DIN EN 1559-6-1999 Founding - Technical conditions of delivery - Part 6 Additional requirements for zinc alloy castings German version EN 1559-6 1998《铸造 交货技术条件 第6部分 锌合金铸件的附加要求》.pdf

《DIN EN 1559-6-1999 Founding - Technical conditions of delivery - Part 6 Additional requirements for zinc alloy castings German version EN 1559-6 1998《铸造 交货技术条件 第6部分 锌合金铸件的附加要求》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1559-6-1999 Founding - Technical conditions of delivery - Part 6 Additional requirements for zinc alloy castings German version EN 1559-6 1998《铸造 交货技术条件 第6部分 锌合金铸件的附加要求》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM Januarv 1999 Founding - Technical conditions of delivery Part 6: Additional requirements for zinc alloy castings English version of DIN EN 1559-6 DIN EN 1559-6 - ICs 77.150.60 Descriptors: Founding, castings, zinc alloys, technical delivery conditions. Gieereiwesen - Technische Lieferb

2、edingungen - Teil 6: Zustzliche Anforderungen an Gustcke aus Zinklegierungen European Standard EN 1559-6 : 1998 has the status of a DIN Standard. National foreword This standard has been prepared by CEN/TC 209. The responsible German body involved in its preparation was theNormenausschu Nichteisenme

3、talle (Non- ferrous Metals Standards Committee), Technical Committee Zink. EN comprises 6 pages. No pari of this standard may be reproduced without the prior permission of Ref. No. DIN EN 1559-6 : 1999-0 . . . V Deutsches Institut fur Normung e. V., Berlin. Luth Verlag GmbH, D-10772 Berlin, has the

4、exclusive right of sale for German Standards (DIN-Normen). English price group 06 Sales No. 1106 07.99 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1559-6 November 1998 ICs 77.150.60 Descriptors: Founding, castings, zinc alloys, technical delivery conditions. English version Founding - Techn

5、ical conditions of delivery Part 6: Additional requirements for zinc alloy castings Fonderie - Conditions techniques de fourniture - Partie 6: Spcifications complmentaires pour les pices moules en alliage de zinc Gieereiwesen - Technische Lieferbedingungen - Teil 6: Zustzliche Anforderungen an Gustc

6、ke aus Zinklegierungen This European Standard was approved by CEN on 1998-1 0-22. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b

7、ibliographical references concerning such national stand- ards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibili

8、ty of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Ne

9、therlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels O 1998. CEN - All rights of exploitation in any form and

10、by any means reserved worldwide for CEN national members. Ref. No. EN 1559-6 : 1998 E Page 2 EN 1559-6 : 1998 Contents Page 2 Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . introduction . . . . . , . 3 1 Scope . 3 2 3 Normative references . . . . . . . . . . . . . Definitions . . . .

11、 , . . . . . . . . . . . . . . . . 3 4 4 information to be supplied by the purchaser 4 5 Designations . . . . . . . . . . . . . . . . . . . . 4 6 Manufacture . . . . . . . . . . . . . . . . . . . . 6.1 Manufacturing process . . . . . . . . . . . . . 6.2 Welding operations . . . . . . . . . . . . . .

12、 . . 4 4 4 7.2 Material . . . . . . . . . . . . . . . . . . . . . . . . 7.3 Casting . . . . . . . . . . . . . . . . . . . . . . . . 8 8. i 8.2 8.3 8.4 8.5 8.6 8.7 8.8 Testing and documents on material testing . . . . . . , . . . . . , . . . . . General . . . . . . . . . . . . . . . . . . , . . . . .

13、 Inspection and testing . . . . . . . . . . . . . . Test unit sampling . . . . . . . . . . . . . . . . Samples . . . . . . . . . . . . . . . . . . . . . . . Test methods . . . . . . . . . . . . . . , . . . . . Invalidation of tests . . . . . . . . . . . . . . . . Retests . . . . . . . . . . . . . .

14、. . . . . . . . . . Sorting and reprocessing . . . . . . . . , . , . 9 Marking . . . . . . . . . . . . . . . . . . . . 10 Packaging and surface protection , . . . 11 Complaints . . . . . . . . . . . . . . . . . Page 4 4 5 5 5 5 5 5 5 5 6 6 6 6 7 Requirements , . . . . . . . . . . . . . . . . . . 7.1

15、 General . . . . . . . . . . . . . . . . . . . . . . . . 4 4 Foreword This European Standard has been prepared by Technical Committee CENnC 209 “Zinc and zinc alloys“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by public

16、ation of an identical text or by endorsement, at the latest by May 1999, and conflicting national standards shall be withdrawn at the latest by May 1999. This European Standard is one of several which specify technical delivery conditions for castings. The other standards in this series are: EN 1559

17、-1 Founding - Technical conditions of delivery - Part 1 : General prEN 1559-2 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings EN 1559-3 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings prEN 1559-4 Foundin

