ECMA 346-2003 Private Integrated Services Network (PISN) Specification Functional Model and Information Flows Message Centre Monitoring and Mailbox Identification Supplementary Ser.pdf

《ECMA 346-2003 Private Integrated Services Network (PISN) Specification Functional Model and Information Flows Message Centre Monitoring and Mailbox Identification Supplementary Ser.pdf》由会员分享，可在线阅读，更多相关《ECMA 346-2003 Private Integrated Services Network (PISN) Specification Functional Model and Information Flows Message Centre Monitoring and Mailbox Identification Supplementary Ser.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、 Standard ECMA-346 International June 2003 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Message Centre Monitoring and Mailbox Identification Supplementary Services Phone: +41 22 849.60.00 - Fax: +

2、41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch . Standard ECMA-346 International June 2003 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Message Centre Monitoring and Mailbox

3、Identification Supplementary Services (MCM-SD / MID-SD) Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch IW Ecma-346.doc 10-07-03 14,37 . Brief History This Standard is one of a series of ECMA Standards defining services and signalling protocols ap

4、plicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under ETSI work item DTS/ECMA-00229. This particular Sta

5、ndard specifies the Message Centre Monitoring and Mailbox Identification supplementary service. SS-MCM is based on SS-MWI and includes its entire functionality. The interoperability with SS-MWI is guaranteed. Compared to SS-MWI, SS-MCM offers an enhanced functionality for monitoring status changes o

6、f messages stored in the Served Users Mailbox as follows: individual activation and deactivation for the monitoring of messages of different Message Type(s) within the Mailbox as well as interrogation of the actual SS-MCM configuration; retrieval of information about all messages (i.e. new and retri

7、eved messages) in the mailbox independent of the Message Status; request of detailed updated information about messages stored in the mailbox at every time. This Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in t

8、he work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. This ECMA Standard has been adopted by the General Assembly of June 2003. - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative)

9、 1 4 Definitions 2 4.1 External definitions 2 4.2 Other definitions 2 4.2.1 Address Header 2 4.2.2 Complete Information 2 4.2.3 Compressed Information 2 4.2.4 Deleted Messages 2 4.2.5 Mailbox 2 4.2.6 Message Centre (MC) 2 4.2.7 Message Status 2 4.2.8 Message Type 2 4.2.9 Message Waiting Signal 3 4.2

10、.10 New Message 3 4.2.11 Originator 3 4.2.12 Originator address 3 4.2.13 Retrieved Message 3 4.2.14 Served User 3 5 List of acronyms 3 6 SS-MCM stage 1 specification 3 6.1 Description 3 6.1.1 General description 3 6.1.2 Qualifications on applicability to telecommunication services 4 6.2 Procedures 4

11、 6.2.1 Provision / withdrawal 4 6.2.2 Normal procedures 4 6.2.3 Exceptional procedures 7 6.3 Interactions with other Supplementary Services / Additional Network Features 8 6.3.1 Calling Line Identification Presentation (SS-CLIP) 8 6.3.2 Connected Line Identification Presentation (SS-COLP) 8 6.3.3 Ca

12、lling/Connected Line Identification Restriction (SS-CLIR) 8 6.3.4 Calling Name Identification Presentation (SS-CNIP) 8 6.3.5 Calling/Connected Name Identification Restriction (SS-CNIR) 8 6.3.6 Connected Name Identification Presentation (SS-CONP) 8 6.3.7 Call Forwarding Unconditional (SS-CFU) 8 6.3.8

13、 Call Forwarding Busy (SS-CFB) 8 - ii - 6.3.9 Call Forwarding No Reply (SS-CFNR) 8 6.3.10 Path Replacement (ANF-PR) 8 6.3.11 Call Transfer (SS-CT) 8 6.3.12 Call Deflection (SS-CD) 8 6.3.13 Completion of Calls to Busy Subscribers (SS-CCBS) 8 6.3.14 Completion of Calls on No Reply (SS-CCNR) 8 6.3.15 C

14、all Offer (SS-CO) 8 6.3.16 Do Not Disturb (SS-DND) 8 6.3.17 Do Not Disturb Override (SS-DNDO) 8 6.3.18 Call Intrusion (SS-CI) 8 6.3.19 Advice of Charge (SS-AOC) 9 6.3.20 Recall (SS-RE) 9 6.3.21 Call Interception (SS-CINT) 9 6.3.22 Transit Counter (ANF-TC) 9 6.3.23 Route Restriction Class (ANF-RRC) 9

15、 6.3.24 Message Waiting Indication (SS-MWI) 9 6.3.25 Wireless Terminal Location Registration (SS-WTLR) 9 6.3.26 Wireless Terminal Incoming Call (SS-WTMI) 9 6.3.27 Wireless Terminal Outgoing Call (SS-WTMO) 9 6.3.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) 9 6.3.29 Wireless Terminal Au

