DOD A-A-53437-1988 BOTTLE AND TUMBLER SET《瓶和大玻璃杯装置》.pdf

《DOD A-A-53437-1988 BOTTLE AND TUMBLER SET《瓶和大玻璃杯装置》.pdf》由会员分享，可在线阅读，更多相关《DOD A-A-53437-1988 BOTTLE AND TUMBLER SET《瓶和大玻璃杯装置》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-5 34 37 29 April 1988 COMMERCIAL ITEM DESCRIPTION BOTTLE AND TUMBLER SET The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Federal Specification L-B-550B which is canceled. This Commercial Item Description covers a disposable bott

2、le and tumbler set suitable for hospital patient use. Salient characteristics: The bottle and tumbler set shall consist of a bottle with a minimum capacity of 32 ounces and a tumbler with a minimum capacity of 5-1/2 ounces. The set shall be disposable. The color shall be blue. The bottle and tumbler

3、 shall each be of one piece construction conforming to the shape and dimensions of Figure 1. The tumbler shall have a smooth, rounded drinking edge and shall a fit the bottle snugly. Molding compound used for manufacturing the bottle and tumbler set shall be virgin high density polyethylene or polyp

4、r.opylene suitable for conventional molding techniques. However, any excess plastic arising from normal blow moding may be reground and blended with virgin material but shall not.exceed 30 percent of the blend. The bottle and tumbler shall both sit evenly on a flat surface without rock or wobble. Th

5、e bottle and tumbler shall both be free from objectionable odor, cracks, holes, or thin areas. The edges shall be smooth or rounded to preclude injury to patients. The set components shall be free of grease, oil, dirt, chips, or other foreign materials. AMSC N/A FSC 7360 DISTRIBUTION STATEMENT A. Ap

6、proved for public release; distribution is unlimited. . THIS DOCUMENT ONTAINS b PAGES. f Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53437 73 7749774 0017778 7 M A-A43437 1 FIGZJRE 1. Bottle and tumbler set. 2 , 3/ -I = procedu;es) and testin

7、g (determination by technical means of physical and chemical properties) of the item. Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Sampling for examina

8、tion. Sampling for examination shall be conducted in accordance with MIL-STD-105, with an AQL of 1.0 (percent defective) and an inspection level of II. The unit of product for examination purposes shall be one bottle and tumbler set as specified in this description. 3 Provided by IHSNot for ResaleNo

9、 reproduction or networking permitted without license from IHS-,-,-A-A-53437 73 W 9999974 O017800 L W A-A- 5 3 4 3 7 Defects. Bottle or tumbler does not meet minimum capacity requirements. Bottle or tumbler not one piece construction. Tumbler does not fit the bottle snugly. Tumbler does not have smo

10、oth, rounded drinking edge. Set not made of high density polyethylene or polypropylene. Set components not free of grease, oil, dirt, chips, or other foreign materials. Set components not free of cracks or holes. Bottle or tumbler does not sit on flat surface without rock or wobble. Bottle or tumble

11、r not free from objectional odor or thin areas. Sampling for tests. Sampling for tests (dimensional) shall be conducted in accordance with MIL-STD-105, with an AQL of 2.5 (percent defective) and inspection level of S-l. The unit of product for test purposes shall be one bottle and tumbler set. the p

12、roduct offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise p

13、rovided or under the provisions of the contract. Contractor certification. The contractor shall certify that The 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-0 Regulatory requirements. A-A-5 34 37 Federal Food, Drug and Cosmetic Act. If the prod

14、uct covered by ay the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated ther

15、eunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encouraged to use

16、 recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regw2ation Subpart 23.4 to the maximum extent practical. Preservation, packaging, packing, labling, and marking. Unless otherwise specified, preservation, packaging, and packing shall be t

17、o a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulat

18、ions. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. NOTE: The following National Stock Number is covered by this document: 7360-00-935-2837 Ordering data. Intermediate/exterior package quantities, labeling, and marking must

19、be specified in the contract and/or order. MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD - MB Army - MD Navy - MS Air Force - 03 Agent: DLA-DM Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53Li37 73 797777Y 003780i 5 = A-A- li 3 4 3 7 CIVIL AGENCY COORDINATING ACTIVITIES: VA-oss PHS FDA-MPQAS PGC 57481 Project No: 6530-0159 Location: CID/BOTTLE/H13-25 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-