DIN EN 12790-2009 Child use and care articles - Reclined cradles English version of DIN EN 12790 2009-07《儿童使用和保育用品 摇篮 DIN EN 12790 2009-07的英文版本》.pdf

《DIN EN 12790-2009 Child use and care articles - Reclined cradles English version of DIN EN 12790 2009-07《儿童使用和保育用品 摇篮 DIN EN 12790 2009-07的英文版本》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12790-2009 Child use and care articles - Reclined cradles English version of DIN EN 12790 2009-07《儿童使用和保育用品 摇篮 DIN EN 12790 2009-07的英文版本》.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、July 2009DEUTSCHE NORM English price group 15No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.190!$Xl“1537357www.din

2、.deDDIN EN 12790Child use and care articles Reclined cradlesEnglish version of DIN EN 12790:2009-07Artikel fr Suglinge und Kleinkinder KinderliegesitzeEnglische Fassung DIN EN 12790:2009-07SupersedesDIN EN 12790:2003-01www.beuth.deDocument comprises pages35DIN EN 12790:2009-07 Start of validity This

3、 standard takes effect on 1 July 2009. National foreword This standard has been prepared by Technical Committee CEN/TC 252 “Child use and care articles” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Gebrauchstauglichkeit und Dienstleist

4、ungen (Performance Capability and Services Standards Committee), Technical Committee NA 095-05-03 AA Artikel fr Suglinge und Kleinkinder Sitzen, Pflegen, Schtzen, Liegen und Transportieren. Amendments This standard differs from DIN EN 12790:2003-01 as follows: a) The standard has been editorially re

5、vised. b) The age limit up to six months has been deleted from the scope of this standard, and reference has been made to the relevant European standards that apply if a reclined cradle has several functions or can be converted into another function (e.g. that of a swing). c) Clause 3 “Terms and def

6、initions” has been revised. d) The specification for a particular protected volume has been deleted, and the requirements apply now to all openings and moving parts. e) Now the requirements and the testing of locking mechanisms for folding systems and reclining systems are dealt with in subclause 5.

7、8 and subclause 5.9, respectively. f) Subclause 5.2 “Openings within the protected volume” has been revised and renamed as “Finger entrapment”. g) A torque test (6.4.2) has been added for the assessment of small parts. h) Further requirements and tests have been introduced (locking mechanisms for ca

8、rrying handles (5.11), incomplete deployment of the carrying handles (5.11.3), durability (5.14) and strength of carrying handles locking mechanisms (5.15) and reclined cradle tipping resistance test (6.9, 6.10). Previous editions DIN EN 12790: 2003-01 2 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NO

9、RMEN 12790March 2009ICS 97.190 Supersedes EN 12790:2002 English VersionChild use and care articles - Reclined cradlesArticles de puriculture - Transats Artikel fr die Suglinge und Kleinkinder - KinderliegesitzeThis European Standard was approved by CEN on 24 January 2009.CEN members are bound to com

10、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Manageme

11、nt Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theoff

12、icial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slov

13、enia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN nation

14、al Members.Ref. No. EN 12790:2009: EEN 12790:2009 (E) 2 Contents Foreword 41 Scope 52 Normative references 53 Terms and definitions . 54 Properties of materials 74.1 Chemical properties 74.2 Flammability . 75 Construction . 85.1 Shrinkage 85.2 Finger entrapment . 85.3 Moving parts . 85.4 Edges, poin

15、ts and corners 85.5 Small parts 85.6 Cords, ribbons and parts used as ties 85.7 Springs 85.8 Locking mechanism(s) for folding system . 95.8.1 General 95.8.2 Incomplete deployment . 95.8.3 Unintentional release of locking mechanism(s) . 95.9 Reclining system . 95.10 Angle and height of seat unit . 95

16、.11 Locking mechanism(s) for carrying handle(s) 105.11.1 General 105.11.2 Locking mechanism(s) 105.11.3 Incomplete deployment of the carrying handle(s) . 105.12 Stability . 105.13 Static strength 105.14 Durability of reclined cradles with carrying handle(s) . 105.15 Strength of carrying handle(s) lo

17、cking mechanism(s) 105.16 Slippage of the reclined cradle . 115.17 Restraint system 115.17.1 General 115.17.2 Strength of the restraint system 115.17.3 Slippage of the restraint system 115.18 Marking . 116 Test methods 116.1 General 116.2 Test equipment 126.2.1 Test mass A 126.2.2 Test mass B 136.2.