16、thentication of the PISN (SS-WTAN) 9 6.3.30 Common Information (SS-CMN) 9 6.3.31 Call Priority Interruption (Protection) (SS-CPI(P) 9 6.3.32 Private User Mobility Incoming Call (ANF-PUMI) 9 6.3.33 Private User Mobility Outgoing Call (ANF-PUMO) 9 6.3.34 Private User Mobility Registration (SS-PUMR) 9

17、6.3.35 Single Step Call Transfer (SS-SSCT) 9 6.3.36 Simple Dialog (SS-SD) 9 6.3.37 Call Identification and Call Linkage (ANF-CIDL) 9 6.3.38 Short Message Service (SS-SMS) 10 6.3.39 Make Call Request (SS-MCR) 10 6.3.40 Mailbox Identification (SS-MID) 10 6.4 Interworking considerations 10 6.5 Overall

18、SDL 10 7 SS-MID stage 1 specification 13 7.1 Description 13 7.1.1 General description 13 7.1.2 Qualifications on applicability to telecommunication services 13 7.2 Procedures 13 7.2.1 Provision / withdrawal 13 7.2.2 Normal procedures 13 7.2.3 Exceptional procedures 13 7.3 Interactions with other Sup

19、plementary Services / Additional Network Features 14 7.3.1 Calling Line Identification Presentation (SS-CLIP) 14 7.3.2 Connected Line Identification Presentation (SS-COLP) 14 - iii - 7.3.3 Calling/Connected Line Identification Restriction (SS-CLIR) 14 7.3.4 Calling Name Identification Presentation (

20、SS-CNIP) 14 7.3.5 Calling/Connected Name Identification Restriction (SS-CNIR) 14 7.3.6 Connected Name Identification Presentation (SS-CONP) 14 7.3.7 Call Forwarding Unconditional (SS-CFU) 14 7.3.8 Call Forwarding Busy (SS-CFB) 14 7.3.9 Call Forwarding No Reply (SS-CFNR) 14 7.3.10 Path Replacement (A

21、NF-PR) 14 7.3.11 Call Transfer (SS-CT) 14 7.3.12 Call Deflection (SS-CD) 14 7.3.13 Completion of Calls to Busy Subscribers (SS-CCBS) 14 7.3.14 Completion of Calls on No Reply (SS-CCNR) 14 7.3.15 Call Offer (SS-CO) 14 7.3.16 Do Not Disturb (SS-DND) 14 7.3.17 Do Not Disturb Override (SS-DNDO) 14 7.3.1

22、8 Call Intrusion (SS-CI) 15 7.3.19 Advice of Charge (SS-AOC) 15 7.3.20 Recall (SS-RE) 15 7.3.21 Call Interception (SS-CINT) 15 7.3.22 Transit Counter (ANF-TC) 15 7.3.23 Route Restriction Class (ANF-RRC) 15 7.3.24 Message Waiting Indication (SS-MWI) 15 7.3.25 Wireless Terminal Location Registration (

23、SS-WTLR) 15 7.3.26 Wireless Terminal Incoming Call (SS-WTMI) 15 7.3.27 Wireless Terminal Outgoing Call (SS-WTMO) 15 7.3.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) 15 7.3.29 Wireless Terminal Authentication of the PISN (SS-WTAN) 15 7.3.30 Common Information (SS-CMN) 15 7.3.31 Call Pr

24、iority Interruption (Protection) (SS-CPI(P) 15 7.3.32 Private User Mobility Incoming Call (ANF-PUMI) 15 7.3.33 Private User Mobility Outgoing Call (ANF-PUMO) 15 7.3.34 Private User Mobility Registration (SS-PUMR) 15 7.3.35 Single Step Call Transfer (SS-SSCT) 15 7.3.36 Simple Dialog (SS-SD) 15 7.3.37

25、 Call Identification and Call Linkage (ANF-CIDL) 15 7.3.38 Short Message Service (SS-SMS) 15 7.3.39 Make Call Request (SS-MCR) 16 7.3.40 Message Centre Monitoring (SS-MCM) 16 7.4 Interworking considerations 16 7.5 Overall SDL 16 8 SS-MCM stage 2 specification 18 8.1 Functional model 18 8.1.1 Functio

26、nal model description 18 8.1.2 Description of Functional Entities 18 - iv - 8.2 Information flows 19 8.2.1 Definition of information flows 19 8.2.3 Information flow sequences 25 8.3 Functional Entity actions 28 8.3.1 Functional Entity actions of FE1 28 8.3.2 Functional Entity actions of FE2 29 8.3.3

27、 Functional Entity actions of FE3 29 8.4 Functional Entity behaviour 30 8.4.1 Behaviour of FE1 30 8.4.2 Behaviour of FE2 37 8.4.3 Behaviour of FE3 44 8.5 Allocation of Functional Entities to physical equipment 50 8.6 Interworking considerations 50 9 SS-MID stage 2 specification 51 9.1 Functional mod

28、el 51 9.1.1 Functional model description 51 9.1.2 Description of Functional Entities 51 9.2 Information flows 51 9.2.1 Definition of information flows 51 9.2.2 Information flow sequences 53 9.3 Functional Entity actions 54 9.3.1 Functional Entity actions of FE1 54 9.3.2 Functional Entity actions of

