DIN EN ISO 15065-2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065 2005) German version EN ISO 15065 2005《头部外形合乎ISO 7721标.pdf

《DIN EN ISO 15065-2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065 2005) German version EN ISO 15065 2005《头部外形合乎ISO 7721标.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 15065-2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065 2005) German version EN ISO 15065 2005《头部外形合乎ISO 7721标.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 21.060.10Countersinks for countersunk head screws with head configurationin accordance with ISO 7721(ISO 15065:2005)English version of DIN EN ISO 15065Senkungen fr Senkschrauben mit Kopfform nach ISO 7721 (ISO 15065:2005)A comma is used as the decimal marker.National forewordThis standard has be

2、en published in accordance with a decision taken by CEN/TC 185 to adopt, withoutalteration, International Standard ISO 15065 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss MechanischeVerbindungselemente (Fasteners Standards Committee), Technica

3、l Committee Fachgrundnormen.DIN EN 20273 and DIN EN 27721 are the standards corresponding to International Standards ISO 273 andISO 7721, respectively, referred to in clause 2 of the EN.AmendmentsDIN 66, April 1990 edition, has been superseded by the specifications of EN ISO 15065, which is identica

4、lto ISO 15065.Previous editionDIN 66: 1990-04.National Annex NAStandards referred to(and not included in Normative references)DIN EN 20273 Fasteners Clearance holes for bolts and screwsDIN EN 27721 Countersunk head screws Head configuration and gaugingDEUTSCHE NORM May 2005DIN EN ISO 15065 No part o

5、f this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 7www.din.dewww.beuth.de9643524Continued overleaf.Document co

6、mprises 7 pages.08.05G4G15G70G41G30G5Supersedes DIN 66,April 1990 edition.English versionICS 21.060.10Countersinks for countersunk head screws with headconfiguration in accordance with ISO 7721(ISO 15065:2005) 2005. CEN All rights of exploitation in any form and by any meansreserved worldwide for CE

7、N national members.Ref. No. EN ISO 15065:2005 ESenkungen fr Senkschrauben mitKopfform nach ISO 7721(ISO 15065:2005)This European Standard was approved by CEN on 2005-02-03.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European

8、 Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French,

9、German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, De

10、nmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN ISO 15065February 2005Management Centre: 36, rue de Stassart, B-

11、1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungFraisures pour vis tte fraise avecune configuration de la tte conforme lISO 7721 (ISO 15065:2005)Page 2EN ISO 15065:2005ForewordInternational StandardISO 15065:2005 Countersinks for counter

12、sunk head screws with head configuration in accordance withISO 7721,which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners andaccessories, the Secretariat of whic

13、h is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by August 2005 at the latest.In accordance with the CEN/CENELEC Internal Regula

14、tions, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands

15、, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 15065:2005 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 15065:2005Page 4EN ISO 15065:2005Page 5EN ISO 15065:2005Page 6EN ISO 15065:2005