EN 12236-2002 en Ventilation for Buildings - Ductwork Hangers and Supports - Requirements for Strength《建筑物通风 管道悬架和支架 强度需求》.pdf

《EN 12236-2002 en Ventilation for Buildings - Ductwork Hangers and Supports - Requirements for Strength《建筑物通风 管道悬架和支架 强度需求》.pdf》由会员分享，可在线阅读，更多相关《EN 12236-2002 en Ventilation for Buildings - Ductwork Hangers and Supports - Requirements for Strength《建筑物通风 管道悬架和支架 强度需求》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Ventilation for buildings Ductwork hangers and supports Requirements strength for The European Standard EN 12236:2002 has the status of a British Standard ICs 91.140.30 BS EN 12236:2002 Wk present to the responsible European committee any enquiries on the interpretation, or proposal

2、s for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards which implement i

3、nternational or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to

4、include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, t

5、he EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 4 April 2002 ISBN O 580 39457 3 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12236 January 2002 ICs 91.140.30 English version Ventilation for

6、buildings - Ductwork hangers and supports - Requirements for strength Ventilation des btiments - Supports et appuis pour rseau de conduits - Prescriptions de rsistance Lftung von Gebuden -Aufhngungen und Auflager fr Luftleitungen - Anforderungen an die Festigkeit This European Standard was approved

7、by CEN on 29 December 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stan

8、dards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to t

9、he Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and U

10、nited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12236

11、:2002 E EN 12236:2002 (E) Contents Page Foreword 3 Scope 4 Normative references 5 Terms and definitions . 5 Function 5 Support attachment to building structure 5 Determination of load 6 Supports for ductwork 6 7.1 Attachment to structure . . 6 7.2 Support construction . 8 Connection between duct and

12、 support . 7 9 Spacing of duct supports . 7 2 EN 12236:2002 (E) Foreword This European Standard has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by

13、 publication of an identical text or by endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the latest by July 2002. The standard is one of a series of standards for ductwork used for ventilation and air conditioning of buildings for human occupancy. The

14、 position of this standard in the field of mechanical building services is shown in Figure 1. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Fi

15、nland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 12236:2002 (E) Mechanical building services I Control Systems L Ventilation and air units I Heating Systems 2 Air handling Installation I

16、 Sheet metal air ducts with circular cross section - Dimensions Circular sheet metal air ducts Requirements for strength and leakage - Sheet metal air ducts with rectangular cross section -Dimensions Measurement of duct surface area I I I I I Rectangular sheet metal air ducts - Requirements for stre

17、ngth and leakage Ductwork hangers and supports - Requirements for strength I Requirements for I I Flanges d uctwork components to facilitate I maintenance II I Il Determination of Ductwork made of mechanical energy insulation ductboards Figure 1 - Position of EN 12236 in the field of mechanical buil

18、ding services 1 Scope This standard specifies requirements for the construction and application of supports for sheet metal ductwork in ventilation and air conditioning systems. The standard applies to any shape of ductwork (rectangular, circular and oval), and components used in ventilation and air

19、 conditioning systems in buildings. 4 EN 12236:2002 (E) The standard also takes into account insulation loads, safety factors, imposed loads (cleaning and maintenance), vibration isolation, and corrosion resistance. The standard does not consider loading due to earthquakes. The standard does not dea

20、l with fire requirements and fire protection of ducts and support systems 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are

21、listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). C

22、R 12792 Ventilation for buildings - Symbols and terminology. EN 1505 EN 1506 ENV 12097 Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions. Ventilation for buildings - Sheet metal air ducts and fittings with circular cross section - Dimensions.

