DIN EN 1264-2-2013 Water based surface embedded heating and cooling systems - Part 2 Floor heating Prove methods for the determination of the thermal output using calculation and t.pdf

《DIN EN 1264-2-2013 Water based surface embedded heating and cooling systems - Part 2 Floor heating Prove methods for the determination of the thermal output using calculation and t.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1264-2-2013 Water based surface embedded heating and cooling systems - Part 2 Floor heating Prove methods for the determination of the thermal output using calculation and t.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、March 2013 Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.140.10!$rV“1957951www.din.deDDIN EN 1264-2Water based surface embedded heating and cooling systems Part 2: Floor heating: Prove methods for the determination of thethermal output using calculation and test methods;English version EN 1264-2:2008+A1:2012,English translation of DIN EN 1264-2:2013-03

3、Raumflchenintegrierte Heiz- und Khlsysteme mit Wasserdurchstrmung Teil 2: Fubodenheizung: Prfverfahren fr die Bestimmung der Wrmeleistung unterBenutzung von Berechnungsmethoden und experimentellen Methoden;Englische Fassung EN 1264-2:2008+A1:2012,Englische bersetzung von DIN EN 1264-2:2013-03Systmes

4、 de surfaces chauffantes et rafrachissantes hydrauliques intgres Partie 2: Chauffage par le sol: Mthodes de dmonstration pour la dtermination delmission thermique utilisant des mthodes par le calcul et laide de mthodes dessai;Version anglaise EN 1264-2:2008+A1:2012,Traduction anglaise de DIN EN 1264

5、-2:2013-03SupersedesDIN EN 1264-2:2009-01www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 46 pages 02.13 DIN EN 1264-2:2013-03 2 A comma is used as the decimal marker. National foreword This document (EN 1264-2:2008+A1:2012) has been pre

6、pared by Technical Committee CEN/TC 130 “Space heating appliances without integral heat sources”, Working Committee WG 9 “Floor heating Systems and components” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Heiz- und Raumluft-technik (Hea

7、ting and Ventilation Technology Standards Committee), Working Committee NA 041-01-69-15 AK Integrierte Flchenheizungen und -khlungen (SpA CEN/TC 130/WG 9). Amendments This standard differs from DIN EN 1264-2:2009-01 as follows: a) Annex C “Influence of the heat exchange coefficient inside the pipe o

8、n the specific thermal output” has been added; b) normative references have been updated; Previous editions DIN 4725-2: 1992-05 DIN EN 1264-2: 1997-11, 2009-01 DIN 4725-200: 2001-03 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1264-2:2008+A1 November 2012 ICS 91.140.10 Supersedes EN 1264-2:2

9、008English Version Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods Systmes de surfaces chauffantes et rafrachissantes hydrauliques intgres - Partie 2 : Chauffage par le sol:

10、 Mthodes de dmonstration pour la dtermination de lmission thermique utilisant des mthodes par le calcul et laide de mthodes dessai Raumflchenintegrierte Heiz- und Khlsysteme mit Wasserdurchstrmung - Teil 2: Fubodenheizung: Prfverfahren fr die Bestimmung der Wrmeleistung unter Benutzung von Berechnun

11、gsmethoden und experimentellen Methoden This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 1 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa

12、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English,

13、 French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulg

14、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu

15、rkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN

16、 1264-2:2008+A1:2012: EEN 1264-2:2008+A1:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Definitions and symbols .54 Thermal boundary conditions 55 Documents for testing .66 Calculation of the specific thermal output (characteristic curves and limit curves) 76.1

17、General approach (see 2, 4) .76.2 Systems with pipes installed inside the screed (type A and type C) .86.3 Systems with pipes installed below the screed or timber floor (type B) .96.4 Systems with surface elements (plane section systems, type D) . 116.5 Limits of the specific thermal output 116.6 In

18、fluence of pipe material, pipe wall thickness and pipe sheathing on the specific thermal output . 136.7 Heat conductivity of screed with inserts 147 Heat conductivity of the materials 148 Downward heat loss . 149 Test procedure for the determination of the thermal output of systems that cannot be ca

19、lculated in accordance with Clause 6 . 1510 Test procedure for the determination of the effective thermal resistance of carpets . 1811 Prove report. 1912 Prove system. 2012.1 General . 2012.2 Master samples . 2012.3 Verification of test equipments . 2112.4 Determination of the values smand M,s(qN,M,

20、s, qG,M,s(R;B=0,15), R,B,M,s) of primary master samples 2112.5 Verification of software 21Annex A (normative) Figures and tables . 23Annex B (informative) Test procedure for the determination of parameters for application in EN 15377-1:2008 Annex C 40Annex C (informative) !Influence of the heat exch

21、ange coefficient inside the pipe on the specific thermal output“ . 43Bibliography . 44DIN EN 1264-2:2013-03EN 1264-2:2008+A1:2012 (E) 3 Foreword This document (EN 1264-2:2008+A1:2012) has been prepared by Technical Committee CEN/TC 130 “Space heating appliances without integral heat sources”, the se

22、cretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to

23、the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 1 October 2012. This document !supersedes EN 1264-2:20

24、08“. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard, Water based surface embedded heating and cooling systems, consists of the following parts: Part 1: Definitions and symbols; Part 2: Floor heating: Prove methods for the

