DIN EN 16139-2014 Furniture - Strength durability and safety - Requirements for non-domestic seating German version EN 16139 2013 + AC 2013《家具 强度耐用性和安全 非家用座椅的要求 德文版本EN 16139-2013+A.pdf

《DIN EN 16139-2014 Furniture - Strength durability and safety - Requirements for non-domestic seating German version EN 16139 2013 + AC 2013《家具 强度耐用性和安全 非家用座椅的要求 德文版本EN 16139-2013+A.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16139-2014 Furniture - Strength durability and safety - Requirements for non-domestic seating German version EN 16139 2013 + AC 2013《家具 强度耐用性和安全 非家用座椅的要求 德文版本EN 16139-2013+A.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、March 2014 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、97.140!%,k“2097297www.din.deDDIN EN 16139Furniture Strength, durability and safety Requirements for non-domestic seating;English version EN 16139:2013 + AC:2013,English translation of DIN EN 16139:2014-03Mbel Festigkeit, Dauerhaltbarkeit und Sicherheit Anforderungen an Sitzmbel fr den Nicht-Wohnbere

3、ich;Englische Fassung EN 16139:2013 + AC:2013,Englische bersetzung von DIN EN 16139:2014-03Mobilier Rsistance, durabilit et scurit Exigences applicables aux siges usage collectif;Version anglaise EN 16139:2013 + AC:2013,Traduction anglaise de DIN EN 16139:2014-03SupersedesDIN EN 16139:2013-05www.beu

4、th.deDocument comprises 19 pagesIn case of doubt, the German-language original shall be considered authoritative.02.14 DIN EN 16139:2014-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2013-05-01. DIN EN 13761:2002-12 and DIN EN 15373:200

5、7-09 may be used in parallel until 1 September 2013. National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN 16139:2013 + AC:2013) has been prepared by Technical Committee CEN/TC 207 “Furn

6、iture”, (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), Working Committee NA 042-05-19 AA Brombel. Where this standard has been identified by the Ausschuss fr Produktsicherh

7、eit (German Committee for Product Safety) and reference to it has been published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be presumed

8、that seating which complies with this standard fulfils the relevant health and safety requirements. Where they comply with the provisions laid down in Section 5 of the Product Safety Act, such products may then be marked with the GS mark (German “safety tested” mark) as awarded to the manufacturer b

9、y an authorized “GS organization”. Amendments This standard differs from DIN EN 13761:2002-12 and DIN EN 15373:2007-09 as follows: a) DIN EN 13761:2002-12, Office furniture Visitors chairs and DIN EN 15373:2007-09, Furniture Strength, durability and safety Requirements for non-domestic seating have

10、been combined into one standard with the title of DIN EN 15373; b) Clause 3 “Terms and definitions” has been updated; c) the test levels have been reduced from three to two test levels, see Annex C; d) Subclause 5.4 of DIN EN 13761 has been included as Clause 5 “Safety, strength and durability requi

11、rements”; e) Clause 4 of DIN EN 13761 has been included as Annex C “Dimensional requirements for office visitor chairs”; f) the standard has been editorially revised. Compared with DIN EN 16139:2013-05, the following corrections have been made: a) Subclauses 4.3.2 and 4.3.3 have been revised. Previo

12、us editions DIN EN 13761: 2002-12 DIN EN 15373: 2007-09 DIN EN 16139: 2013-05 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16139 March 2013 + AC July 2013 ICS 97.140 Supersedes EN 13761:2002, EN 15373:2007 English Version Furniture Strength, durability and safety Requirements for non-domesti

13、c seating Mobilier Rsistance, durabilit et scurit Exigences applicables aux siges usage collectif Mbel Festigkeit, Dauerhaltbarkeit und Sicherheit Anforderungen an Sitzmbel fr den Nicht-Wohnbereich EN 16139:2013 was approved by CEN on 2013-01-12 and Corrigendum AC:2013 on 2013-07-10. CEN members are

14、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t

15、he CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cen

16、tre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

17、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels

18、2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16139:2013 + AC:2013 E Contents Page Foreword to EN 16139:20133 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Safety 8 4.1 General 8 4.2 Shear a

19、nd squeeze points 8 4.2.1 Shear and squeeze points when setting up and folding .8 4.2.2 Shear and squeeze points under influence of powered mechanism .8 4.2.3 Shear and squeeze points during use .8 4.3 Stability .8 4.3.1 General 8 4.3.2 Swivelling chairs 9 4.3.3 Non swivelling chairs 9 4.4 Rolling r

20、esistance of the unloaded chair 9 4.5 Safety of the construction 9 5 Safety, strength and durability requirements .9 6 Test methods 10 7 Information for use . 11 8 Test report . 12 Annex A (informative) Additional tests 13 Annex B (informative) Test severity in relation to applications 14 Annex C (i

21、nformative) Dimensional requirements for office visitor chairs 15 C.1 General . 15 C.2 Dimensional requirements . 15 C.2.1 Seat height a . 15 C.2.2 Seat depth b 15 C.2.3 Seat width d 15 C.2.4 Distance between arm rests r . 15 C.3 Determination of reference points 15 C.3.1 Point “A” 15 C.3.2 Back sup

