DIN EN 480-15-2013 Admixtures for concrete mortar and grout - Test methods - Part 15 Reference concrete and method for testing viscosity modifying admixtures German version EN 480-.pdf

《DIN EN 480-15-2013 Admixtures for concrete mortar and grout - Test methods - Part 15 Reference concrete and method for testing viscosity modifying admixtures German version EN 480-.pdf》由会员分享，可在线阅读，更多相关《DIN EN 480-15-2013 Admixtures for concrete mortar and grout - Test methods - Part 15 Reference concrete and method for testing viscosity modifying admixtures German version EN 480-.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、June 2013 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91

2、.100.30!%P“2022545www.din.deDDIN EN 480-15Admixtures for concrete, mortar and grout Test methods Part 15: Reference concrete and method for testing viscosity modifyingadmixtures;English version EN 480-15:2013,English translation of DIN EN 480-15:2013-06Zusatzmittel fr Beton, Mrtel und Einpressmrtel

3、Prfverfahren Teil 15: Referenzbeton und Prfverfahren zur Prfung von viskosittsmodifizierendenZusatzmitteln;Englische Fassung EN 480-15:2013,Englische bersetzung von DIN EN 480-15:2013-06Adjuvant pour bton, mortier et coulis Mthodes dessai Partie 15: Bton de rfrence et mthode dessai des adjuvants mod

4、ificateurs deviscosit;Version anglaise EN 480-15:2013,Traduction anglaise de DIN EN 480-15:2013-06www.beuth.deDocument comprises 9 pagesIn case of doubt, the German-language original shall be considered authoritative.06.13DIN EN 480-15:2013-06 2 A comma is used as the decimal marker. National forewo

5、rd This document (EN 480-15:2013) has been prepared by Technical Committee CEN/TC 104 Concrete and related products“ (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Com

6、mittee NA 005-07-23 AA Betonzusatzmittel (SpA zu CEN/TC 104/SC 3). EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 480-15 March 2013 ICS 91.100.30 English Version Admixtures for concrete, mortar and grout - Test methods - Part 5: Reference concrete and method for testing viscosity modifying adm

7、ixtures Adjuvant pour bton, mortier et coulis - Mthodes dessai - Partie 15: Bton de rfrence et mthode dessai des adjuvants modificateurs de viscosit Zusatzmittel fr Beton, Mrtel und Einpressmrtel - Prfverfahren - Teil 15: Referenzbeton und Prfverfahren zur Prfung von viskosittsmodifizierenden Zusatz

8、mitteln This European Standard was approved by CEN on 19 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph

9、ical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibilit

10、y of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

11、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIO

12、N EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 480-15:2013: E1EN 480-15:2013 (E) 2 Contents Page Foreword . 3 1 Scope 4 2 Normative referen

13、ces . 4 3 Constituent materials . 4 3.1 Cement . 4 3.2 Aggregate . 4 3.3 Mixing water . 5 4 Reference concrete 5 5 Preparation of reference concrete . 6 5.1 Mix proportions 6 5.2 Mixing and testing 6 6 Test report 7 DIN EN 480-15:2013-06 EN 480-15:2013 (E) 3 Foreword This document (EN 480-15:2013) h

14、as been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and con

15、flicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This d

16、ocument has been drafted by Subcommittee 3 (SC 3) of CEN/TC 104 “Admixtures for concrete, mortar and grout”. This draft European Standard is part of the series EN 480, Admixtures for concrete, mortar and grout Test methods which is comprised of the following parts: Part 1: Reference concrete and ref

17、erence mortar for testing Part 2: Determination of setting time Part 4: Determination of bleeding of concrete Part 5: Determination of capillary absorption Part 6: Infrared analysis Part 8: Determination of the conventional dry material content Part 10: Determination of water soluble chloride conten

18、t Part 11: Determination of air void characteristics in hardened concrete Part 12: Determination of the alkali content of admixtures Part 13: Reference masonry mortar for testing mortar admixtures Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic

19、 electro-chemical test Part 15: Reference concrete and method for testing viscosity modifying admixtures (the present document) This European Standard is applicable together with the other standards of the EN 480 series and for testing admixtures in accordance with the EN 934 series of standards. Ac

20、cording to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

21、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 480-15:2013-06 EN 480-15:2013 (E) 4 1 Scope This European Standard specifies the c

22、onstituent materials, the composition and the mix procedure to produce a reference concrete with a prescribed consistency and segregated portion for testing viscosity modifying admixtures as defined in EN 934-2. It also describes how to determine the requirements for the test mix in comparison with

23、the control mix. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in

24、cluding any amendments) applies. EN 196-2, Methods of testing cement Part 2: Chemical analysis of cement EN 196-6, Methods of testing cement Part 6: Determination of fineness EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN 934-2, Admixtures for conc

25、rete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labelling EN 1008, Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing

26、water for concrete EN 12350-7, Testing fresh concrete Part 7: Air content Pressure methods EN 12350-8, Testing fresh concrete Part 8: Self-compacting concrete Slump-flow test EN 12350-11, Testing fresh concrete Part 11: Self-compacting concrete Sieve segregation test EN 12390-1, Testing hardened con

27、crete Part 1: Shape, dimensions and other requirements for specimens and moulds EN 12390-2, Testing hardened concrete Part 2: Making and curing specimens for strength tests EN 12620, Aggregates for concrete 3 Constituent materials 3.1 Cement The reference concrete shall be made with a CEM l cement o

