EN 13428-2004 en Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction《包装 生产和组成的特殊要求 资源减少的预防》.pdf

《EN 13428-2004 en Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction《包装 生产和组成的特殊要求 资源减少的预防》.pdf》由会员分享，可在线阅读，更多相关《EN 13428-2004 en Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction《包装 生产和组成的特殊要求 资源减少的预防》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13428:2004 Packaging Requirements specific to manufacturing and composition Prevention by source reduction The European Standard EN 13428:2004 has the status of a British Standard ICS 13.030.99; 55.020 BS EN 13428:2004 This British Standard was published under the authority of

2、 the Standards Policy and Strategy Committee on 3 August 2004 BSI 3 August 2004 ISBN 0 580 44190 3 National foreword This British Standard is the official English language version of EN 13428:2004. It supersedes BS EN 13428:2000 which is withdrawn. The UK participation in its preparation was entrust

3、ed to Technical Committee PKW/4, Packaging and the environment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred t

4、o in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions

5、of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or pr

6、oposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 25 and a back cover. The BSI copyright notice di

7、splayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13428 July 2004 ICS 13.030.99; 55.020 Supersedes EN 13428:2000 English version Packaging - Requirements specific to ma

8、nufacturing and composition - Prevention by source reduction Emballage - Exigences spcifiques la fabrication et la composition - Prvention par la rduction la source Verpackung - Spezifische Anforderungen an die Herstellung und Zusammensetzung - Ressourcenschonung durch Verpackungsminimierung This Eu

9、ropean Standard was approved by CEN on 5 May 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conc

10、erning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own

11、 language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

12、rg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of expl

13、oitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13428:2004: EEN 13428:2004 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Requirements.7 4.1 Application .7 4.2 Packaging assessment .7 4.2.1

14、General7 4.2.2 Determination of critical area .7 4.2.3 Determination of presence of dangerous substances or preparations.8 4.2.4 Determination of the four named heavy metals .8 4.3 Demonstration of Conformity.8 4.3.1 Demonstration of source reduction.8 4.3.2 Demonstration of minimisation of dangerou

15、s substances or preparations .9 4.3.3 Demonstration of conformity with the limit for the presence of the named heavy metals9 5 List of performance criteria 9 Annex A (informative) Guidelines on the use of this standard for the assessment of adequate minimum weight/volume of packaging .10 A.1 Introdu

16、ction10 A.2 Assessment methodology 10 A.3 Performance criteria11 A.3.1 General11 A.3.2 Product protection.11 A.3.3 Packaging manufacturing process11 A.3.4 Packing/filling process11 A.3.5 Logistics (including transport, warehousing and handling).12 A.3.6 Product presentation and marketing.12 A.3.7 Us

17、er/consumer acceptance 12 A.3.8 Information .13 A.3.9 Safety 13 A.3.10 Legislation 13 A.3.11 Other issues .13 A.4 Example of a checklist layout.14 Annex B (informative) Examples of the weight/volume conformity assessment process by using the checklist .15 B.1 General15 B.2 Example based on packaging

18、 study carried out by UKCEED 15 B.2.1 General15 B.2.2 Product protection.15 B.2.3 Packaging manufacturing process15 B.2.4 Packing/filling process15 B.2.5 Logistics .15 B.2.6 Product presentation and marketing.16 B.2.7 User/consumer acceptance 16 B.2.8 Information .16 B.2.9 Safety 16 B.2.10 Legislati

19、on 16 B.2.11 Other issues .16 EN 13428:2004 (E) 3 B.3 Example based on a packaging study carried out by Fachvereinigung Behlterglasindustrie e.V .18 B.3.1 General .18 B.3.2 Product protection 18 B.3.3 Packaging manufacturing process18 B.3.4 Packing/filling process .19 B.3.5 Logistics.19 B.3.6 Produc

20、t presentation and marketing.19 B.3.7 User/consumer acceptance19 B.3.8 Information.19 B.3.9 Safety19 B.3.10 Legislation19 B.3.11 Other issues.19 Annex C (normative) Minimisation of Dangerous Substances or Preparations and Demonstration of Conformity .21 C.1 Objective.21 C.2 Determination of the subs

21、tances or preparations to be minimised 21 C.3 Conformity with the minimisation requirement22 Annex D (informative) Decision Tree - Minimisation of Dangerous Substances or Preparations and Demonstration of Conformity .23 Annex ZA (informative) Relationship between this European Standard and the essen

22、tial requirements of EU Directive 94/62/EC .24 Bibliography25 EN 13428:2004 (E) 4 Foreword This document (EN 13428:2004) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard

23、, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. This document supersedes EN 13428:2000. This document has been prepared under a mandate given to CEN by the European Com

24、mission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This standard forms one of a series of standards and reports prepared under Mandate M

25、200 rev.3 and the Second Standardisation Mandate M317 given to CEN by the European Commission and the European Free Trade Association to support the European Council and Parliament Directive on Packaging and Packaging Waste 94/62/EC. The procedure for applying this standard in conjunction with the o

26、ther mandated standards and reports is specified in EN 13427. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France