18、3 Small parts cylinder . 146.2.4 Feeler gauge . 156.2.5 Test equipment for handle strength test . 156.2.6 Test probes for finger entrapment . 176.2.7 Test equipment for handle locking mechanism strength test 176.2.8 Test surface for the stability test . 186.2.9 Measurement device for the angle . 196

19、.3 Test method for finger entrapment 196.4 Test method for small parts 206.4.1 Assessment of childs ability to grip components . 206.4.2 Torque test . 20DIN EN 12790:2009-07 EN 12790:2009 (E) 3 6.4.3 Tensile test . 206.5 Test method for springs 206.6 Test method for locking mechanisms . 216.6.1 Test

20、 method for incomplete deployment 216.6.2 Test method for unintentional release of locking mechanisms . 216.6.3 Test method for the durability of the locking mechanisms 216.7 Test method for the reclining system 216.8 Test method for the measurement of angles and height of seat unit 216.8.1 General

21、216.8.2 Test method for the measurement of angles 226.8.3 Test method for the measurement of height H . 236.9 Reclined cradle tipping resistance test . 236.10 Reclined cradle tipping resistance test from the floor 246.11 Test method for stability . 256.12 Test method for static strength 266.13 Test

22、method for durability of reclined cradles with carrying handle(s) . 266.14 Handle locking mechanism(s) strength test . 266.15 Test method for slippage of the reclined cradle 286.16 Test method for the strength of the restraint system 286.17 Test method for the slippage of the restraint system 296.18

23、 Durability of marking . 297 Product information 297.1 General 297.2 Marking of the product 297.3 Purchase information 307.4 Instructions for use . 308 Non-permeable packaging 31Annex A (informative) A-deviations . 32Annex B (informative) Relevant standards and recommendations for multi purpose recl

24、ined cradles 33DIN EN 12790:2009-07 EN 12790:2009 (E) 4 Foreword This document (EN 12790:2009) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either

25、 by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN an

26、d/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12790:2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

27、 Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12790:

28、2009-07 EN 12790:2009 (E) 5 1 Scope This standard specifies safety requirements and the corresponding test methods for fixed or folding reclined cradles intended for children up to a weight of 9 kg or who are unable to sit up unaided. This standard applies also to car seats complying with ECE 44 tha

29、t can be used as reclined cradles according to manufacturers instructions. This standard does not apply to reclined cradles when used as swings. If a reclined cradle has several functions or can be converted into another function the relevant European standards apply to it (see Annex B). 2 Normative

30、 references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1, Safety of toys Part 1: Mecha

31、nical and physical properties EN 71-3, Safety of toys Part 3: Migration of certain elements EN 1103, Textiles Fabrics for apparel Detailed procedure to determine the burning behaviour EN ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO

32、 868:2003) ISO 48, Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) ISO 7619-1, Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) ISO 7619-2, Rubber, vulcanized or thermoplastic Det

33、ermination of indentation hardness Part 2: IRHD pocket meter method 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1 reclined cradle article intended to accommodate a child in a reclined position NOTE Reclined cradles may be static, rocking or

34、 bouncing and may have an adjustable backrest and/or seat. 3.1.1 static reclined cradle article not intended to bounce or rock 3.1.2 rocking reclined cradle article intended to allow the child to rock DIN EN 12790:2009-07 EN 12790:2009 (E) 6 3.1.3 bouncing reclined cradle article intended to allow t