18、g - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings EN 1559-5 Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings According to the CENICENELEC Internal Regulations, the national standards organizat

19、ions of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 3 EN 1559-6 : 1998 I

20、ntroduction CENiTC 209 “Zinc and zinc alloys“ has prepared a product standard covering zinc alloy castings. In order to assist manufacturers and purchasers to prepare proper contractual arrangements and prevent misunderstanding, CEN/TC 190 “Foundry technology“ approved the preparation of a series of

21、 standards covering technical delivery conditions. These have been prepared as separate parts. This European Standard covers the additional technical delivery conditions for zinc alloy castings, e.g. optional information, manufacturing process, welding operation, additional requirements regarding co

22、ndition of the casting, test methods. This European Standard cannot be used alone for compiling a specification for ordering and supplying zinc alloy castings, but as a complement to EN 1559-1. The following symbols are used in this standard: - clauses and subclauses preceded by indicates no additio

23、nal requirements to EN 1559-1; - subclauses preceded by * indicates requirements that are optional, which can be agreed at the time of ordering; - clauses and subclauses without a symbol are mandatory. 1 Scope This pari of EN 1559 applies to castings made from zinc alloys produced by sand casting, p

24、ermanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for zinc alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing,

25、 such as remelting, grinding or extrusion. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated ref

26、erences, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. EN 1371-1 Founding - Liquid penetrant inspection - Par

27、t 1 : Sand, gravity die and low pressure die castings EN 1371-2 Founding - Liquid penetrant inspection - Part 2: Investment castings EN 1559-1 Founding - Technical conditions of delivery - Part 1: General EN 1774 Zinc and zinc alloys - Alloys for foundry purposes - Ingots and liquid prEN 12681 Found

28、ing - Radiographic inspection EN 12844 Zinc and zinc alloys - Castings - Specifications Page 4 EN 1559-6 : 1998 3 Definitions See EN 1559-1, EN 1774 and EN 12844. 4 Information to be supplied by the purchaser 5 Designations The designation of zinc alloy castings by alloy number or by alloy short des

29、ignation shall be in accordance with EN 12844. This designation shall be used on drawings, in the order and on the product according to EN 12844. The designation describes the zinc alloy based on chemical composition. NOTE: Designations of cast zinc alloys are given in EN 1774. 6 Manufacture 6.1 Man

30、ufacturing process 6.2 Welding operations 6.2.1 General 6.2.2 w Production welding In addition to EN 1559-1, welding shall not be permitted for pressure die castings, but may be used for other types of castings. 7 Requirements 7.1 rn General 7.2 rn Material 7.3 Casting 7.3.1 rn Chemical composition

31、7.3.2 rn Mechanical properties 7.3.3 Non-destructive testing 7.3.3.1 - EN 1559-1 shall apply with the following additions: - The liquid penetrant inspection shall be carried out in accordance with either EN 1371-1 or EN 1371-2, as appropriate. - The radiographic inspection shall be carried out in ac

32、cordance with prEN 12681. 7.3.3.2 The surface condition of the casting shall be agreed either at the time of ordering or shall correspond to the initial sample. Page 5 EN 1559-6 : 1998 7.3.3.3 For pressure die castings, unacceptable external and internal discontinuities shall lead to a rejection of

33、the part. 7.3.3.4 7.3.4 Condition of the casting 7.3.5 Mass of the casting 7.3.6 - Additional requirements regarding the condition of the casting In order to eliminate leaks in castings it is possible with the approval of the purchaser to use impregnation procedures. The impregnation medium and meth

34、od, maximum permitted size of discontinuities and retest procedures shall be agreed between the manufacturer and the purchaser. If applicable, density evaluation by weight measurements in air and water to agreed criteria shall be used to estimate the soundness of the casting. 8 Testing and documents

35、 on material testing 8.1 General 8.2 inspection and testing See EN 1559-1, EN 1774 and EN 12844. 8.3 Test unit sampling 8.3.1 Formation of test units 8.3.2 Size of test units 8.3.3 Inspection frequency 8.4 Samples See EN 1559-1, EN 1774 and EN 12844. 8.5 Test methods See EN 1559-1, EN 1774 and EN 12

36、844. 8.6 Invalidation of tests 8.7 Retests 8.7.1 General Page 6 EN 1559-6 : 1998 8.7.2 Individual values (Non-sequential tests) EN 1559-1 shall apply with the following addition: If there is a disagreement between the manufacturer and the purchaser on the chemical composition of a test unit the manu

37、facturer shall recheck the chemical composition on the original test piece, whenever possible. If the disagreement persists a referee analysis shall be carried out by a mutually acceptable laboratory. 8.7.3 I Sequential tests 8.8 Sorting and reprocessing 9 Marking 10 I Packaging and surface protection 11 Complaints