DIN EN ISO 10424-2-2008 Petroleum and natural gas industries - Rotary drilling equipment - Part 2 Threading and gauging of rotary shouldered thread connections (ISO 10424-2 2007) E.pdf

《DIN EN ISO 10424-2-2008 Petroleum and natural gas industries - Rotary drilling equipment - Part 2 Threading and gauging of rotary shouldered thread connections (ISO 10424-2 2007) E.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 10424-2-2008 Petroleum and natural gas industries - Rotary drilling equipment - Part 2 Threading and gauging of rotary shouldered thread connections (ISO 10424-2 2007) E.pdf（106页珍藏版）》请在麦多课文档分享上搜索。

1、Juli 2008DEUTSCHE NORM Normenausschuss Erdl- und Erdgasgewinnung (NG) im DINPreisgruppe 31DIN Deutsches Institut fr Normung e.V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e.V., Berlin, gestattet.ICS 75.180.10!$K4“1401757www.din.deDDIN

2、EN ISO 10424-2Erdl- und Erdgasindustrie Bohr- und Frderanlagen Teil 2: Verschraubungen, Kalibrierung und Prfung von drehendenSchulteransatz-Gewindeverbindungen (ISO 10424-2:2007);Englische Fassung EN ISO 10424-2:2007Petroleum and natural gas industries Rotary drilling equipment Part 2: Threading and

3、 gauging of rotary shouldered thread connections(ISO 10424-2:2007);English version EN ISO 10424-2:2007Industries du ptrole et du gaz naturel quipements de forage rotary Partie 2: Filetage et calibrage des connexions rotary filetes paulement(ISO 10424-2:2007);Version anglaise EN ISO 10424-2:2007Allei

4、nverkauf der Normen durch Beuth Verlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 106 SeitenDIN EN ISO 10424-2:2008-07 2 Nationales Vorwort Dieses Dokument (EN ISO 10424-2:2007) wurde vom Technischen Komitee CEN/TC 12 Materialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und E

5、rdgasindustrie“ erarbeitet, dessen Sekretariat von AFNOR (Frankreich) gehalten wird. Es handelt sich dabei um die unvernderte bernahme von ISO 10424-2:2007, erarbeitet vom ISO/TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“, Subcommittee SC

6、 4 Drilling and production equipment“. Fr Deutschland hat hieran der Arbeitskreis AK 4 Bohr- und Frdereinrichtungen“ des NA 109-00-01 AA Materialien, Ausrstung und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgasindustrie“ im Normenausschuss Erdl- und Erdgasgewinnung (NG) mitgearbeitet. Die

7、se Europische Norm enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 13/1983 nur die englische Originalfassung der ISO-Norm. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10424-2 November 2007 ICS 75.180.10 English Version Petroleum and natural gas industries Rotary drilling equipm

8、ent Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007) Industries du ptrole et du gaz naturel quipements de forage rotary Partie 2: Filetage et calibrage des connexions rotary filetes paulement (ISO 10424-2:2007) Erdl- und Erdgasindustrie Bohr- und Frderanlagen

9、Teil 2: Verschraubungen, Kalibrierung und Prfung von drehenden Schulteransatz-Gewindeverbindungen (ISO 10424-2:2007) This European Standard was approved by CEN on 2 November 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

10、 European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (

11、English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulg

12、aria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDI

13、ZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10424-2:2007: EEN ISO 10424-2:2007 (E) 2 Contents

14、Page Introduction .4 1 Scope 5 2 Conformance Units of measurement 5 3 Normative references 5 4 Terms, abbreviated terms, definitions and symbols6 4.1 Terms and definitions .6 4.2 Design types and definitions8 4.3 Abbreviations and symbols9 5 Information to be supplied by purchaser.12 6 Threading. 12

15、 6.1 Thread profile and dimensions . 12 6.2 Bevels for drill collars and tools that mate directly with drill collars 19 6.3 Low-torque feature . 20 7 Product optional features 22 7.1 General. 22 7.2 Stress-relief features 22 7.3 Benchmarks 25 7.4 Surface treatment . 27 7.5 Cold working . 27 7.6 Brea

