50 50 mm: applied load 2 500 N; thickness 50 mm: applied load 1 875 N; b) 900 mm panels: applied load 1 875 N; c) 600 mm panels: applied load 1 250 N; d) for other widths, applied load 2 083 N/m width. Read the deflection in the centre of the loaded pan

40、el when the required load is reached. 5.4.4 Expression of results Calculate the average deflection of the three specimens and compare it with the value stated in Table1. 5.5 Determination of the core adhesion 5.5.1 Principle The bonding strength between the core and the gypsum plasterboards shall be

41、 measured. 5.5.2 Apparatus Testing device allowing a loading rates of 3 kN/min (see Figure 5). 5.5.3 Procedure Cut out the 230 mm 230 mm specimens from one panel (see Figure 5). In the case of discontinuous core panels, the specimen shall include a complete section of core. Introduce the boards of t

42、he specimen in clamps. Reduce the testing surface to 200 mm 200 mm by removing the core from the perimeter. Apply the tensile load continuously at the rate of 3 kN/min until rupture. Record the maximum load. Repeat for the other two specimens. EN 13915:2007 (E) 14 5.5.4 Expression of results Calcula

43、te the average adhesion of the three specimens and compare it to the values stated in 4.9. Divide the maximum load in Newtons for each specimen by the testing surface (4 104mm2) to give the core adhesion in MPa. Dimensions in millimetres Key 1 One panel 2 3 specimens 230 mm 230 mm 3 One specimen 4 A

44、dhesion test specimen 5 Flexural strength test specimen 6 Dynamometer 7 Dynamometer 8 Fixed clamp Figure 5 Determination of flexural strength and core adhesion EN 13915:2007 (E) 15 5.6 Determination of surface hardness of the panel 5.6.1 Principle The damage caused by the impact of a small steel sph

45、ere shall be measured. 5.6.2 Apparatus a) 50 mm diameter steel sphere of 510 g 10 g mass; b) rigid, flat and horizontal table to support the whole surface of the specimen with an inertia enough to withstand the impact (e.g. steel table 20 mm thick); c) carbon paper; d) graduated rule with 0,5 mm acc

46、uracy; e) support for the steel sphere. 5.6.3 Procedure 5.6.3.1 Preparation of specimen Cut one specimen measuring 300 mm 400 mm from one board. Condition the specimen to constant mass1). 5.6.3.2 Testing Place the specimen, face up, on the rigid table and cover it with the carbon paper (see Figure 6

47、). Then place the sphere between the clamps of the support at 500 mm 5 mm high from the gypsum plasterboard (see Figure 6). Let the sphere fall down the specimen (see Figure 6). Then take off the carbon paper and measure to the nearest mm, the diameter of the coloured impact onto the gypsum plasterb

48、oard (see Figure 6). 1) Constant mass is defined as two successive weighings 24 h apart, differing by less than 0,1 %. EN 13915:2007 (E) 16 Dimensions in millimetres Key 1 Rigid table 2 Specimen (board) 3 Face of the board 4 Carbon paper 5 Steel sphere 6 Coloured impact Figure 6 Surface hardness tes

49、t procedure EN 13915:2007 (E) 17 Repeat this test three times on the same specimen. 5.6.4 Expression of results Calculate the mean of the three measured values to the nearest mm. The surface hardness of the panel is characterised by this mean value. 6 Evaluation of conformity 6.1 General The compliance of prefabricated gypsum plasterboard panels with the requirements of this standard and with the stated values (including classes) shall be demonstrated by: initial Type Testing (ITT); factory Produc