27、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13428:2004 (E) 5 Introduction The Directive on Packaging and Packaging Waste (94/62/EC) defines requ

28、irements for the manufacturing and composition of packaging. This document amplifies these requirements with respect to reduction of packaging at source and the minimisation of dangerous substances or preparations as they may arise from waste management operations. The European Standard EN 13427 pro

29、vides a framework within which this and four other standards may be used together to support a claim that a packaging is in compliance with the essential requirements for packaging to be placed on the market as required by the Directive. NOTE The Directive 94/62/EC is amended by European Parliament

30、and Council Directive 2004/12/EC of 11 February 2004. The purpose of packaging is the containment, protection, handling, delivery and presentation of products. A major role is prevention of product damage and/or product waste. Reduction of packaging at source is one of several options for reducing t

31、he amount of used packaging for final disposal. In order to save resources and minimise waste, the whole system in which the packaging takes part should be optimised. This document presents a framework for self-assessment to determine whether the requirements of this standard have been met. Its appr

32、oach is similar to that of systems standards such as the EN ISO 9000 series or an environmental management system such as EN ISO 14001. EN 13428:2004 (E) 6 1 Scope This document specifies a procedure for assessment of packaging to ensure that the weight and/or volume of its material content is at th

33、e minimum commensurate with the maintenance of : functionality throughout the supply and user chain ; safety and hygiene for both product and user/consumer ; acceptability of the packed product to the user/consumer. This document also specifies the methodology and procedure for determining the prese

34、nce of the four heavy metals named in article 11 of the packaging and packaging waste Directive 94/62/EC and for determining the presence and minimisation of any dangerous substances or preparations if they are present in packaging and are likely to be released into the environment as a result of wa

35、ste management operations. The procedures are referenced in CR 13695-1 and CEN/TR 13695-2. NOTE The substitution of one packaging material by another is not a basis for source reduction. This document cannot by itself provide presumption of conformity. The procedure for applying this document is con

36、tained in EN 13427. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 131

37、93, Packaging Packaging and the Environment Terminology. EN 13427, Packaging Requirements for the use of European Standards in the field of packaging and packaging waste. CR 13695-1:2000, Packaging Requirements for measuring and verifying the four heavy metals and other dangerous substances present

38、in packaging, and their release into the environment Part 1 : Requirements for measuring and verifying the four heavy metals present in packaging. CEN/TR 136952:2004, Packaging Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and the

39、ir release into the environment Part 2 : Requirements for measuring and verifying dangerous substances present in packaging and their release into the environment. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13193 and the following apply. 3.1 prev

40、ention by source reduction process for the achievement of a minimum adequate weight and/or volume, for identical requirements, of primary and/or secondary and/or tertiary packaging, when performance and user acceptability remain unchanged and/or adequate, thereby minimising the impact on the environ

41、ment 3.2 critical area for source reduction specific performance criterion which prevents further reduction of weight and/or volume of the packaging without endangering functional performance, safety and user/consumer acceptability EN 13428:2004 (E) 7 3.3 supplier entity responsible for placing pack

42、aging or packed product on the market EN 13427 3.4 substances chemical elements and their compounds in the natural state or obtained by any production process, including any additive necessary to preserve the stability of the product, and any impurity deriving from the production process used, but e

43、xcluding any solvent which may be separated without affecting the stability of the substance or changing its composition 67/548/EEC 3.5 preparations mixtures or solutions composed of two or more substances 67/548/EEC 3.6 safety data sheets documentation provided by any person established within the

44、community who is responsible for placing a dangerous substance or preparation on the market, whether the manufacturer, importer or distributor. Documentation to be provided to any recipient who is a professional user of the substance or preparation and to contain the information required of the dang

45、erous substance or preparation 91/155/EEC NOTE 1 Article 1 of Directive 2001/58/EC amending Directive 91/155/EEC and the implementation of Directives 67/548/EEC and 1999/45/EC requires that the person who is responsible for placing a substance or preparation classified as dangerous on the market sha

46、ll supply the recipient who is a professional user with a safety data sheet. NOTE 2 Article 3 of Directive 91/155/EEC on Safety Data Sheets defines the content of the 16 obligatory headings. Information on the composition of a preparation in dangerous substances is given in heading 2. Heading 12 (ec

47、otoxicology) requires the description of the most important characteristic likely to have an effect on the environment owing to the nature of the substance or preparation and likely methods of use. Information of the same kind shall be supplied for dangerous products arising from the degradation of

48、substances or preparations 4 Requirements 4.1 Application The application of this document to any particular packaging shall be as specified in EN 13427. 4.2 Packaging assessment 4.2.1 General The supplier shall be able to demonstrate by the determination of a critical area that the minimum adequate

49、 amount of weight and/or volume of the packaging have been reached taking into account all the “performance criteria“ included in Clause 5 (see 4.2.2). The supplier shall be able to demonstrate that substances or preparations classified as dangerous to the environment and assigned with the symbol N (see 4.2.3) present in the packaging components have been minimised in accordance with Annex C. Annex D provides a basis for this assessment. The supplier shall be abl