28、f strength class 42,5 or 52,5 conforming to EN 197-1. The cement used shall have a C3A content of 7 % to 11 % by mass calculated from chemical analysis according to EN 196-2 and a specific surface of 3 200 cm2/g to 4 600 cm2/g determined according to EN 196-6. 3.2 Aggregate A natural normal weight a

29、ggregate conforming to EN 12620 with low water absorption ( 2 % by mass) shall be used. The grading shall conform to Table 1. DIN EN 480-15:2013-06 EN 480-15:2013 (E) 5 Table 1 Aggregate for reference concrete Aperture size - mm Percentage by mass passing the test sieve 16 95 to 100 12 85 to 100 8 6

30、2 to 74 4 42 to 52 2 28 to 38 1 19 to 29 0,500 11 to 21 0,250 4 to 14 0,125 2 to 6 0,063 0 to 2 3.3 Mixing water Water according to EN 1008, or distilled or de-ionised water shall be used as mixing water. Wash water from concrete production shall not be used. 4 Reference concrete Unless otherwise sp

31、ecified, tests on the reference concrete are performed as comparative tests. That is, the performance of the admixtures is determined by comparing the reference concrete containing the viscosity modifying admixture (test mix) with the reference concrete made without the viscosity modifying admixture

32、 (control mix) but otherwise with the same aggregate/cement ratio and constituents from the same delivery. The requirements for the reference concrete are given in Table 2. The fresh concrete shall be fully compacted. The air content of the control mix shall not exceed 2 % by volume. DIN EN 480-15:2

33、013-06 EN 480-15:2013 (E) 6 Table 2 Requirements for reference concrete Constituent / test Requirement Reference Cement (400 10) kg/m3Aggregate According to 3.2. The aggregate: cement ratio shall be recorded Superplasticizer to EN 934-2 Within manufacturers normal range Water 230 kg/m3Slump flow (SF

34、) to EN 12350-8 Control mix 660 mm to 750 mm Test mix control mix Sieve segregation (SR) to EN 12350-11 Control mix 15 % SR 30 % Air content to EN 12350-7 Control mix 2 % 5 Preparation of reference concrete 5.1 Mix proportions The mix proportions shall be in accordance with Table 2. The aggregate sh

35、all be used in an oven dry condition ( 105 C) to remove doubts on moisture content variation. If the aggregate is not oven dry, its moisture content shall be determined and the aggregate and water content shall be corrected accordingly. In the case of dispute, oven dry aggregates shall be used. The

36、dosage of the superplasticizer and the quantity of water in the control mix shall be such as to obtain an initial slump flow (SF) and sieve segregation (SR) in accordance with Table 2. The test mix containing the viscosity modifying admixture shall have the same water content, cement content and the

37、 same aggregate: cement ratio as the control mix but the dosage of superplasticizer shall be adjusted if necessary to give a consistence not less than that of the control mix. 5.2 Mixing and testing Prior to mixing, each of the constituents shall be conditioned to a temperature of (20 2) C. The foll

38、owing mixing technique shall be adopted to ensure repeatability of results and eliminate initial moisture absorption effects on consistence. Use a forced action pan mixer to a minimum of 50 % and a maximum 90 % of capacity. Wipe the inside with a damp cloth if dry. Add all the aggregates to the pan

39、mixer with half the mixing water. Mix for 2 min then stand for 2 min. Cover the pan mixer during the standing period to minimise evaporation effects. Restart the mixer for 30 s after or while adding the cement. Over the next 30 s, add the remaining water and admixtures as appropriate to the mix (not

40、ing any manufacturers recommendations with respect to the order and timing). Mix for a further 2 min. Determine the slump flow (SF) and start the sieve segregation test (SR) within 10 min of completion of mixing. DIN EN 480-15:2013-06 EN 480-15:2013 (E) 7 If the slump flow and sieve segregation of t

41、he control mix are outside the limits in Table 2, discard the mix and repeat at a revised water or superplasticiser content. If the slump flow of the test mix is not equal to or greater than the slump flow of the control mix, discard the mix and repeat at a revised superplasticiser content. Determin

42、e the fresh density and air content within 30 min from completion of mixing (if necessary the concrete may be remixed for 10 s). If the air content and/or cement content of the control mix calculated from the fresh density are outside the limits in Table 2, discard the mix and test a new mix. Take t

43、hree specimens from each mix for compressive strength testing. The control mix should be held for 60 min to 90 min then remixed for 1 min before taking the specimens to prevent segregation in the cube or cylinder mould. The test mix specimens should not be remixed but be made within 60 min from comp

44、letion of initial mixing. Prepare and cure the specimens in accordance with EN 12390-2 using moulds conforming to EN 12390-1. If the compressive strength of one of the specimens varies from the average of the set by more than 10 % it shall be discarded and the average recalculated from the remaining

45、 two specimens. 6 Test report The test report shall include the following information for the control and test mixes: a) A reference to this standard. b) Aggregate: 1) source and type; 2) crushed / uncrushed; 3) grading; 4) moisture content if not oven dry. c) Cement: 1) source; 2) notation to EN 19

46、7-1 including strength class; 3) C3A content; 4) specific surface. d) Concrete: 1) aggregate: cement ratio of control and test mixes; 2) admixture dose in the control and test mixes (superplasticizer and the viscosity modifying admixture); 3) consistence, slump flow (SF); 4) sieve segregation, segregated portion (SR); 5) air content; 6) fresh bulk density; 7) compressive strength individual and average results. DIN EN 480-15:2013-06