23、Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems. prEN 1507 Ventilation for buildings - Ductwork - Rectangular sheet metal air ducts - Requirements for testing Strength and leakage. prEN 12237 Ventilation for buildings - Ductwo

24、rk - Strength and leakage of circular sheet metal ducts. 3 Terms and definitions For the purposes of this European Standard the terms and definitions given in CR 12792 apply. 4 Function The principal function of the suppodhanger system is to ensure a secure connection to the building that will accep

25、t the load imposed by the air distribution system. The suppodhanger system shall therefore be designed to ensure a secure support for the ductwork system. Particular attention shall be given to the support of individual components included in ductwork systems. Ductwork components will generally be i

26、n accordance with EN 1505, EN 1506, ENV 12097, prEN 1507 and prEN 12237. The designer shall also take account of insulation loads, imposed loads (cleaning and maintenance), vibration isolation and corrosion resistance, together with necessary safety factors. 5 Support attachment to building structur

27、e The requirements in this standard are specified on the basis that the building has been designed to accept the load imposed by mechanical and air distribution services and systems. The selected method of attachment to the structure shall ensure the following: a) compatibility with the building mat

28、erial at the fixing point; b) a defined permissible load; 5 EN 12236:2002 (E) c) an anti-corrosion characteristic appropriate to the installation environment. 6 Determination of load Due to the wide variety of construction methods used in both manufacturing of sheet metal air ducts and similarly the

29、 variety of supporting methods in each particular building, it is not practical to offer a fixed method of calculating loads. Deflection of the duct shall not significantly affect the airflow conditions and consideration shall be given to the loading conditions including the following: a) the weight

30、 tables for various sizes of duct provided by the duct manufacturer; b) the weight of the insulation material, if any, applied to the ductwork, including the weight of any surface cladding; c) the weight of any components included in the ductwork and not independently suspended, e.g. acoustic treatm

31、ent, silencers, dampers etc.; d) the weight of the hanger structure; e) the additional weight of a person or persons who may gain access to the ductwork for purpose of cleaning or maintenance; f) the possibility that external loads, e.g. ladders, will be imposed for which a separate loading calculat

32、ion is required; g) the operating temperature of the duct system, where applicable. Taking account of the factors a) to g), the availability of suitable fixing points shall be established and a separate calculation shall be made, where necessary, to establish the load on each fixing. 7 Supports for

33、ductwork 7.1 Attachment to structure The fixing selected to provide the attachment to the structure shall have a safety factor of at least three in respect to the calculated load imposed by the support and duct sections. 7.2 Support construction For ducts the support can comprise vertical and/or hor

34、izontal components. The vertical component(s) shall be designed with a safety factor of at least 13 related to the yield strength of the material of the support in respect of the load imposed by the duct to be supported, including additional loads due to, for example, insulation, cladding or future

35、access requirements. The horizontal components shall be capable of supporting the total calculated load imposed by the duct and any other loads (e.g. man loading) on the duct. Components shall be designed to ensure that the deflection between the connections to the vertical components and any part o

36、f the horizontal component shall not exceed 0,4 % of the distance between the vertical fixings. The connection between the vertical and horizontal components(s) shall also be designed with a safety factor of 13 in relation to the yield strength of the material of the support, and shall not rely on f

37、riction devices. Where applicable, brackets shall be designed to support the load due to the ductwork and insulation and any benefit derived from horizontal duct connections or supports shall be excluded from the calculations. 6 EN 12236:2002 (E) 8 Connection between duct and support It is usually n

38、ot required to fasten support members to ducts where ducts are installed horizontally, and are supported on a support bearer. Where the duct is supported by brackets that are fixed directly to the duct wall, or a duct joint, the fixings used the design of the fixings used shall include the same safe

39、ty factors as the support structure. 9 Spacing of duct supports Spacing requirements shall be such as to take account of the strength of the supports, the strength of the ductwork assembly and the need to ensure that deflection of the ductwork shall not affect the leakage, aerodynamic properties and

40、 the physical integrity of the ductwork system. Where items of equipment, e.g. fans, heaters, mixing boxes, etc., are likely to be removed or replaced, they shall be supported independently of the ductwork. All items that are subjected to the effects of mechanical pressure related vibrations or ther

41、mal movement shall be considered individually in the support system design. 7 BS EN 12236:2002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It

42、 is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grat

43、eful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual up

44、dating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email:

45、 orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provid

46、es a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +

47、44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 899

48、6 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publ

49、ications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details such as symbols, and size, t