16、k-in 27 8 Product gauging . 28 8.1 Gauging . 28 8.2 Stand-off measurement 28 8.3 Gauge contact points . 29 8.4 Lead measurement . 29 8.5 Taper measurement 31 8.6 Thread height measurement and gauges 32 9 Gauge relationships for rotary shouldered connections . 32 9.1 Gauge relationship . 32 9.2 Gauge

17、 specifications 33 10 Gauge calibration 45 10.1 Calibration system 45 10.2 Acceptance criteria. 45 10.3 Gauge measurement methods 45 10.4 Gauge certification . 51 Annex A (informative) Tables in USC units . 52 Annex B (informative) Care and use of regional master gauges 61 Annex C (normative) Shipme

18、nt of reference master gauges 63 Annex D (normative) Care and use of working gauges . 65 Annex E (informative) API gauge certification requirements 66 Annex F (informative) Other rotary shouldered connections 69 Annex G (informative) USC units conversion table 90 Annex H (informative) Recommended pr

19、actice for gauging new rotary shouldered connections . 91 Annex I (informative) Calculations . 97 Annex J (informative) API grand and regional master rotary connection gauges 101 Foreword .3 DIN EN ISO 10424-2:2008-07 EN ISO 10424-2:2007 (E) 3 Foreword This document (EN ISO 10424-2:2007) has been pr

20、epared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries” the secretariat o

21、f which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. According to the CEN/CENELEC In

22、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

23、Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10424-2:2007 has been approved by CEN as a EN ISO 10424-2:2007 without any modification. DIN EN ISO 10424-2:2008-07 EN ISO 10424-2:2007 (E)

24、 4 Introduction This International Standard is based on API Spec 7, Specification for rotary drill stem elements. Users of this International Standard should be aware that further or differing requirements may be needed for individual applications. This International Standard is not intended to inhi

25、bit a vendor from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the individual application. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the vendor should identify any variatio

26、ns from this International Standard and provide details. DIN EN ISO 10424-2:2008-07 EN ISO 10424-2:2007 (E) 5 1 Scope This part of ISO 10424 specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries, including dimensional requirements on threads and thre

27、ad gauges, stipulations on gauging practice, gauge specifications, as well as instruments and methods for inspection of thread connections. These connections are intended primarily for use in drill-string components. Other supplementary specifications can be agreed between interested parties for spe

28、cial tolerance requirements, qualification, testing, inspection and finishing. This part of ISO 10424 is applicable to the following preferred rotary shouldered connection designs: a) number (NC) style; b) regular (REG) style; c) full hole (FH) style. These are traceable to an internationally suppor

29、ted system of gauges and calibration 2 Conformance Units of measurement In this part of ISO 10424, data are expressed in both the International System (SI) of units and the United States Customary (USC) system of units. Separate tables for data expressed in SI units and USC units are given in the bo

30、dy of this part of ISO 10424 and Annex A, respectively. Figures express data in both SI and USC units. For a specific order item, it is intended that only one system of units be used, without combining data expressed in the other system. Annex G provides the conversion between SI and USC units used

31、in this part of ISO 10424. Products manufactured to specifications expressed in either of these unit systems shall be considered equivalent and totally interchangeable. Consequently, compliance with the requirements of this part of ISO 10424 as expressed in one system provides compliance with requir

32、ements expressed in the other system. For data expressed in the SI system, a comma is used as the decimal separator and a space as the thousands separator. For data expressed in the USC system, a dot (on the line) is used as the decimal separator and a space as the thousands separator. In the text,

33、data in SI units are followed by data in USC units in brackets. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen

34、t (including any amendments) applies. ISO 10424-1, Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements ISO 119611), Petroleum and natural gas industries Steel drill pipe ISO/IEC 17025, General requirements for the competence of testing and calibration la

35、boratories API Spec 7, Specification for Rotary Drill Stem Elements 1) To be published. (Revision of ISO 11961:1996) DIN EN ISO 10424-2:2008-07 EN ISO 10424-2:2007 (E) 6 4 Terms, abbreviated terms, definitions and symbols 4.1 Terms and definitions For the purposes of this document, the following ter

