CGSB 43 123-2010-CGSB-2010 Aerosol Containers and Gas Cartridges for Transport of Dangerous Goods《危险品运输用空气溶胶容器和续气筒》.pdf

《CGSB 43 123-2010-CGSB-2010 Aerosol Containers and Gas Cartridges for Transport of Dangerous Goods《危险品运输用空气溶胶容器和续气筒》.pdf》由会员分享，可在线阅读，更多相关《CGSB 43 123-2010-CGSB-2010 Aerosol Containers and Gas Cartridges for Transport of Dangerous Goods《危险品运输用空气溶胶容器和续气筒》.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、CGSB43.1232010Supersedes CAN/CGSB-43.123-M86Aerosol Containers and Gas Cartridges for Transport of Dangerous GoodsICS 55.020CGSB StandardCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-

2、,-The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards com

3、mittees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any

4、 given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria an

5、d procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards a

6、nd CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improvement,

7、which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and orderi

8、ng instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CGSB products and services at our Web site www.ongc-cgsb.gc.ca. Although the intended primary application of this standard is stated in its S

9、cope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document

10、does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. C

11、GSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held respo

12、nsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Standard

13、s Division Canadian General Standards Board Gatineau, Canada K1A 1G6 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr

14、.cgsb-ongcpwgsc.gc.ca on the Web www.ongc-cgsb.gc.ca Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Canadian General Standards Board CGSB43.1232010 Supersedes CAN/CGSB-43.123-M86Aero

15、Sol ConTAinerS AnD GAS CArTriDGeS for TrAnSporT of DAnGerouS GooDSnATionAl STAnDArD of CAnADA CAn/CGSB3.142006prepared by the Canadian General Standards BoardPublished June 2010 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented

16、by the Minister of Public Works and Government Services, the Minister responsible for the Canadian General Standards Board, (2010). No part of this publication may be reproduced in any form without the prior permission of the publisher.Copyright Canadian General Standards Board Provided by IHS under

17、 license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAnADiAn GenerAl STAnDArDS BoArDCoMMiTTee on AeroSol ConTAinerS AnD GAS CArTriDGeS for THe TrAnSporTATion of DAnGerouS GooDS(Voting membership at date of approval)ChairHuzar, J.1Consumers Council of

18、Canadaproducer CategoryBlum, J. Ball CorporationChau, F. K-G Packaging Inc.Evangelista, M. Crown Cork and SealHenry, R. ITW Sextonuser Category Rathlou, S. S. C. Johnson and Son Inc.Rogers, J. MG ChemicalsSchiemann, H. Proctor and Gamble Service GmbH General interest CategoryFox, M. Chemical Acciden

19、t Reconstruction Services Inc.regulatory CategoryNoccey, N. Transport CanadaSecretary (nonvoting)Long, R. Canadian General Standards Board1 UserAcknowledgment is made for the translation of this Canadian General Standards Board standard by the Translation Bureau of Public Works and Government Servic

20、es Canada.CGSB43.1232010Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB-43.123-2010(E) CGSB 2010 All rights reserved i Contents Page Introduction.ii 1 Scope1 1.1 Organization and

21、 Content.1 1.2 Application .1 1.3 Additional Requirements1 2 Normative References.2 3 Terms and Definitions.2 4 Design, Construction and Testing.4 4.1 Design and Construction of Metal Containers (TC-2P, TC-2Q and TC-2R) .4 4.2 Testing of Metal Containers (TC-2P, TC-2Q and TC-2R) .5 4.3 Design and Co

22、nstruction of Plastic Aerosol Containers (TC-2S) 6 4.4 Testing of Plastic Aerosol Containers (TC-2S).7 5 Marking.8 6 Quality Management System8 6.1 Application .8 6.2 Management Commitment9 7 Transport Canada Registration9 7.1 General .9 7.2 Initial Registration .9 7.3 Renewal of Certificate of Regi

23、stration 10 8 Selection and Use of Aerosol Containers and Gas Cartridges 10 8.1 UN1950 Aerosol Containers and UN2037 Gas Cartridges 10 9 Transport of Containers Intended for Disposal from a Collection Facility13 10 Notes (Informative)13 10.1 Related Publications .13 Copyright Canadian General Standa

24、rds Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB-43.123-2010(E) ii CGSB 2010 All rights reserved Introduction This is the second edition of CGSB-43.123, Aerosol Containers and Gas Cartridges for Transport of Dang

25、erous Goods. It supersedes the previous edition published in 1986, Containers, Metal, Aerosol (TC-2P, TC-2Q). This standard is intended for incorporation by reference into the Transportation of Dangerous Goods Regulations (TDG Regulations). Where there are differences between the requirements of the

26、 TDG Regulations and this standard, the TDG Regulations prevail, unless specified otherwise, to the extent of the difference. Until the Regulations are amended to adopt this edition of the standard, an earlier edition may be the one legally in effect in Canada. The standard contains requirements for

27、 the design, manufacture and testing of TC specification aerosol containers and gas cartridges; the quality management system for manufacturers of aerosol containers and gas cartridges; the Transport Canada registration requirements for aerosol container and gas cartridge manufacturers; the selectio

28、n and use of containers for the handling, offering for transport and transport of UN1950, aerosols and UN2037, gas cartridges, in Canada; and the transport of aerosol containers and gas cartridges intended for disposal from a collection facility. The CGSB Committee on Aerosol Containers and Gas Cart

29、ridges for the Transportation of Dangerous Goods is comprised of members having responsibility and expertise in design, manufacturing, testing, use and regulation of aerosol containers and gas cartridges. The Committee considers this standard, developed by consensus, to be practical, current with re

30、spect to technology and industry practices, useful and acceptable to all interested parties. In developing this standard, the Committee considered the following publications: UN Recommendations on the Transport of Dangerous Goods, Model Regulations, 15th revised edition, published in 2007 Transporta

31、tion of Dangerous Goods Act and Regulations Title 49 of the U.S. Code of Federal Regulations (49 CFR) BS 5597:1991 Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity Technical Instructions for the Safe Transport of Dangerous Goods by Air, 2009-2010 edition, published

32、 by the International Civil Aviation Organization (ICAO) CSA B340-08 Selection and Use of Cylinders, Spheres, Tubes, and Other Containers for the Transportation of Dangerous Goods, Class 2. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproductio

33、n or networking permitted without license from IHS-,-,-CGSB-43.123-2010(E) CGSB 2010 All rights reserved iii Changes in the second edition include the following: Revised definitions and the addition of definitions Addition of a new specification for metal aerosol containers (TC-2R) Addition of a new

34、 specification for plastic aerosol containers (TC-2S) Addition of requirements for gas cartridges Addition of quality system requirements for manufacturers of aerosol containers and gas cartridges Revised requirements for Transport Canada registration Addition of selection and use requirements for a

35、erosol containers and gas cartridges and Addition of requirements for the transport of aerosol containers and gas cartridges intended for disposal from a collection facility. It is the intent of the CGSB Committee to maintain this standard in a manner that provides the maximum degree of harmonizatio

36、n with the UN Recommendations while meeting the needs of Canada. This standard was prepared by the CGSB Committee on Aerosol Containers and Gas Cartridges for the Transportation of Dangerous Goods and has been formally approved by the Committee. Copyright Canadian General Standards Board Provided by

37、 IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB-43.123-2010(E)CGSB 2010 All rights reserved 1Aerosol Containers and Gas Cartridges for Transport of Dangerous Goods 1 Scope 1.1 Organization and Content This standard sets out the requ

38、irements for the design, manufacture, testing and inspection of non-refillable containers with a capacity of not more than 1 L and their selection and use for the handling, offering for transport and transport of UN1950, aerosols and UN2037, gas cartridges, in Canada. This standard also provides req

39、uirements for a quality management system and Transport Canada registration. This standard consists of six main sets of requirements. Sections 1 through 3 specify general requirements, normative references and definitions. Sections 4 and 5 specify the requirements for the design, construction, testi

40、ng and marking of aerosol containers and gas cartridges for use in Canada. Section 6 specifies the quality management system requirements for manufacturers of aerosol containers and gas cartridges. Section 7 specifies the Transport Canada registration requirements for manufacturers of aerosol contai

41、ners and gas cartridges. Section 8 specifies the requirements for the selection and use of aerosol containers and gas cartridges in Canada. Section 9 specifies the requirements for the transport of containers intended for disposal from a collection facility. 1.2 Application The standard applies to a

42、erosol containers and gas cartridges with a capacity equal to or less than 1 L and an inside diameter equal to or less than 76 mm. 1.3 Additional Requirements 1.3.1 The Transportation of Dangerous Goods Act, 1992 and the Transportation of Dangerous Goods Regulations may call for additional requireme

43、nts regarding the design, construction, selection and use, or testing of aerosol containers and gas cartridges. 1.3.2 Quantities and dimensions used in this standard are given in metric units. 1.3.3 Pressures of all kinds relating to containers (such as test pressure, internal pressure, pressure-rel

44、ief device set-to-discharge pressure) are indicated in gauge pressure unless specifically noted otherwise. 1.3.4 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the

45、safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. 1.3.5 This standard is intended for c

46、onformity assessment. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB-43.123-2010(E) CGSB 2010 All rights reserved 2 2 Normative References The following normative documents cont

47、ain provisions that, through reference in this text, constitute provisions of this CGSB standard. The referenced documents may be obtained from the sources noted below. An undated reference is to the latest edition or revision of the reference or document in question, unless otherwise specified by t

48、he authority applying this standard. A dated reference is to the specified revision or edition of the reference or document in question. However, parties to agreements based on this CGSB standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. 2.1 Transport Canada (TC) Transportation of Dangerous Goods Act, 1992, Chapter 34, Statutes of Canada (including amendments) Transportation of Dangerous Goods Regulations (including amendments). 2.1.1 Source The above may be obtained from Transport Canada, Web