DIN EN ISO 12952-1-2011 Textiles - Assessment of the ignitability of bedding items - Part 1 Ignition source smouldering cigarette (ISO 12952- 1 2010) German version EN ISO 12952-1 .pdf

《DIN EN ISO 12952-1-2011 Textiles - Assessment of the ignitability of bedding items - Part 1 Ignition source smouldering cigarette (ISO 12952- 1 2010) German version EN ISO 12952-1 .pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 12952-1-2011 Textiles - Assessment of the ignitability of bedding items - Part 1 Ignition source smouldering cigarette (ISO 12952- 1 2010) German version EN ISO 12952-1 .pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、January 2011 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 13.220.40; 97.160!$m27“1741520www.din.deDDIN EN ISO 12952-1Textiles Assessment of the ignitability of bedding items Part 1: Ignition source: smouldering cigarette (ISO 12952-1:2010)English translation of DIN EN ISO 12952-1:2011-01Textilien Bewertung der Entzndbarkeit von Bettzeug Teil 1: Zndquelle

3、: glimmende Zigarette (ISO 12952-1:2010)Englische bersetzung von DIN EN ISO 12952-1:2011-01Textiles valuation de lallumabilit des articles de literie Partie 1: Source dallumage: cigarette en combustion (ISO 12952-1:2010)Traduction anglaise de DIN EN ISO 12952-1:2011-01SupersedesDIN EN ISO 12952-1:19

4、99-02andDIN EN ISO 12952-2:1999-02www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2002.11 DIN EN ISO 12952-1:2011-01 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee

5、ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Working Committee 062-

6、05-43 AA Brennverhalten von Textilien. DIN EN ISO 12952 consists of the following parts, under the general title Textiles Assessment of the ignitability of bedding items: Part 1: Ignition source: smouldering cigarette Part 2: Ignition source: match-flame equivalent The DIN Standards corresponding to

7、 the International Standards referred to in this document are as follows: ISO 3175-2 DIN EN ISO 3175-2 ISO 3175-3 DIN EN ISO 3175-3 ISO 3175-4 DIN EN ISO 3175-4 ISO 6330 DIN EN ISO 6330 ISO 10528 DIN EN ISO 10528 There is no DIN Standard available which corresponds to the International Standard ISO

8、4880 referred to in the EN, but, instead, DIN EN ISO 13943 containing the vocabulary of ISO 4880 and other terms can be applied. Amendments This standard differs from DIN EN ISO 12952-1:1999-02 and DIN EN ISO 12952-2:1999-02 as follows: a) the standard now contains general test methods (DIN EN ISO 1

9、2952-1) and specific test methods (DIN EN ISO 12952-2); b) ISO 4880 and ISO 10528 have been included in Clause 2 “Normative references”; c) ISO/IEC Guide 52 has been deleted from Clause 2 “Normative references”. Previous editions DIN EN ISO 12952-1: 1999-02 DIN EN ISO 12952-2: 1999-02 DIN EN ISO 129

10、52-1:2011-01 3 National Annex NA (informative) Bibliography DIN EN ISO 3175-2, Textiles Dry cleaning and finishing Part 2: Procedures for tetrachloroethene DIN EN ISO 3175-3, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Procedure for testing performance whe

11、n cleaning and finishing using hydrocarbon solvents DIN EN ISO 3175-4, Textiles Professional care, drycleaning and wetcleaning of textiles Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning DIN EN ISO 6330, Textiles Domestic washing and drying procedure

12、s for textile testing DIN EN ISO 10528, Textiles Commercial laundering procedure for textile fabrics prior to flammability DIN EN ISO 13943, Fire safety Vocabulary DIN EN ISO 12952-1:2011-01 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12952-1 October 2

13、010 ICS 13.220.40; 97.160 Supersedes EN ISO 12952-1:1998, EN ISO 12952-2:1998English Version Textiles Assessment of the ignitability of bedding items Part 1: Ignition source: smouldering cigarette (ISO 12952-1:2010) Textiles valuation de lallumabilit des articles de literie Partie 1: Source dallumag

14、e: cigarette en combustion (ISO 12952-1:2010) Textilen Bewertung der Entzndbarkeit von Bettzeug Teil 1: Zndquelle: glimmende Zigarette (ISO 12952-1:2010) This European Standard was approved by CEN on 30 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s

15、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Stand

16、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national sta

17、ndards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

18、 United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 129

19、52-1:2010: EContents DIN EN ISO 12952-1:2011-01 EN ISO 12952-1:2010 (E) 2 Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Principle7 5 Criteria of ignition7 6 Health and safety of operators.8 7 Apparatus .8 8 Cleansing10 9 Atmospheres for conditioning a

20、nd testing .10 10 Test specimens11 11 Test procedures.11 12 Final examination.15 13 Test report 15 Foreword This document (EN ISO 12952-1:2010) has been prepared By Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI, in collaboration with Technica

21、l Committee This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility tha

22、t some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12952-1:1998, EN ISO 12952-2:1998. According to the CEN/CENELEC Internal Regulations, the natio

23、nal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

24、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. ISO/TC 38 “Textiles”. DIN EN ISO 12952-1:2011-01 EN ISO 12952-1:2010 (E) 3 Introduction Fires are sometimes caused by the ignition of bedding items by smokers materials. The ignitability of bedd

25、ing items by a smouldering cigarette or a small open flame is therefore an important feature in the assessment of the risk of fire. It cannot be assumed that protection against a smouldering ignition source will automatically give protection against flaming ignition. Users of this part of ISO 12952

26、should therefore consider the need to submit test specimens to both cigarette and flaming ignition tests. This part of ISO 12952 describes test methods with a smouldering cigarette as the ignition source. Testing against the ignition source of a small open flame is covered in ISO 12952-2. This part

