DIN EN 620-2011 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials German version EN 620 2002+A1 2010《连续搬运设备和系统 散装物.pdf

《DIN EN 620-2011 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials German version EN 620 2002+A1 2010《连续搬运设备和系统 散装物.pdf》由会员分享，可在线阅读，更多相关《DIN EN 620-2011 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials German version EN 620 2002+A1 2010《连续搬运设备和系统 散装物.pdf（59页珍藏版）》请在麦多课文档分享上搜索。

1、July 2011 Translation by DIN-Sprachendienst.English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 5

2、3.040.10!$sk“1805672www.din.deDDIN EN 620Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials(includes Amendment A1:2010)English translation of DIN EN 620:2011-07Stetigfrderer und Systeme Sicherheits- und EMV-Anforderungen an ortsfeste Gur

3、tfrderer fr Schttgut (enthltnderung A1:2010)Englische bersetzung von DIN EN 620:2011-07Equipements et systmes de manutention continue Prescriptions de scurit et de CEM pour les transporteurs courroie fixes pour produitsen vrac (Amendement A1:2010 inclus)Traduction anglaise de DIN EN 620:2011-07Super

4、sedesDIN EN 620:2002-08www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.5906.11 DIN EN 620:2011-07 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This standard has been prepared

5、by Technical Committee CEN/TC 148 “Continuous handling equipment and systems Safety” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-22-31 AA Stetigfrdere

6、r of Section Frdertechnik. Representatives of manufacturers and users of continuous handling equipment, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Di

7、rective”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the E

8、uropean Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in this document have been published as the corresponding DIN E

9、N or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available, except for the following: ISO 2148 DIN 15201-1 ISO 6184-1 DIN EN 26184-1 Amendments This standard differs from

10、 DIN EN 620:2002-08 as follows: a) the standard has been revised and brought in line with the new Machinery Directive 2006/42/EC; b) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been updated; c) Annex ZB (informati

11、ve) “Coverage of Essential Requirements of EU Directives” has been modified on the basis of the new EMC Directive 2004/108/EC. Previous editions DIN EN 620: 2002-08 2 DIN EN 620:2011-07 National Annex NA (informative) Bibliography DIN 15201-1, Continuous mechanical handling equipment Terminology, sy

12、mbols, graphical symbols DIN EN 26184-1, Explosion protection systems Part 1: determination of explosion indices of combustible dust in air 3 DIN EN 620:2011-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 620:2002+A1 December 2010 ICS 53.040.10 Supersedes

13、EN 620:2002English Version Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials Equipements et systmes de manutention continue Prescriptions de scurit et de CEM pour les transporteurs courroie fixes pour produits en vrac Stetigfrderer und

14、Systeme Sicherheits- und EMV- Anforderungen an ortsfeste Gurtfrderer fr Schttgut This European Standard was approved by CEN on 16 november 2001 and includes Amendment 1 approved by CEN on 9 November 2010.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

15、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exi

16、sts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the samestatus as the official versions. CEN members are the national sta

17、ndards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

18、United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 620:2002

19、+A1:2010: EEN 620:2002+A1:2010 (E) 2 Contents Page Foreword 3Introduction . 41 Scope 52 Normative references 63 Terms and definitions . 84 List of hazards 124.1 Mechanical hazards . 124.2 Electrical hazards 144.3 Thermal hazards 144.4 Hazards due to electromagnetic radiation 144.5 Fire or explosion

20、hazards . 154.6 Hazards generated by neglected ergonomic principals in machine design . 154.7 Hazards arising from failure of energy supply and other functional disorders 154.8 Hazards arising during inspection, maintenance and cleaning . 155 Safety and EMC requirements and/or measures 165.1 Measure

21、s for protection against mechanical hazards . 165.2 Measures for protection against electrical hazards . 365.3 Measures for protection against thermal hazards . 375.4 Electromagnetic compatibility (EMC) 385.5 Measures for protection against fire and explosion hazards due to the materials conveyed 39

22、5.6 Measures for protection against hazards generated by neglected ergonomic principles in machine design (mismatch of machinery with human characteristics and abilities) 395.7 Measures for protection against hazards caused by failure of energy supply, and other functional disorders 395.8 Measures f