22、porting point “S” . 15 C.4 Determination of dimensions 15 C.4.1 Seat height a . 15 C.4.2 Seat depth b 16 C.4.3 Seat width d 16 C.4.4 Distance between arm rests r . 16 Bibliography . 17 Foreword to EN 16139:2013/AC:2013.4 DIN EN 16139:2014-03 EN 16139:2013 + AC:2013 (E) 2 3 Foreword to EN 16139:2013

23、This document (EN 16139:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 20

24、13, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rig

25、hts. This document supersedes EN 15373:2007 and EN 13761:2002. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Eston

26、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16139:2014-03 EN

27、16139:2013 + AC:2013 (E) 3 Foreword to EN 16139:2013/AC:2013 This document (EN 16139:2013/AC:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI (Italy). DIN EN 16139:2014-03 EN 16139:2013 + AC:2013 (E) 4 Introduction This European Standard

28、has been developed as a merging project out of the following European Standards: EN 15373:2007, Furniture Strength, durability and safety Requirements for non-domestic seating EN 13761:2002, Office furniture Visitors chairs All requirements in EN 16139 are taken from these two standards, where the n

29、ew test level 2 reflects test level 3 of EN 15373 and the new test level 1 reflects test level 2 of EN 15373 and the former EN 13761. The correspondent test method standard for this document, EN 1728, was also under revision in the same time period. In order to avoid a further revision of EN 16139 f

30、or the alignment with EN 1728, this project was slowed down until the final draft of EN 1728 was available. DIN EN 16139:2014-03 EN 16139:2013 + AC:2013 (E) 5 1 Scope This European Standard specifies requirements for the safety, strength and durability of all types of non-domestic seating intended t

31、o be used by adults with a weight of not more than 110 kg, including office visitor chairs. This European Standard does not apply to ranked seating, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards or drafts exist.

32、It does also not apply to work chairs for industrial use. This European Standard does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms. This European Standard does not include requirements for the res

33、istance to ageing, degradation and flammability. Annex A contains additional tests. Annex B contains information on the level of test severity in relation to applications. Annex C contains dimensional requirements for office visitor chairs. 2 Normative references The following documents, in whole or

34、 in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1022, Domestic furniture Seating Determi

35、nation of stability EN 1335-2:2009, Office furniture Office work chair Part 2: Safety requirements EN 1335-3:2009, Office furniture Office work chair Part 3: Test methods EN 1728:2012, Furniture Seating Test methods for the determination of strength and durability 3 Terms and definitions For the pur

36、poses of this document, the following terms and definitions apply. 3.1 accessible part part to which access can easily be gained by the user when the seating is in its intended configuration of use and for which the probability of unintentional user contact is high 3.2 part accessible during setting

37、 up and folding part to which access can only be gained when setting up and folding the furniture DIN EN 16139:2014-03 EN 16139:2013 + AC:2013 (E) 6 3.3 shear and squeeze points shear and squeeze points exist if the distance between two accessible parts moving relatively to each other is less than 2

38、5 mm and more than 8 mm for adults and children older than 3 years in any position during movement 3.4 castors castors assembly comprising a housing, one or more wheels, an axle and, if required, accessories 3.5 leg rest extension of the seat area intended to support the legs of the sitter Note 1 to

39、 entry: A leg rest may or may not be permanently attached to the seat. 3.6 foot rail component intended as an occasional support for the feet or to assist getting on and off a high chair or stool Note 1 to entry: A foot rail may be a part of the structure of the underframe of a chair or stool. 3.7 v

40、isitor chair seating for one person used in the office environment additional to the office work chair Note 1 to entry: It is used for meetings or consultations as well as for reading, writing, listening and waiting. 3.8 median plane vertical plane passing through the geometric centre of the seat, d

41、ividing the seat from side to side into two equal parts Note 1 to entry: See Figure 1. Key 1 median plane Figure 1 Median plane DIN EN 16139:2014-03 EN 16139:2013 + AC:2013 (E) 7 4 Safety 4.1 General The seating shall be so designed as to minimise the risk of injury to the user. All accessible parts

42、 (3.1) shall be so designed that physical injury and damage are avoided. This requirement is met when: a) accessible corners are rounded or chamfered; b) the edges of the seat, back rest and arm rests which are in contact with the user when sitting in the chair are rounded or chamfered; c) the edges

43、 of handles are rounded or chamfered in the direction of the force applied; d) all other edges are free from burrs and rounded or chamfered; e) the ends of hollow components are closed or capped. Movable and adjustable parts shall be designed so that injuries and inadvertent operation are avoided. I

44、t shall not be possible for any load bearing part of the seating to come loose unintentionally. All parts which are lubricated to assist sliding shall be designed to protect users from lubricant stains when in normal use. 4.2 Shear and squeeze points 4.2.1 Shear and squeeze points when setting up an

45、d folding Unless 4.2.2 or 4.2.3 are applicable, shear and squeeze points that are created only during setting up and folding, including tipping seat actions, are acceptable, because the user can be assumed to be in control of his/her movements and to be able to cease applying the force immediately u

46、pon experiencing pain. The edges of parts moving relative to each other and creating shear and squeeze points shall be as specified in 4.1. 4.2.2 Shear and squeeze points under influence of powered mechanism With the exception of tipping seats there shall be no shear and squeeze points created by parts of the seating operated by powered mechanisms, e.g. springs and gas lifts. 4.2.3 Shear and squeeze points during use There shall be no shear and squeeze points created by forces applied during normal use as well as during normal movements and actions, see Table 1. 4.3 Stability 4.3