35、he child to bounce due to the flexibility of the frame or any other mechanical means 3.2 restraint system system to restrain the child within the reclined cradle 3.3 crotch restraint device designed to pass between the childs legs to prevent the child from sliding forward 3.4 carrying handle compone

36、nt to enable the reclined cradle with the child in it to be carried by hand 3.5 junction line intersection of the seat and the backrest NOTE 1 See Figure 1a). Key LL Junction line Figure 1a) Junction line NOTE 2 When the seat unit is in the form of a hammock, then a theoretical junction line, “LL”,

37、is determined as shown in Figure 1b). For these products the junction line will vary when the backrest is adjusted in different positions. DIN EN 12790:2009-07 EN 12790:2009 (E) 7 Key LL Junction line CL Vertical projection of C on the hammock Figure 1b) Junction line for reclined cradles in form of

38、 a hammock 4 Properties of materials 4.1 Chemical properties Surfaces of parts located within the inner and upper surface that support the child shall be made using materials which in their soluble state have a metal content not exceeding the following values: Antimony: 60 mg/kg; Arsenic: 25 mg/kg;

39、Barium: 1 000 mg/kg; Cadmium: 75 mg/kg; Chromium: 60 mg/kg; Lead: 90 mg/kg; Mercury: 60 mg/kg; Selenium: 500 mg/kg. The test procedure is defined in EN 71-3. Where a surface is coated with a multi-layer of paint or similar coating, the test sample shall not include any of the base material. 4.2 Flam

40、mability There shall be no parts of the reclined cradle which can give rise to surface flash, when tested in accordance with EN 1103. DIN EN 12790:2009-07 EN 12790:2009 (E) 8 5 Construction 5.1 Shrinkage After cleaning and drying twice in accordance with the manufacturers instructions, any resulting

41、 shrinkage in the fabric covering materials shall not prevent removable fabrics from being refitted. 5.2 Finger entrapment When tested in accordance with 6.3 there shall be no holes, openings or gaps greater than 7 mm and less than 12 mm unless the depth of penetration of the appropriate probe is le

42、ss than 10 mm on the inner and upper surface which supports the child. The test shall be carried out with the product in any intended position of use. Restraint systems are excluded from this requirement. 5.3 Moving parts To avoid the risk of shearing and crushing once the reclined cradle is assembl

43、ed for normal use the distance between two parts which move relative to each other shall be less than 5 mm or more than 12 mm throughout the entire movement. Moving parts can arise from: a) the movement of the reclined cradle; b) the movement of the body weight or action of the child using the recli

44、ned cradle; c) a powered mechanism. Locking mechanisms and the base of the article and its functional parts for rocking and bouncing are excluded from this requirement. 5.4 Edges, points and corners All accessible edges, corners and protruding parts on the reclined cradles inner and upper surface wh

45、ich supports the child shall be rounded or chamfered and free from burrs. All surfaces shall be free from burrs and sharp edges. 5.5 Small parts When tested in accordance with 6.4, any part that can be detached shall not fit wholly within the small parts cylinder. Parts intended to be removed shall

46、not fit wholly within the small parts cylinder. 5.6 Cords, ribbons and parts used as ties Cords, ribbons and parts used as ties excluding restraint system shall have a maximum free length of 220 mm when stretched by a force of 25 N. 5.7 Springs If the reclined cradle is fitted with springs, a protec

47、tion is required when the space between two helical coils can become equal to or greater than 3 mm and smaller than 12 mm, when tested in accordance with 6.5. DIN EN 12790:2009-07 EN 12790:2009 (E) 9 5.8 Locking mechanism(s) for folding system 5.8.1 General Reclined cradles which may be folded for s

48、torage or transportation purposes shall be fitted with locking mechanism(s) for the folding system. Locking mechanism(s) is required to prevent a reclined cradle folding whilst the child is in the cradle and also during the process of a child being put in and taken out of the cradle. 5.8.2 Incomplete deployment To avoid the hazard due to incomplete deployment, at least one locking mechanism shall engage automatically when the product is deployed for use in accordance with the manufacturers instructions f