29、FE2 54 9.3.3 Functional Entity actions of FE3 54 9.4 Functional Entity behaviour 55 9.4.1 Behaviour of FE1 55 9.4.2 Behaviour of FE2 57 9.4.3 Behaviour of FE3 59 9.5 Allocation of Functional Entities to physical equipment 60 9.6 Interworking considerations 60 1 Scope This Standard specifies suppleme

30、ntary service Message Centre Monitoring/Mailbox Identification (SS-MCM/MID), which is related, but not limited, to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ECMA-142. The supplementary service MCM enables a Served User to get in

31、formed by a Message Centre about the status and status changes of messages stored in that Served Users Mailbox. The supplementary service MID enables a Message Centre to identify a specific mailbox of a Served User in case that the Served User has more than one Mailbox within the Message Centre. In

32、addition SS-MID enables a Served User to authenticate himself/herself at a specific Mailbox located within the Message Centre. Service specifications are produced in three stages, according to the method described in ETS 300 387. This Standard contains the stage 1 and stage 2 specifications of SS-MC

33、M/MID. The stage 1 specification (clause 6 and 7) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (clause 8 and 9) specifies the functional entities involved in the supplementary service and the information flows between them. 2 Conformance In order to confor

34、m to this Standard, a stage 3 standard shall specify signalling protocols and equipment behaviour that are capable of being used in a PISN which supports the supplementary service specified in this Standard. This means that, to claim conformance, a stage 3 standard is required to be adequate for the

35、 support of those aspects of clause 6 and 7 (stage 1) and clause 8 and 9 (stage 2) which are relevant to the interface or equipment to which the stage 3 standard applies. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute provisions

36、of this Standard. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC Int

37、ernational Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-142 Private Integrated

38、 Services Network (PISN) Circuit-mode 64 kbit/s Bearer Services Service Description, Functional Capabilities and Information Flows (International Standard ISO/IEC 11574) ECMA-241 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Message Waiting Indicati

39、on Supplementary Service (International Standard ISO/IEC 15505) ETS 300 387 Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services (1994) ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993) ITU-T Rec. I.210 Principles of telecommunication services

40、 supported by an ISDN and the means to describe them (1993) ITU-T Rec. Z.100 Specification and Description Language (1999) - 2 - 4 Definitions For the purposes of this Standard, the following definitions apply: 4.1 External definitions This Standard uses the following terms defined in other document

41、s: Private Integrated services Network eXchange (PINX) (ECMA-133) Private Integrated Services Network (PISN) (ECMA-133) Service (ITU-T Rec. I.112) Signalling (ITU-T Rec. I.112) Supplementary Service (ITU-T Rec. I.210) Telecommunication Service (ECMA-142) User (ECMA-142) 4.2 Other definitions 4.2.1 A

42、ddress Header The Address Header includes Originator address information and, optionally, the receiving time stamp and the priority of one specific message. 4.2.2 Complete Information A complete list of Address Headers of either all New or all Retrieved Messages of one specific Message Type in a Mai

43、lbox. 4.2.3 Compressed Information Includes the number of either all New or all Retrieved Messages of one specific Message Type. Optionally, in the compressed information the Originator address, the priority level and the time stamp of the highest priority message can be included. If there is more t

44、han one message of the highest priority the optional information shall be related to the latest received highest priority message. 4.2.4 Deleted Messages A message of any Message Type which was previously stored in the Mailbox but which is not available anymore due to deletion by the Served User. 4.

45、2.5 Mailbox A logical entity within a Message Centre which stores all messages (New Messages and Retrieved Messages) of one or more Message Types for one specific Served User who is registered at the Message Centre. 4.2.6 Message Centre (MC) The entity within the network which administrates Mailboxe

46、s for Served Users. The MC provides the Served User with information about each incoming New Message in the Served Users Mailbox and about Message Status changes (e.g. due to retrieval or deletion) in the Served Users Mailbox by means of Complete or Compressed Information for New and Retrieved Messa

47、ges. This information is provided by update procedures. 4.2.7 Message Status Describes whether a stored message at the Served Users Mailbox is a New Message or a Retrieved Message. 4.2.8 Message Type The type of a message stored at the MC. A Message Type indicates either the telecommunication servic

48、e (e.g. speech, 3.1kHz audio, etc.) that is needed to retrieve a specific message via a PISN or the general type of a message that might not be directly retrieved by means of a PISN (e.g. email or video). - 3 - 4.2.9 Message Waiting Signal Any type of signal presented to a Served Users terminal that

49、 is useful to draw a Served Users attention to the arrival of a New Message in the Served Users Mailbox. NOTE The indication may be a lamp, special tone, display string etc. The technical realisation of the Message Waiting Signal is outside the scope of this Standard. 4.2.10 New Message A message of any Message Type, which is stored in a Mailbox. The Served User has not yet retrieved the message. 4.2.11 Originator The user who has left a message at the Served Users Mailbox. 4.2.12 Originator address Address information (i.e. Party Numbe