CAN CSA-C22 2 NO 60745-2-2013 Hand-held motor-operated electric tools - Safety - Part 2-23 Particular requirements for die grinders and small rotary tools (First Edition Update No .pdf

《CAN CSA-C22 2 NO 60745-2-2013 Hand-held motor-operated electric tools - Safety - Part 2-23 Particular requirements for die grinders and small rotary tools (First Edition Update No .pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C22 2 NO 60745-2-2013 Hand-held motor-operated electric tools - Safety - Part 2-23 Particular requirements for die grinders and small rotary tools (First Edition Update No .pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、CAN/CSA-C22.2 No. 60745-2-23-13Hand-held motor-operated electric tools Safety Part 2-23: Particular requirements for die grinders and small rotary tools(IEC 60745-2-23:2012, MOD)CAN/CSA-C22.2 No. 60745-2-23-13(IEC 60745-2-23:2012, MOD)National Standard of Canada IEC 2012. CSA Group 2013. All rights

2、reserved. Unauthorized reproduction is strictly prohibited.Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers rep

3、resenting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of

4、 liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement

5、of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regula

6、tion. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQ

7、UENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CS

8、A GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or

9、entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information containe

10、d in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and owners

11、hipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and

12、 trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/

13、or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention

14、is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights

15、 is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTH

16、ESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ 25.140.30CAN/CSA-C22.2 No. 60745-2-23-13Hand-held motor-operated electric tools Safety Part 2-23: Particular requirements for die grinders and small rotary tools(IEC 60745-2-23:2012, MOD)Note: For brevity, this Stan

17、dard will be referred to as “CAN/CSA-C22.2 No. 60745-2-23” throughout.Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as CSA Group ) andUnderwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standardmay be

18、 submitted to CSA Group or UL at anytime. Revisions to this standard will be made only afterprocessing according to the standards development procedures of CSA Group and UL. CSA Group andUL will issue revisions to this standard by means of a new edition or revised or additional pages bearingtheir da

19、te of issue.ISBN 978-1-77139-283-9 2013 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject to review ve years from the date of publication, and suggestions for itsimprovement will be

20、 referred to the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard designation (number); relevant clause, table, and/or gure number; wording ofthe proposed change; and rati

21、onale for the change.To purchase CSA Group Standards and related publications, visit CSA Group s Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2015 Underwriters Laboratories Inc.UL s Standards for Safety are copyrighted by UL. Neither a printed nor electronic

22、copy of a Standardshould be altered in any way. All of UL s Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANSI/UL60745-2-2

23、3 as an American National Standard (ANSI) occurred on April 6, 2015. ANSI approval for astandard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or thePreface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval ofIEC-based standard

24、s.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in UL s On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-

25、888-853-3503.InterpretationsThe interpretation by the standards development organization of an identical or equivalent standard isbased on the literal text to determine compliance with the standard in accordance with the proceduralrules of the standards development organization. If more than one int

26、erpretation of the literal text has beenidentied, a revision is to be proposed as soon as possible to each of the standards developmentorganizations to more accurately reect the intent.CSA Group Effective DateThe effective date for CSA Group will be announced through a CSA Informs or CSA Group Certi

27、cationNotice.UL Effective DateThe effective date for UL is located in the Transmittal notice that accompanies the UL Standard.IEC CopyrightFor CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication60745-2-23, Hand-Held Motor-Operated Electric Tools Safety Par

28、t 2-23: Particular Requirements forDie Grinders and Small Rotary Tools, copyright 2012, are used in this standard with the consent of theInternational Electrotechnical Commission. The IEC Foreword is not a part of the requirements of thisstandard but is included for information purposes only.For UL,

29、 the text, gures and tables of IEC publication 60745-2-23, Hand-Held Motor-Operated ElectricTools Safety Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools, copyright2012 are used in this Standard with the consent of the IEC and the American National Standards Institute(ANSI)

30、. The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should becontacted regarding the reproduction of any portion of the IEC material. The IEC Foreword is not a partof the requirements of this Standard but is included for information purposes only. Copies of IECPublicat