36、ms and definitions apply. 4.1.1 bevel diameter outside diameter of the contact face of the rotary shouldered connection 4.1.2 box connection box end threaded connection on oil country tubular goods with internal (female) threads 4.1.3 box thread internal (female) threads of a rotary shouldered conne

37、ction 4.1.4 break-in procedure applied to newly manufactured threads to assure correct mating 4.1.5 calibration system documented system of gauge calibration and control 4.1.6 cold working plastic deformation of the surface of the connection at a temperature low enough to induce strain hardening 4.1

38、.7 first perfect thread thread furthest from the sealing face on a pin, or closest to the sealing face on a box, where both the crest and the root are fully formed 4.1.8 full-depth thread thread in which the thread root lies on the minor cone of an external thread or lies on the major cone of an int

39、ernal thread 4.1.9 gauge point imaginary plane, perpendicular to the thread axis of rotary shouldered connections at which the pitch diameter, C, at gauge point is measured NOTE This plane is located 15,875 mm (0.625 0 in) from the make-up shoulder of the pin thread. 4.1.10 interchange stand-off sta

40、nd-off between each member of a gauge set and a corresponding gauge next higher in the ranking scheme: grand master or regional master, reference master, working gauge 4.1.11 lead distance parallel to the thread axis from a point on a thread turn and the corresponding point on the next turn, i.e. th

41、e axial displacement of a point following the helix one turn around the thread axis DIN EN ISO 10424-2:2008-07 EN ISO 10424-2:2007 (E) 7 4.1.12 make-up shoulder sealing shoulder on a rotary shouldered connection 4.1.13 manufacturer firm, company or corporation that operates facilities capable of cut

42、ting the threads and is responsible for compliance with all the applicable provisions of this part of ISO 10424 4.1.14 master gauge gauges used for calibration of other gauges NOTE These include reference master, regional master and grand master gauges. 4.1.15 mating stand-off stand-off between the

43、plug and ring members of a gauge set NOTE Interchange stand-off is the stand-off between each member and a gauge higher in the ranking scheme. 4.1.16 pin connection pin end threaded connection on oil country tubular goods with external (male) threads 4.1.17 pin thread external (male) threads of a ro

44、tary shouldered connection 4.1.18 pitch axial distance between successive threads, which, in a single start thread, is equivalent to lead 4.1.19 pitch cone imaginary cone whose diameter at any point is equal to the pitch diameter of the thread at the same point 4.1.20 pitch diameter diameter at whic

45、h the distance across the threads is equal to the distance between the threads 4.1.21 product drill string component with rotary shouldered connection in accordance with this part of ISO 10424 4.1.22 reference dimension dimension that is a result of two or more other dimensions 4.1.23 rotary shoulde

46、red connection thread connection used on drill stem elements which has coarse, tapered threads and sealing shoulders 4.1.24 stand-off distance between faces of gauges, or gauge and product when mated DIN EN ISO 10424-2:2008-07 EN ISO 10424-2:2007 (E) 8 4.1.25 stress-relief groove feature modificatio

47、n performed on rotary shouldered connections that removes a certain length of the unengaged threads of the pin or box NOTE This process reduces the likelihood of fatigue cracking in the highly stressed area both for box and pin threads due to a reduction of stress concentration. 4.1.26 taper increas

48、e in the diameter of the pitch cone with length NOTE The taper is expressed in millimetres per millimetre (inches per foot) of thread length. 4.1.27 thread form thread profile in an axial plane for a length of one pitch 4.1.28 thread height distance between the crest and root, normal to the axis of

49、the thread 4.1.29 tolerance amount of variation permitted 4.1.30 working gauges gauges used for gauging rotary shouldered connections 4.2 Design types and definitions NOTE Any style of rotary shouldered connection can be made in right-hand (RH) or left-hand (LH) versions. Right-hand is assumed unless otherwise designated as LH. 4.2.1 full-hole style FH style type and size of rotary shouldered connection having thread form of V-040 or V-050 NOTE The number relates to a historical drill-pipe size. 4.2.2 GOST