25、determination of the thermal output using calculation and test methods; Part 3: Dimensioning; Part 4: Installation; Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls Determination of the thermal output. According to the CEN/CENELEC Internal Regulations, the national standar

26、ds organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe

27、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1264-2:2013-03EN 1264-2:2008+A1:2012 (E) 4 Introduction This European Standard is based on the realisation that in the field of commercial trade, the t

28、hermal output of heating and cooling systems represents the basis of rating. In order to be able to evaluate and compare different heating and/or cooling systems, it is, therefore, necessary to refer to values determined using one single, unambiguously defined method. The basis for doing so are the

29、prove methods for the determination of the thermal output of floor heating systems specified in Part 2 of this European Standard. In analogy to the European Standard EN 442-2 (Radiators and convectors Part 2: Test methods and rating), these prove methods provide characteristic partial load curves un

30、der defined boundary conditions as well as the characteristic output of the system represented by the standard thermal output together with the associated standard temperature difference between the heating medium and the room temperature. DIN EN 1264-2:2013-03EN 1264-2:2008+A1:2012 (E) 5 1 Scope Th

31、is European Standard specifies the boundary conditions and the prove methods for the determination of the thermal output of hot water floor heating systems as a function of the temperature difference between the heating medium and the room temperature. This standard shall be applied to commercial tr

32、ade and practical engineering if proved and certifiable values of the thermal output shall be used. This European Standard applies to heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. This Part of this European Standard applies to hot water fl

33、oor heating systems. Applying of Part 5 of this European Standard requires the prior use of this Part of this European Standard. Part 5 of this European Standard deals with the conversion of the thermal output of floor heating systems determined in Part 2 into the thermal output of heating surfaces

34、embedded in walls and ceilings as well as into the thermal output of cooling surfaces embedded in floors, walls and ceilings. The thermal output is proved by a calculation method (Clause 6) and by a test method (Clause 9). The calculation method is applicable to systems corresponding to the definiti

35、ons in EN 1264-1 (type A, type B, type C, type D). For systems not corresponding to these definitions, the test method shall be used. The calculation method and the test method are consistent with each other and provide correlating and adequate prove results. The prove results, expressed depending o

36、n further parameters, are the standard specific thermal output and the associated standard temperature difference between the heating medium and the room temperature as well as fields of characteristic curves showing the relationship between the specific thermal output and the temperature difference

37、 between the heating medium and the room. 2 Normative references !The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of t

38、he referenced document (including any amendments) applies. EN 1264-1:2011, Water based surface embedded heating and cooling systems Part 1: Definitions and symbols EN 1264-3:2009, Water based surface embedded heating and cooling systems Part 3: Dimensioning“ 3 Definitions and symbols For the purpose

39、s of this document, the terms and definitions given in !EN 1264-1:2011“ apply. 4 Thermal boundary conditions A floor heating surface with a given average surface temperature exchanges the same thermal output in any room with the same indoor room temperature (standard indoor room temperature i). It i

40、s, therefore, possible to give a basic characteristic curve of the relationship between specific thermal output and average surface temperature that is independent of the heating system and applicable to all floor heating surfaces (including those having peripheral areas with greater heat emissions)

41、 (see Figure A.1). In contrast, every floor heating system has its own maximum permissible specific thermal output, the limit specific thermal output, qG. This output is calculated for an ambient (standard) indoor room temperature DIN EN 1264-2:2013-03EN 1264-2:2008+A1:2012 (E) 6 i= 20 C. The other

42、condition is the maximum surface temperature F, max= 29 C1)at temperature drop between supply and return of the heating medium = 0 K. The maximum specific thermal output for the peripheral area will be achieved at a maximum surface temperature F, max= 35 C2)and = 0 K. For the calculation and for the

43、 test procedure, the centre of the heating surface is used as the reference point for F, max, regardless of system type. The average surface temperature F, m, determining the specific thermal output (see basic characteristic curve) is linked with the maximum surface temperature. In this context, F,

44、m4 000 kg/(h m). There is no lateral heat flow. The heat-conducting layer of the floor heating system is thermally decoupled by thermal insulation from the structural base of the building. NOTE The aforementioned last condition does not concern the test procedure of Clause 9. 5 Documents for testing

45、 The system suppliers documents are taken as the basis for the determination of the thermal output. The following documents shall be provided: Installation drawing (section) of the floor heating system, covering two pipe spacing, including the peripheral area and giving information on the materials

46、used (if necessary, the test results regarding the heat conductivity values of the materials shall be provided). Technical documentation of the system. This information shall contain any details necessary for the calculation of the construction customary on site. It shall be submitted to the install

47、er in the same form. With a member of the testing body present, a demonstration surface of approximately 2 m 2 m is constructed to represent the actual construction used on site. 1) National regulations may limit this temperature to a lower value. 2) Some floor covering materials may require lower t

48、emperatures. DIN EN 1264-2:2013-03EN 1264-2:2008+A1:2012 (E) 7 6 Calculation of the specific thermal output (characteristic curves and limit curves) 6.1 General approach (see 2, 4) The specific thermal output q at the surface of a floor is determined by the following parameters: Pipe spacing T; Thickness suand heat conductivity Eof the layer ab