27、of ISO 12952 can be used for the assessment of ignitability of individual items of bedding and of composite arrangements. DIN EN ISO 12952-1:2011-01 EN ISO 12952-1:2010 (E) 4 WARNING This test relates only to the ignitability of materials under the particular conditions of testing. It is not intende

28、d as a means of assessing the full potential fire hazard of the bedding item in use. Particular attention is drawn to the possibility of ignition of lower parts of a bedding assembly when using bedding items which are not themselves ignited. The performance of beds and mattresses requires reference

29、to testing and performance standards other than those described in this part of ISO 12952. 1 Scope This part of ISO 12952 specifies test methods for assessing the ignitability of all bedding items when subjected to a smouldering cigarette. This part of ISO 12952 applies to bedding items, which can n

30、ormally be placed on a mattress, for example: mattress covers; underlays; incontinence sheets and pads; sheets; blankets; electric blankets; quilts (duvets) and covers; pillows (whatever the filling) and bolsters; pillowcases. This part of ISO 12952 does not apply to mattresses, bed bases and mattre

31、ss pads. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3175-2, Texti

32、les Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene DIN EN ISO 12952-1:2011-01 EN ISO 12952-1:2010 (E) 5 ISO 3175-3, Textiles Professional care, drycleaning and wetcleaning of fabrics

33、 and garments Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents ISO 3175-4, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning

34、 ISO 4880, Burning behaviour of textiles and textile products Vocabulary ISO 6330:2000, Textiles Domestic washing and drying procedures for textile testing ISO 10528, Textiles Commercial laundering procedure for textile fabrics prior to flammability testing 3 Terms and definitions For the purposes o

35、f this document, the terms and definitions given in ISO 4880 and the following apply. 3.1 bed mattress placed on top of a bed base with no other bedding items present 3.2 bed assembly stack of successive layers of mattress and various bedding items, with or without a pillow and pillowcase, represent

36、ing a section through the centre of a made-up bed 3.3 bed base structure that supports the mattress 3.4 bedding general term for all items placed on the mattress or the bed by a user to provide comfort and warmth and/or for decorative purposes, for example, sheets, blankets, bed spreads, valances, q

37、uilts, duvets, quilt covers and mattress covers 3.5 bolster long round pillow or cushion 3.6 duvet bedding item made principally from a woven material and filled, for example, with down, feathers or filling fibres NOTE A duvet can be quilted in various ways. 3.7 incontinence sheet sheet to protect t

38、he mattress and bedding for incontinent people 3.8 mattress product in the form of a resilient material, or padding material in combination with steel springs, enveloped by a cover fabric 3.9 mattress cover secondary covering material that can be removed for laundering purposes DIN EN ISO 12952-1:20

39、11-01 EN ISO 12952-1:2010 (E) 6 3.10 mattress pad thin filled bedding item, usually covered with a woven material, placed on the mattress to protect it and to add to the comfort of the bed 3.11 made-up bed bed prepared for use by covering with bedding items 3.12 pillow cushion for a sleepers head or

40、 any object used for that purpose 3.13 quilt bedcover of two thicknesses with padding sewn into compartments 3.14 underlay textile layer between the mattress and the lower sheet 4 Principle A test specimen placed on a testing substrate is subjected to a smouldering cigarette placed on top of and/or

41、below the test specimen. Any progressive smouldering and/or flaming is noted. Where the actual mattress used is known, it can replace the testing substrate. 5 Criteria of ignition 5.1 Progressive smouldering ignition All the types of behaviour given in a) to d) are considered to be progressive smoul

42、dering ignition: a) any test specimen that displays escalating combustion behaviour, making it unsafe to continue the test, and that requires forcible extinction; b) any test specimen that smoulders until it is essentially consumed, after a period of 1 h following the application of the smouldering

43、cigarette; c) any test specimen that produces externally detectable amounts of smoke, heat or glowing, after a period of 1 h following the application of the smouldering cigarette; d) any test specimen that, on final examination (see Clause 12), shows evidence of active smouldering. NOTE In practice

44、, it has been found that there is usually a clear distinction between materials which can char under the influence of the smouldering cigarette, but which do not propagate further (non-progressive), and those where smouldering develops and spreads (progressive). 5.2 Flaming ignition The following be

45、haviour is considered to be flaming ignition: the occurrence of any flames initiated by a smouldering cigarette. DIN EN ISO 12952-1:2011-01 EN ISO 12952-1:2010 (E) 7 6 Health and safety of operators WARNING There is a considerable risk with these tests and it is essential that suitable precautions b

46、e taken, which may include the provision of breathing apparatus and protective clothing. In the interest of safety, the tests shall be conducted in a suitable fume cupboard or purpose-built room, so that individuals are not exposed to fumes (see 7.4). Readily accessible suitable means of extinguishi

47、ng the test specimens shall be provided. Extinction of test specimens can be difficult and care should be taken to dispose of them only when they are completely inert. It can be necessary to immerse smouldering specimens in water or place them in a sealed non-combustible enclosure. To ensure complet

48、e safety, other suitable steps can be required. 7 Apparatus 7.1 Test rig A suitable test rig is illustrated in Figure 1. It consists of a platform of open mesh of at least 450 mm 450 mm, supported by a solid base. The test rig shall correspond to the dimensions of the test specimen, but can be large

49、r than the test specimen. The size of the mesh and the angle iron dimensions in Figure 1 are not critical. For the tests, the rig is placed within the test enclosure (see 7.4). 7.2 Stopwatch A stopwatch shall be used, capable of reading to the nearest second and measuring for at least 1 h. 7.3 Ignition source: smouldering cigarette An un-tipped cylindrical cigarette complying with the following requirements shall be used. length: (68 2) mm; diameter: (8,0 0,5) mm;