DLA MS27631 REV B-2009 ADAPTER ASSEMBLY FLARELESS 90 DEGREES ELBOW TUBE TO HOSE-WITH SWIVEL NUT.pdf

《DLA MS27631 REV B-2009 ADAPTER ASSEMBLY FLARELESS 90 DEGREES ELBOW TUBE TO HOSE-WITH SWIVEL NUT.pdf》由会员分享，可在线阅读，更多相关《DLA MS27631 REV B-2009 ADAPTER ASSEMBLY FLARELESS 90 DEGREES ELBOW TUBE TO HOSE-WITH SWIVEL NUT.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 MS27631B 22 October 2009 SUPERSEDING MS27631A 29 September 2000 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARELESS, 90 ELBOW, TUBE TO HOSE-WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the prod

2、uct described herein shall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Adapter assembly, flareless, 90oelbow. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27631B 2 PIN Elbow sub assembly Sleeve S

3、ocket A max inch (cm) MS27631-4C MS27634-4C MS27623-4C MS27622-4C 1.78 (4.52) MS27631-6C MS27634-6C MS27623-6C MS27622-6C 1.91 (4.85) MS27631-8C MS27634-8C MS27623-8C MS27622-8C 2.28 (5.79) MS27631-10C MS27634-10C MS27623-10C MS27622-10C 2.52 (6.40) NOTES: 1. Dimensions are in inches. 2. Metric equi

4、valents are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. FIGURE 1. Adapter assembly, flareless, 90oelbow - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-

5、83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330. Sizes -4 thru -8 shall have a forged design. Size -10 shall have a bent t

6、ube design. Material: Material shall be corrosion resistant steel (CRES), class 304 in accordance with SAE-AMS5639, 304L in accordance with SAE-AMS5647, 316 in accordance with SAE-AMS5648, or 321 in accordance with SAE-AMS5645, or condition A (accepted classes only), in accordance with ASTM A276. Fi

7、nish: Finish shall be passivated in accordance with MIL-DTL-83296. PIN example: MS27631 -4 C PIN example: MS27631-4C indicates a 90 adapter assembly 1/4 inch, CRES. Specification sheet number Dash size (see figure 1) Material (C for CRES) MS prefix Provided by IHSNot for ResaleNo reproduction or net

8、working permitted without license from IHS-,-,-MS27631B 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83296, this document references the following: MIL-DTL-83298 MIL-

9、DTL-32330 ASME Y14.5M ASTM A276 SAE-AS33514 SAE-AMS5639 SAE-AMS5645 SAE-AMS5647 SAE-AMS5648 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-061) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed abo

10、ve were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-