31、ion 60745-2-23 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, NewYork, 10036, (212) 642- 4900.APRIL 6, 2015 CAN/CSA-C22.2 NO. 60745-2-23-13 UL 60745-2-23 5NATIONAL DIFFERENCESIn the CSA and UL publications of this standard, National Differences from the text of InternationalEl

32、ectrotechnical Commission (IEC) Publication 60745-2-23, Standard for Hand-Held Motor-OperatedElectric Tools Safety Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools,copyright 2012 are indicated by notations (differences) and are presented in bold text. The nationaldifference

33、 type is included in the body.There are ve types of National Differences as noted below. The difference type is noted on the rst lineof the National Difference in the standard. The standard may not include all types of these NationalDifferences.DR These are National Differences based on the national

34、 regulatory requirements.D1 These are National Differences which are based on basic safety principles and requirements,elimination of which would compromise safety for consumers and users of products.D2 These are national differences from IEC requirements based on existing safety practices. Thesereq

35、uirements reect national safety practices, where empirical substantiation (for the IEC or nationalrequirement) is not available or the text has not been included in the IEC standard.DC These are National Differences based on the component standards and will not be deleted untila particular component

36、 standard is harmonized with the IEC component standard.DE These are National Differences based on editorial comments or corrections.Addition / Add - An addition entails adding a complete new numbered clause, subclause,table, gure, or annex. Addition is not meant to include adding select words to th

37、e base IECtext.Modication / Modify - A modication is an altering of the existing base IEC text such as theaddition, replacement or deletion of certain words or the replacement of an entire clause,subclause, table, gure, or annex of the base IEC text.Deletion / Delete - A deletion entails complete de

38、letion of an entire numbered clause,subclause, table, gure, or annex without any replacement text.SEPTEMBER 20, 2013CAN/CSA-C22.2 NO. 60745-2-23-13 UL 60745-2-23623 ComponentsThis clause of Part 1 is applicable.24 Supply connection and external exible cordsThis clause of Part 1 is applicable.24.4DV.

39、1 DR Modication: Add the following to Clause 24.4 of the Part 1:A rotary tool may employ type SV or SVT cord.25 Terminals for external conductorsThis clause of Part 1 is applicable.26 Provision for earthingThis clause of Part 1 is applicable.27 Screws and connectionsThis clause of Part 1 is applicab

40、le.28 Creepage distances, clearances and distances through insulationThis clause of Part 1 is applicable.29 Resistance to heat, re and trackingThis clause of Part 1 is applicable, except as follows:29.3 Addition:DIE GRINDERS are considered to be subjected to severe duty conditions.30 Resistance to r

41、ustingThis clause of Part 1 is applicable.31 Radiation, toxicity and similar hazardsThis clause of Part 1 is applicable.APRIL 6, 2015 CAN/CSA-C22.2 NO. 60745-2-23-13 UL 60745-2-23 21This is generated text for gtxt.SEPTEMBER 20, 2013CAN/CSA-C22.2 NO. 60745-2-23-13 UL 60745-2-2322Standards Update Serv

42、iceCAN/CSA-C22.2 No. 60745-2-23-13September 2013Title: Hand-held motor-operated electric tools Safety Part 2-23: Particular requirements for die grinders and small rotary toolsPagination: 26 pages To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA

43、Update ServiceThe List ID that you will need to register for updates to this publication is 2422636.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Cana

44、dian Standards Association (operatingas “CSA Group”), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership associatio

45、n engaged in standards development and certification activities. CSA Group standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and comm

46、erce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSA Groups standards developm

47、ent by volunteering their time and skills to Committee work and supporting CSA Groups objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Groups total membership from which its Directors are chosen. Sustaining membe

48、rships represent a major source of income for CSA Groups standards development activities. CSA Group offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and cont

49、inually audits and inspects products that bear the CSA Group Mark. In addition to its head office and laboratory complex in Toronto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary