EN 13402-1-2001 en Size Designation of Clothes - Part 1 Terms Definitions and Body Measurement Procedure《服装尺寸的名称与符号 第1部分 术语 定义和人体测量过程 ISO 3635-1981修正》.pdf

《EN 13402-1-2001 en Size Designation of Clothes - Part 1 Terms Definitions and Body Measurement Procedure《服装尺寸的名称与符号 第1部分 术语 定义和人体测量过程 ISO 3635-1981修正》.pdf》由会员分享，可在线阅读，更多相关《EN 13402-1-2001 en Size Designation of Clothes - Part 1 Terms Definitions and Body Measurement Procedure《服装尺寸的名称与符号 第1部分 术语 定义和人体测量过程 ISO 3635-1981修正》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、STD-BSI BS EN 13402-1-ENGL 2001 1624669 0909437 O13 BRITISH STANDARD Size designation of clothes - Part I: Terms, definitions and body measurement procedure The European Standard EN 13402-1:2001 has the status of a British Standard ICs 01.040.61; 61.020 BS EN 13402-1 :2001 NO COPYING WITHOUT BSI PER

2、MISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW STDoBSI BS EN L3402-L-ENGL 2OOL = LbZ4bb9 0909438 T5T BS EN 13402-1:2001 Amd. No. Date National foreword Comments This British Standard is the official English language version of EN 13402-1:2001. It supersedes BS 5511:1977 which is withdrawn. The UK part

3、icipation in its preparation was entrusted to Technical Committee TCI/66, Apparel, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed

4、; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in t

5、his document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Us

6、ers of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having been prepared under the direction of the Sector Committee for Materials and ChemicaIs, was published und

7、er the authority of the Standards Committee and comes into effect on 15 May 2001 Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the document was last iss

8、ued. O BSI 05-2001 ISBN O 580 37278 2 STDmBSI BS EN 13402-1-ENGL 2001 1624669 0909439 97b EUROPEAN STANDARD EN 13402-1 NORME EUROPENNE EUROPkSCHE NORM March 2001 ICs 01.040.61; 61 .O20 English version Size designation of clothes - Part I: Terms, definitions and body measurement procedure (IS0 36351

9、981 modified) Dsignations des tailles de vtements - Partie 1: Termes, dfinitions et procds de mesurage du corps (IS0 36351981 modifie) Grenbezeichnung von Bekleidung - Teil 1: Begriffe und Verfahren fr die Messung am Krper (IS0 3635:1981, modifiziert) This European Standard was approved by CEN on 4

10、February 2001. CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

11、e obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Manageme

12、nt Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUR

13、OPEAN COh4MITEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FUR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13402-1:2001 E STDmB

14、SI BS EN 13402-1-ENGL 2001 1624bb9 0909440 608 Page 2 EN 13402-1 12001 Foreword This European Standard has been prepared by Technical Committee CENITC 248, Textiles and textile products, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard,

15、 either by publication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. It is one of a series of standards being prepared describing the size designation of clothes. Other standards in the

16、series have the following titles: prEN 13402-2, Size designation of clothes - Primary and secondary dimensions in garments prEN 13402-3, Standard size designation systems for clothing (Wi 00248243) It is related to IS0 36351981; prEN IS0 36351996 was submitted to the Unique Acceptance Procedure (UAP

17、) in CEN on 1996-10-24. Since the result of the UAP was negative, CENTTC 248 examined the reasons for negative votes and modified the IS0 Standard to suit the European needs. This European Standard is the result of this work. Additional dimensions for garment construction are standardized in IS0 855

18、9 see Annex A (informative). This standard includes a Bibliography. According to the CENICENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, G

19、reece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Q BSI 05-2001 STD-BSI BS EN 13402-1-ENGL 2OOL H Lb24bb9 0907443 544 H Page 3 EN 13402-1 2001 Introduction This European Standard is intended as a reference document to be con

20、sulted in conjunction with the European Standard for the size designation of clothes applicable to the garment under consideration. 1 Scope This European Standard defines body dimensions for garments, specifies a procedure for measuring the body and gives pictograms to be used on garment labels. 2 N

21、ormative references This European Standard incorporates, by dated or undated references, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments or revisions

22、of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publications referred to applies (including amendments). prEN 13402-2, Size designation of clothes - Primary and secondary dimensions i

23、n garments 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1 primary dimension body measurement, in centimetrec, that shall be used in designating the size of a garment (see prEN 13402-2, in preparation, at enquiry stage with number prEN 13764)

24、 3.2 secondary dimension body measurement, in centimetres, or, in the case of pantyhose, body mass (kg), that may additionally be used in designating the size of a garment (see prEN 13402-2, in preparation, at enquiry stage with number prEN 13764) O BSI 052001 STD-BSI BS EN 13402-1-ENGL 2001 W Lb24b

25、b9 0909442 480 Page 4 EN 13402-1 12001 3.3 standard pictogram pictorial symbol used to indicate the position on the body of the relevant dimensions o Q Standard pictogram 3.4 modified pictogram standard pictogram on which the position of the breasts is shown by two inverted arcs to indicate the posi

26、tion of the underbust girth dimension NOTE 1 The standard pictogram and the modified pictogram are shown below in their basic forms, .e. without the numerals used for labelling. For uniformity of presentation, girth measurements should be shown on the left hand side and length measurements on the ri

27、ght hand side of pictograms. NOTE 2 The minimum size of the pictogram is not specified but it should be large enough to convey immediate understanding and allow the use of readily legible numerals. NOTE 3 The recommended type for use on pictograms is UNIVERS%, as used in the European Standard for th

28、e relevant size designation. NOTE 4 The pictogram provides information only and does not give the technical information on how the measurement is to be made. The measuring position is provided in 3.5 to 3.17. Modified pictogram O BSI 052001 STD-BSI BS EN 13402-1-ENGL 2001 Lb24bb9 0709443 3L Page 5 E

29、N 13402-1 2001 Definit ion 3.5 head girth maximum horizontal girth of the head measured above the ears 3.6 neck girth girth of the neck measured with the tape-measure passed 2 cm below the Adams apple and at the level of the 7th cervical vertebra 3.7 chest girth maximum horizontal girth measured dur

30、ing normal breathing with the subject standing erect and the tape-measure passed over the shoulder blades (scapulae), under the armpits (axillae), and across the chest Pictogram 3.8 bust girth maximum horizontal girth measured during normal breathing with the subject standing erect and the tape-meas

31、ure passed horizontally, under the armpits (axillae), and across the bust prominence Measuring position I O BSI 05-2001 STD-BSI BS EN 33402-L-ENGL 2001 Lb24bbq 0709444 253 W Page 6 EN 13402-1 :2001 Definition Pictogram 3.9 underbust girth horizontal girth of the body measured just below the breasts

32、3.10 waist girth girth of the natural waistline between the top of the hip bones (iliac crests) and the lower ribs, measured with the subject breathing normally and standing erect with the abdomen relaxed 3.1 I hip girth horizontal girth measured round the buttocks at the level of maximum circumfere

33、nce 3.12 height (subjects other than infants) vertical distance between the crown of the head and the soles of the feet, measured with the subject standing erect without shoes and with the feet together Measuring position 0 BSI 052001 STDIBSI BS EN 13402-1-ENGL 2001 m 1624669 0909445 19T M Page 7 EN

34、 13402-1 12001 Definition Pictogram 3.1 3 height (infants, not yet able to stand upright) length of the body measured in a straight line from the crown of the head to the soles of the feet I 3.14 inside leg length distance between the crotch and the soles of the feet, measured in a straight vertical

35、 line with the subject erect, feet slightly apart, and the weight of the body equally distributed on both legs 3.1 5 arm length (shoulder to wrist) distance, measured using the tape-measure, from the armscye/ shoulder line intersection (acromion), over the elbow, to the far end of the prominent wris

36、t bone (ulna), with the subjects right fist clenched and placed on the hip, and with the arm bent at 90 L Measuring position 3.16 hand girth maximum girth measured over the knuckles (metacarpals) of the open right hand, fingers together and thumb excluded NOTE For hand length see IS0 4418. O BSI 05-

37、2001 Page 8 EN 13402-1 12001 3.1 7 foot length horizontal distance between perpendiculars in contact with the end of the most prominent toe and the most prominent part of the heel, measured with the subject standing barefoot and the weight of the body equally distributed on both feet NOTE Attention

38、is drawn to IS09407 for the fitting of boots or shoes. Foot length and width are measured in millimetres with the subject wearing hose appropriate to the type of boot or shoe. 4 Measurement of body dimensions 4.1 Apparatus 4.1 .I Measuring stand (anthropometer, somatometer), consisting essentially o

39、f a rule, graduated in centimetres,vertically mounted and with a movable arm (cursor). 4.1.2 Dimensionally stable tape-measure, of width approximately 15 mm and graduated in centimet res. 4.1.3 Balance suitable for measuring body mass. 4.2 Procedure If practicable, measure the body in the unclothed

40、state. If this is impracticable (for example, if measurements are made at the point of sale), ensure that the measurements are taken over as few clothes as possible and that these garments do not seriously affect the body shape or interfere with the taking of accurate measurements. When determining

41、bust girth, measure over a brassiere that shall not deform the breast in an unnatural way and shall not displace its volume (see also IS0 8559). Use the measuring stand (see 4.1 .I) to measure the height of ali persons other than infants not yet able to stand upright. Use the tape-measure (see 4.1.2

42、) to measure all other dimensions as well as the height of infants not yet able to stand upright. Apply moderate tension to the tape-measure (but ensure that the body is not constricted by the tape) and take each measurement “rounded up” to the next centimetre, except where mm are needed, e. g. foot

43、 and hand. Use the balance (see 4.1.3) to measure the body mass. Take measurements of all the primary dimensions specified in the European Standard for the size designation of the garment concerned. Other methods of measuring the body, such as biostereometry, photogrammetry scanning and other techno

44、logies, may be used, provided they are at least as accurate as the method prescribed. Q BSI 052001 STD-BSI BS EN 13402-L-ENGL 2001 Lb2Ybb7 0709447 Tb2 m Page 9 EN 13402-1 :2OOI Bibliography IS0 441 8, Size designation of clothes - Gloves IS0 8559, Garment construction and anthropometric suweys - Bod

45、y dimensions IS0 9407, Shoe sizes - Mondopoint system of sizing and marking O BSI 05-2001 - - - STD-BSI BS EN 13402-1-ENGL 2001 W Lb24669 0909448 9T9 BS EN 13402-1:2001 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for p

46、reparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or edi

47、tions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the i

48、nside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should

49、 be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. in response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI e