CAN CSA-Z243 300-1989 Electronic Data Interchange for Administration Commerce and Transport (EDIFACT) - Application Level Syntax Rules (First Edition).pdf

《CAN CSA-Z243 300-1989 Electronic Data Interchange for Administration Commerce and Transport (EDIFACT) - Application Level Syntax Rules (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-Z243 300-1989 Electronic Data Interchange for Administration Commerce and Transport (EDIFACT) - Application Level Syntax Rules (First Edition).pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、CAN/CSA-Z24 3.300-89 CAN/CGSB-200.10-89 (Reaffirmed 1996) A National Standard of Canada Electronic Data Interchange for Administration, Commerce, and Transport E EDIFACT)-Application Level Syntax Rules (IS0 973511388) Reviewed by Canadian Standards Association and Canadian General Standards Board Ap

2、proved by Standards Council of Canada lSSN 031 7-5669 Published in August 1989 by Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario, Canada M9W 1R3 and Canadian General Standards Board Ottawa, Ontario, Canada KIA 1G6. - The Canadian Standards Association (CSA, under w

3、hose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activiti

4、es. CSA standards reflect a national consensus of producers and users-including manufac- turers, consumers, retailers, unions and income for CSAs standards development write to Canadian Standards Association professional organizations, and governmental activities. 178 Rexdale Boulevard agencies. The

5、 standards are used widely by industryand commerceandoftenadopted by municipal, provincial, and federal govern- mens in their regulations, particularfy in the fields of health, safety, building and con- struction, and the environment. Individuals, companies, and associations across Canada indicate t

6、heir support for CSAs standards development by volunteer- ing their time and skills to CZA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from wh

7、ich its Directors are chosen. Sustaining memberships represent a major source of In addition to its head office and laboratory complex in Rexdale (Toronto), CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Associa-

8、 tion has developed the necessary expertise to meet its corporate mission: “to provide Canadian standards and related activities for the benefit of the Canadian public, govern- ment, and business“. For further information on CSA services, The Association offers certification and testing services in

9、support of and as an extension to its standards development activities. To ensure the integrity of its certi- fication process, the Association regularly and continually audits and inspects products that bear the CSA Mark. Rexdale (Toronto), Ontario, Canada M9W 13 The Canadian General Standards Boar

10、d CGSBJ, under whose auspices this Standard has been developed, is a government agency within the Federal Department of Supply and Services. The CGSB is engaged in the pro- duction of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus pro

11、cess. The standards committees are com- posed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institurions, technical, professional and trade societies, and research and testing organiza- tions. Any given standard is develo

12、ped on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus process. The CGSB has been accredited by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offer

13、s as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, the CGSB produces standards to meet particular needs, in response to requests from a variety of sourc

14、es in both the public and private sectors. Both CGSB standards and national standards developed by the CGSB are developed in conformance with the policies described in the Policy Manual for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any

15、 time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always wefcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of stand

16、ards. An up-to-date listing of CGSB standards, including details on latest issues and amend- ments, and ordering instructions, will be found in the Catalogue of Standards and Qualified Products Lists which is published annually and is available without charge upon request. Although the intended prim

17、ary application of this Standard is stated in its Scope, it is important to note that it remains the respon- sibility of the users of the standard tojudge its suitability for their particular purpose. Many tests required by CGSB standards are inherently hazardous. The CGSB neither assumes nor accept

18、s any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. The CGSB takes no position respecting the validity of any patent rights asserted with any item connected with this Standard. Users of this Standard are expressly advised that determinat

19、ion of the validity of any such patent rights are entirely their own respon- si bi lity. Further information on the CGSB and its services and standards may be obtained from: The Secretary Canadian General Standards Board Ottawa, Canada K1A 1G6 The Standards Councif of Canada is the coordinating body

20、 of the National Standards System, a federation of independent, auto- nomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a mean

21、s of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and inter- national trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which

22、 has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose coflec- tive interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with r

23、elevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a signi- ficant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and proce

24、dures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsiblity of the accredited standards-writing organization. Those who have a need to apply standards are encouraged to use National Standards of Can

25、ada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the Standards Council of Canada 350 Sparks Stre

26、et Ottawa, Ontario KIP 6N7 Les Normes nationales du Canada sont disponibles en versions franqaise et anglaise Technical Editor: Managing Editor: Bernard Kelly (CSA) Paul V. Bates (CSA), W. Bruce Dodd (CGSB) Canadian Standards Association/Minister of Supply and Services Canada-1989 All rights reserve

27、d. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publishers. Contens Contents CGSB/CSA Joint Technical Committee on Electronic Data Interchange iv Preface vii 1. Scope I 2. Normative References 7 3. Defi

28、nitions 2 4. Syntax Levels 2 5. Character Sets 2 5.1 Level A Character Set 2 5.2 Level B Character Set 3 6. Structures 6.1 Interchange Structure 3 6.2 Order of Segments and Groups of Segments Within a Message 5 6.3 Segment Structure 5 6.4 Data Element Structure 5 7. Compressing 5 7.1 Exclusion of Se

29、gments 5 7.2 Exclusion of Data Elements by Omission 5 7.3 Exclusion of Data Elements by Truncation 6 7.4 Exclusion of Component Data Elements by Omission 6 7.5 Exclusion of Component Data Elements by Truncation 6 8. Repetition 6 8.1 Repetition of Segments 6 8.1.1 Explicit Indication of Repetition 6

30、8.1.2 Implicit Indication of Repetition 6 8.2 Repetition of Data Elements 7 9. Nesting of Segments 7 9.1 Explicit Indication of Nesting 7 9.2 Implicit Nesting Indication 9 10. Representation of Numeric Data Element Values 9 10.1 Decimal Mark 9 10+2 Triad Separator 9 10.3 Sign 9 Annexes A-Definitions