23、or protection against hazards arising during inspection, maintenance and cleaning 426 Verification of safety and EMC requirements and/or measures . 437 Information for use 467.1 Instruction handbook 467.2 Marking . 49Annex A (normative) Fire or explosion hazard 50Annex ZA (informative) !Relationship

24、 between this European Standard and the Essential Requirements of the EU Directive 2006/42/EC“ 52Annex ZB (informative) !Coverage of Essential Requirements of EU Directives“ 54Bibliography 55DIN EN 620:2011-07 EN 620:2002+A1:2010 (E) 3 Foreword This document (EN 620:2002+A1:2010) has been prepared b

25、y Technical Committee CEN /TC 148, “Continuous handling equipment and systems - Safety“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and c

26、onflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This docu

27、ment includes Amendment 1, approved by CEN on 2010-11-09. This document supersedes EN 620:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the Europe

28、an Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This !standard“ forms part of a series of five !standards“ the titles of which are given below: EN

29、 617 “Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers“ ; EN 618 “Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk materials

30、 except fixed belt conveyors” ; !EN 619“ ”Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads” ; EN 620 “Continuous handling equipment and systems Safety and EMC requirements for fixed belt con-veyors for bulk material” ; EN 741 “

31、Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials”. !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro

32、pean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and U

33、nited Kingdom. DIN EN 620:2011-07 EN 620:2002+A1:2010 (E) 4 Introduction This European Standard is a type C Standard as stated in EN 1070:1998. The products concerned and the extent to which hazards are covered are indicated in the scope of this standard. While producing this standard it was assumed

34、 that: negotiations occur between the manufacturer and the purchaser concerning particular conditions for the use and places of use for the machinery related to health and safety; only suitably trained persons will operate this machinery; the machinery will be kept in good repair and working order,

35、in accordance with the manufacturers instructions, to retain specified health and safety characteristics throughout its working life; the place of installation is adequately lit. the place of installation will allow safe use of the machinery; by design of the load bearing elements, the safe operatio

36、n of the system and components is assured for loading ranging from zero to 100 % of the rated capacities and during testing; all parts of the machinery without specific requirements, will be: a) made from materials of adequate strength and durability and of suitable quality for their intended purpos

37、e; b) of sound mechanical construction; c) designed in accordance with the usual engineering practice and engineering codes, taking account of all failure modes and incorporating appropriate safety factors. EN 617, EN 618 and EN 741 need to be considered for a complete continuous handling system (ma

38、chine). DIN EN 620:2011-07 EN 620:2002+A1:2010 (E) 5 1 Scope 1.1 This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 a

39、nd designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered. 1.2 This standard applies to use in ambient air temperatures of -15 C to + 40 C. 1.3 This standard does not cover: a) use

40、in open cast lignite mining or use underground, such as in mines or tunnels; b) use in public areas or for man-riding; c) floating, dredging and ship mounted equipment; d) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pharmaceuticals;

41、e) conveyors using a moving belt with other than a continuous rubber or polymeric surface for the conveying medium; f) transportation of the conveyor; g) the design of the supporting structure which is not part of a conveyor (see 3.2); h) the effects of wind; i) hazards resulting from handling speci

42、fic hazardous materials, (e.g. explosives, radiating material); j) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust; k) biological and micro-biological (viral or bacterial) hazards; l) hazards due to heat radiation from the materials handled; m) hazard

43、s caused by operation in electromagnetic fields outside the range of EN 61000-6-2:1999; n) hazards caused by operation subject to special regulations (e.g. explosive atmospheres); o) hazards caused by noise; p) hazards caused by the use of ionising radiation sources; q) hazards caused by hydraulic e

44、quipment. The safety requirements of this standard apply to equipment and systems placed on the market after the date of publication of this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the typ

45、e of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. DIN EN 620:2011-07 EN 620:2002+A1:2010 (E) 6 2 Normative references The following referenced documen

46、ts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 294:1992, Safety of machinery Safety distances to prevent dange

47、r zones being reached by the upper limbs EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 418:1992, Safety of machinery Emergency stop equipment Functional aspects Principles for design EN 457:1992, Safety of machinery Auditory danger signals General requ

48、irements Design and testing (ISO 7731:1986, modified) EN 563:1994, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces EN 574:1996, Safety of machinery Two-hand control devices Functional aspects Principles for design EN 614-1:1995, Safety of machinery Ergonomic design pr