DLA A-A-55222-1993 BELT MAN-S COAT《男式外套带》.pdf

《DLA A-A-55222-1993 BELT MAN-S COAT《男式外套带》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55222-1993 BELT MAN-S COAT《男式外套带》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-55222 9999974 0345388 560 I INCH-POUND I A-A-55 2 2 2 06 July 1993 COMMERCIAL ITEM DESCRIPTION BELT, MANS COAT The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-B-17693. Abstract. This Commercial Item Description covers the requir

2、ements for the polyester/wool belt that is intended for wear on coats by male personnel of the US Marine Corps. Salient Characteristics. The belt shall be polyester/wool gabardine, Green Shade 2212, having one end pointed on a 45- degree angle and the other end square to button over a removable buck

3、le with a sliding keeper of the basic material. The belt shall have a rayon belt fastener to button on the underside for securing the belt to the coat. The buttonhole for the belt fastener shall be straight type, made to fit a 22-line sewing hole button. The purling of the buttonhole shall be on the

4、 outside of the fastener and the ends of the buttonhole shall be securely tacked. The silk sewing thread shall be used in seaming the belt, closing the ends of the belt, and bartacking the fastener to the belt. The belt shall be interlined with buckram and lined with basic material. The belt shall h

5、ave a snap fastener; the socket shall be on the underside, 3-1/2 to 3-3/4 inches from the folded edge (reference figure 1 for finished dimensions). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to

6、: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8405 DISTRIBUTION ST

7、ATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55222 9997774 Ol145LB 4T7 A-A-55 2 2 2 Mat er ia 1 s Basic material. The basic material for the belt shall be a 2/2 right hand twil

8、l, consisting of 2 ply warp and filling yarn spun from combed top of fleeced or pulled wool, with a minimum grade of 64s U.S. Standard, and semi-dull polyester top or cut tow with a minimum average fiber length of 3 inches, and of a suitable denier to blend with the wool. blend of not less than 40%

9、wool, with the remaining percentage polyester, and shall match shade Green 2212 by dyeing the wool and polyester fibers separately, then blending. The wool shall be top dyed, and the polyester fibers shall be stock, top or tow dyed. Mothproofing shall be applied in stock or top dyeing, and may be ob

10、tained under the trade name of Mitin FF High Concentrate, from Ciba-Geigy Corp., Dyestuffs and Chemicals Division, Swing Road, P.O. Box 18300, Greensboro, NC 27409, or under the name of Intracide M from Crompton and Knowles Corp., Street, Charlotte, NC 28233. The finished fabric shall be sheared, pr

11、essed and decated, and shall conform to the requirements specified in Table I when tested as specified. The yarn shall be a TABLE I. - BASIC MATERIAL REQUIREMENTS Characteristics Test methods Requirements (Minimum) Fiber identification Weight Yarns per inch - i/ As stated above ASTM-D 3776-85 6.80 o

12、z/sq yd Option C ASTM-D 3775-85 108 ends/inch 58 picks/inch Breaking strength ASTM-D 5034-90 140 lbs warp 72 lbs filling Dimensional stability AATCC 99-1988 -3.0% Max. warp Percent by weight of pure compound on the wool fiber content after five cycles of dry cleaning. Use procedure for specimens con

13、taining 100% wool. The percent of mothproofing agent content of a sample unit shall be reported as the average of the values obtained for the specimens tested and shall be reported to the nearest 0.1%. The stack 0 opening of the drier. - 4/ AATCC Chromatic Transference Scale Belt interlininq. Materi

14、al for interlining the belts shall be cloth, buckram, cotton, natural color, conforming to type I of A-A-50186. Belt fastener material. The material for the belt fastener shall be a 2/1 right hand twill of multifilament rayon, matching Green, shade 2208. The cloth shall be a natural finish, with no

15、resins, oils, starches or gums, and shall conform to the requirements and test methods specified in Table II. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A - A-55 2 2 2 D 9999974 0145LL 055 = A-A-55 2 2 2 TABLE II. - BELT FASTENER MATERIAL REQU

16、IREMENTS P Characteristics Test methods Requirements Fiber i/ As stated above (Minimum) identification Weight ASTM-D 3776-85 3.70 oz/sq yd Option C Yarns per inch ASTM-D 3775-85 121 ends/inch 67 picks/inch Breaking strength ASTM-D 5034-90 100 lbs warp (dry) 50 lbs filling Breaking strength ASTM-D 50

17、34-90 40 lbs warp (wet) - 2/ 20 lbs filling Dimensional stability +3.5% Max. warp any spot or stain (outside); thread ends not removed; label missing, incorrect, or illegible; measurement of item not as specified; bar code omitted or not readable by scanner, Human-Readable Interpretation (HRI) omitt

18、ed or illegible; bar-coded type not as specified, code density not as specified. Dimensional Examination. The finished belts shall conform to the dimensions specified. Any dimension that is not within the established tolerance shall be classified as a defect. The sample unit shall be one belt. 7 Pro

19、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55222 9999974 0145195 “TO W A-A-55 2 2 2 Packaains Examination. The fully packaged shipping containers shall be examined in accordance with defects listed below. The sample size shall be five shipping

20、containers fully packaged. The lot shall be unacceptable if one or more defects are found. EXAMINE DEFECT Marking Omitted; incorrect; illegible; (exterior and interior) of improper size, location, or method of application Materials Workmanship Content Palletization Any component missing, damaged, or

21、 not as specified Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling is more or less than required Number of items in container NSN shown on one or more items not as specified on shipping container Length, wi

22、dth, or height exceeds specified maximum requirements Pallet type not as specified Load not bonded as specified Preservation, Packinq, and Markinq. The preservation, packing, and marking shall be as specified in the contract or order. 8 Provided by IHSNot for ResaleNo reproduction or networking perm

23、itted without license from IHS-,-,-A-A-55222 = 9799974 014517b 637 A-A-5 5 2 2 2 Source of Government Documents. Copies of Military and Federal documents are available from: O Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Sources of Nonaovernment Docume

24、nts. ANSI/ASQC 21.4 - Sampling Procedures and Tables For Inspection By Attributes (Applications for copies should be addressed to American National Standards Institute, 1430 Broadway, New York, NY 10018- 3308. ) AATCC 8 - Colorfastness to Crocking: AATCC Crocheter Method AATCC 16 - Colorfastness to

25、Light AATCC 15 - Colorfastness to Perspiration AATCC 99 - Dimensional stability AATCC 132 - Colorfastness to Dry-cleaning (Applications for copies should be addressed to American 0 Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Triangle Park, NC 27709-2215) ASTM-D 3511 - Pill

26、ing ASTM-D 3776 - Weight ASTM-D 3775 - Yarns per inch ASTM-D 5034 - Breaking strength ASTM-D 5104 - Shrinkage (Applications for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) Custodian: Navy - MC Civil Agency Coordinating Activity

27、 : GSA - FSS Preparing Activity: DLA - CT Project No. 8405-0216 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55222 rn 9999974 oll45377 573 rn A-A-5522 2 32-LINE 4-HOLE SCWING BUTTON OVE RE DG F STITCHING IN TER LI N ING SECTION A-A a BELT DETAIL FIGURE 1. - BELT, COAT, MANS; POLYESTER/WOOL, GREEN 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-