31、 70 B-Service Segments Specifications 73 C-Order of Segments and Groups of Segments Within a Message 79 Electronic Data Interchange for Administration, Commerce, and Transport ( EDIFACT-Application Level Syntax Rules August I989 CGSB/CSA Joint Technical Committee CGSB/CSA Joint Technical Committee o

32、n Electronic Data Interchange R. Lang V. Alexiou D. Balmer D. Barron D. Barton B. Beaudet J.E. Beriault G. Byrne A. Caputo M. Caruso R. Dexter AB. Donaldson D. Dudgeon R.C. Duff L. Dunning A.R. Elliott M. Fountain J. Glover D. Guilbault iv Stelco Incorporated, Hamilton, Ontario Canadian Bankers Asso

33、ciation, Toronto, Ontario Nepean, Ontario Stelco Incorporated, Hamilton, Ontario Supply and Services Canada, Hull, Quebec International Air Transport Assoc., Montreal, Quebec National Library of Canada, Ottawa, Ontario Dow Chemical Canada Incorporated, Sarnia, Ontario Sears Canada, Toronto, Ontario

34、Stelco Incorporated, Hamilton, Ontario Standards Council of Canada, Ottawa, Ontario A.B. Donaldson while the “information annex” is provided only for information. Standards that are technically equivalent to various National Standards of Canada. example, CAN/CSA-Z234.1, Canadian Metric Practice Guid

35、e, is based on and agrees entirely with the IS0 31 Series. IS0 2383-1 and IS0 2383-4 are equivalent to CAN3-2243.27.1 and CAN3-Z243.27.4, respectively; IS0 7498 is equivalent to Development work is under way within both IS0 and CClTT to specify more completeiy This Standard contains some terminology

36、 that is not customary in Canadian standards, Under the heading of Normative References, this Standard lists a number of International For CAN3-2243.100. Electronic Data Interchange for Administration, Commerce, and Transport (EDIFACTJ-Application Level Syntax Rules August 1989 Preface This joint CS

37、A/CGSB Standard has been approved as a National Standard of Canada by the Standards Council of Canada. International Standard” should be replaced by the words “this National Standard of Canada” . August 1989 Throughout this Standard, the words “this CAN/CY-Z243.300-89 . CAN/CGSB-200.10-89 August 198

38、9 INTERNATIONAL STANDARD IS0 9735 : 1988 (E) Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules Notes (CSA/CGSB): (1) See Preface for Canadian equivalents. (2) JTCIDl expects to submit the latest edition of the Trade Data Element Directo

39、ry for National Standard of Canada status in 1989. 1 scope This International Standard gives syntax rules for the preparation of messages to be interchanged between partners in the fields of ad ministration, commerce and transport. 2 Nonnative references The following standards contain provisions wh

40、ich, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibilit

41、y of applying the most recent editions of the standards listed below. Members of IEC and IS0 maintain registers of currently valid International Standards. I SO 3 1-0 : 1981, General principles concerning quanrities, units and symbols. IS0 646 : 1983, Information processing - IS0 7-bit coded charact

42、er set for information interchange. IS0 2382-1 : 1984, Data processing - Vocabulary - Part 07: Fundamental terms. IS0 2382-4 : 1987, Data processing - VocabuIary - Part 04: Organization of data. IS0 6523 : 1984, Rata interchange - Structures for the identification of organizations. IS0 6937-2 : 1983

43、, Information processing - Coded character sets for text communication - Part 2: Latin alphabetic and non-alpha&etic graphic characters. IS0 7372 : 1986, Trade data interchange - Trade Data E/ements Directory. IS0 7498 : 1984, Information processing systems - Open Systems Interconnection - Basic Ref

44、erence Model. IS0 8859 : 1987, Information processing - 8 bit single-byte coded graphic character sets - Part 1: Latin alphabet No. 1. Part 2: Latin alphabet No. 2. 1 IS0 9735 : 1988 (E) 3 Definitions For the purpose of this lnternational Standard, the definitions in annex A apply. 4 Syntax levels T

45、his International Standard specifies syntax levels A and B which are identical in at1 respects except for the character sets used. As requirements for additional syntactical features appear, further levels may be added. Unless interchange partners agreeto use other or additional characters, level A

46、shall use only the character set specified in clause 5.1, and level B only the characier set specified in clause 5,2 The conditional Service String Advice, UNA, (see annex B) provides the capability to specify the separator and other service characters used in the interchange in case they differ fro

47、m those in clausG 5. 5 Character sets For the characters in the sets below, the 7-bit codes in the basic IS0 646 standard shall be used, unless the corresponding 8- bit codes in IS0 6937 and 8859 or other bit codes are specifically agreed between the interchanging partners. See clause 4. 5.1 Level A

48、 character set Letters, upper case Numerals Space character Full stop Comma Hyphen/minus sign Opening parentheses Closing parentheses Oblique stroke (slash) Equals sign Apostrophe Plus sign Colon Question mark A to z 0 to 9 I ( 1 I - Reserved for use as: segment terminator + segment tag and data ele

49、ment separator : component data element separator ? release character ? immediately preceding one of the characters + : ? restores their normal meaning. E.g. 10?+10=20 means 10+10=20. Question mark is represented by ?. The following characters are part of the level A character set but cannot be used internationally in telex transmissions. Exclam at ion rn ark Quotation mark Percentage sign Ampersand Asterisk Semi-colon Less-than sign Greater-than sign ! 11 % 8 2 IS0 9735 : 1988 (E) 5.2 Level 8 character set This character set is not intended for transmission to telex machines.