DIN EN 14316-1-2004 en 3171 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1 Specification for bonded and .pdf

《DIN EN 14316-1-2004 en 3171 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1 Specification for bonded and .pdf》由会员分享，可在线阅读，更多相关《DIN EN 14316-1-2004 en 3171 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1 Specification for bonded and .pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM November 2004DIN EN 14316-1 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 12 www.d

2、in.de www.beuth.de04.05 9608555Document comprises 27 pages.Thermal insulation products for buildings In-situ thermal insulation formed from expanded perlite (EP) productsPart 1: Specication for bonded and loose-ll products before installationEnglish version of DIN EN 14316-1Wrmedmmstoffe fr Gebude A

3、n der Verwendungsstelle hergestellte Wrmedmmung aus Produkten mit expandiertem Perlite (EP) Teil 1: Spezikation fr gebundene und Schttdmmstoffe vor dem EinbauA comma is used as the decimal marker. National forewordThis standard has been prepared by CEN/TC 88 Thermal insulating materials and products

4、 (Secretariat: Germany).The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee 00.88.00 Wrmedmmstoffe.It should be noted that, in Germany, CE conformity marking of construction products will b

5、e permitted once this standard has been listed in the German Federal Law Gazette.This European Standard is part of a series of standards dealing with thermal insulation products for build-ings within the scope of the EC Directive on the approximation of the laws, regulations and administrative provi

6、sions of the Member States relating to construction products.It should be noted that not all of the DIN Standards dealing with thermal insulation products for buildings need yet be withdrawn. This is in keeping with resolution C 88/98 taken by CEN/BT, which states that where packages of EN Standards

7、 are concerned, it shall be permitted for the relevant national standards to remain valid for longer periods than usual, until the EN package has been published in its entirety.In the case at hand, all of the relevant EN Standards have not yet been published, and CEN/TC 88 has there-fore decided to

8、extend the period of validity for relevant national standards until the end of February 2005.ICS 91.100.60!,_xZ“English versionICS 91.100.60Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung 2004. C

9、EN All rights of exploitation in any form and by any means reserved worldwide for CEN national members.Ref. No. EN 14316-1 : 2004 EProduits isolants thermiques pour le btiment Isolation thermique forme en place base de granulats lgers de Perlite expanse (EP) Partie 1: Spcication de produits lis et e

10、n vrac avant la mise en uvreWrmedmmstoffe fr Gebude An der Verwendungsstelle hergestellte Wrmedmmung aus Produkten mit expandiertem Perlite (EP) Teil 1: Spezikation fr gebundene und Schttdmmstoffe vor dem EinbauThis European Standard was approved by CEN on 2004-06-10.CEN members are bound to comply

11、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Cent

12、re or to any CEN member.The European Standards exist in three ofcial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notied to the Management Centre has the same status as the ofcial versions.C

13、EN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Swit

14、zerland, and the United Kingdom.EN 14316-1August 2004Thermal insulation products for buildings In-situ thermal insulation formed from expanded perlite (EP) productsPart 1: Specication for bonded and loose-ll products before installationPage 2 EN 14316-1 : 2004Page 3 EN 14316-1 : 2004Page 4 EN 14316-

15、1 : 2004Page 5 EN 14316-1 : 2004Page 6 EN 14316-1 : 2004Page 7 EN 14316-1 : 2004Page 8 EN 14316-1 : 2004Page 9 EN 14316-1 : 2004Page 10 EN 14316-1 : 2004Page 11 EN 14316-1 : 2004Page 12 EN 14316-1 : 2004Page 13 EN 14316-1 : 2004Page 14 EN 14316-1 : 2004Page 15 EN 14316-1 : 2004Page 16 EN 14316-1 : 2004Page 17 EN 14316-1 : 2004Page 18 EN 14316-1 : 2004Page 19 EN 14316-1 : 2004Page 20 EN 14316-1 : 2004Page 21 EN 14316-1 : 2004Page 22 EN 14316-1 : 2004Page 23 EN 14316-1 : 2004Page 24 EN 14316-1 : 2004Page 25 EN 14316-1 : 2004Page 26 EN 14316-1 : 2004