CAN CSA-C22 2 NO 60745-2-2004 Hand-held motor-operated electric tools - Safety - Part 2-1 Particular requirements for drills and impact drills (Second Edition).pdf

《CAN CSA-C22 2 NO 60745-2-2004 Hand-held motor-operated electric tools - Safety - Part 2-1 Particular requirements for drills and impact drills (Second Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C22 2 NO 60745-2-2004 Hand-held motor-operated electric tools - Safety - Part 2-1 Particular requirements for drills and impact drills (Second Edition).pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、Hand-held motor-operated electric tools Safety Part 2-1: Particular requirements for drills and impact drillsCAN/CSA-C22.2 No. 60745-2-1-04(IEC 60745-2-1:2003, MOD)National Standard of Canada(reaffirmed 2013)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.The Canadian Standards Association (CSA

2、), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certificatio

3、n activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and fede

4、ral governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work

5、 and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standard

6、s development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CS

7、A Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an

8、independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, w

9、rite toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement

10、 of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating

11、 domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individua

12、ls whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contrib

13、ution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing resp

14、onsibility of the accredited standards development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the orga

15、nization preparing the standard.The responsibility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary applicat

16、ion of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationStandards Update ServiceCAN/CSA-C22.2 No. 60745-2-1-04March 2004Title: Hand

17、-held motor-operated electric tools Safety Part 2-1: Particular requirements for drills and impact drillsPagination: 23 pages (x preliminary and 13 text)To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need

18、 to register for updates to this publication is 2416815.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Canadian Standards AssociationCAN/CSA-C22.2 No.

19、60745-2-1-04Second Edition(IEC 60745-2-1:2003, MOD)Underwriters Laboratories Inc.UL 60745-2-1Second EditionHand-Held Motor-Operated Electric Tools Safety Part 2-1:Particular Requirements for Drills and Impact DrillsMARCH 26, 2004This national standard is based on publication IEC 60745-2-1, Second Ed

20、ition (2003).ANSI/UL 60745-2-1-2004Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (CSA) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA or UL at any time. Revisions to th

21、is standard will be made only after processing according to the standards development procedures of CSA and UL. CSA and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. _ ISBN 1-55397-465-4 Copyright 2004 Canadian Standard

22、s Association All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. _ ISBN 0-7629-0910-2 Copyright 2004 Underwriters Laboratories Inc. Revisions of this Standard will be made by issuing revised or additional pages bea

23、ring their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. The most recent designation of ANSI/UL 60745-2-1 as an American National Standa

24、rd (ANSI) occurred on March 10, 2004. This ANSI/UL Standard for Safety, which consists of the Second edition is under continuous maintenance, whereby each revision is ANSI approved upon publication. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. W

25、ritten comments are to be sent to UL-RTP Standard Department, 12 Laboratory Dr., P.O. Box 13995, Research Triangle Park, NC, 27709-3995. _ MARCH 26, 2004 CAN/CSA-C22.2 NO. 60745-2-1-04 UL 60745-2-1 iii CONTENTS Preface . v Foreword (CSA)vii Foreword (UL)viii Canadian/US National Differences ix IEC 6

26、0745-2-1, Hand-Held Motor-Operated Electric Tools Safety Part 2-1: Particular Requirements for Drills and Impact Drills 1 Foreword. 2 1 Scope 4 2 Normative references 4 3 Definitions 4 4 General requirements 4 5 General conditions for the tests. 4 6 Void . 5 7 Classification . 5 8 Marking and instru

27、ctions . 5 9 Protection against access to live parts 5 10 Starting 5 11 Input and current . 5 12 Heating 5 13 Leakage current. 6 14 Moisture resistance . 6 15 Electric strength. 6 16 Overload protection of transformers and associated circuits 6 17 Endurance . 6 18 Abnormal operation . 7 19 Mechanica

28、l hazards 7 20 Mechanical strength 7 21 Construction 7 22 Internal wiring 8 23 Components 8 24 Supply connection and external flexible cords 8 25 Terminals for external conductors. 8 26 Provision for earthing 8 27 Screws and connections . 8 28 Creepage distances, clearances and distances through ins

29、ulation 8 29 Resistance to heat, fire and tracking. 8 30 Resistance to rusting. 8 31 Radiation, toxicity and similar hazards 8 Figures 9 iv CAN/CSA-C22.2 NO. 60745-2-1-04 UL 60745-2-1 MARCH 26, 2004 Annexes . 13 Annex K Battery Tool and Battery Packs 13 Annex L Battery Tools and Battery Packs Provid

30、ed with Mains Connection or Non-Isolated Sources 13 Bibliography 13 MARCH 26, 2004 CAN/CSA-C22.2 NO. 60745-2-1-04 UL 60745-2-1 v Preface This is the common CSA and UL standard for hand-held motor-operated electric tools. It is the second edition of CAN/CSA-C22.2 No. 60745-2-1 and the second edition

31、of UL 60745-2-1. This standard is based on IEC 60745-2-1, second edition. The first edition of this standard was designated CAN/CSA-C22.2 No. 745-2-1/UL 745-2-1. This Standard CAN/CSA-C22.2 No. 60745-2-1/UL 60745-2-1, second edition, supersedes: a) the first edition of CAN/CSA-C22.2 No. 745-2-1/UL 7

32、45-2-1 published in 1995; and b) CAN/CSA-C22.2 No. 745-4-1/UL 745-4-1, (requirements for battery tools and battery packs are now incorporated into the requirements of CAN/CSA-C22.2 No. 60745-2-1, second edition, and UL 60745-2-1, second edition). This common standard was prepared by the Canadian Sta

33、ndards Association (CSA) and Underwriters Laboratories Inc. (UL). This standard was reviewed by the CSA Subcommittee on Portable Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Elec

34、trical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada and has been approved by the American National Standards Institute (ANSI) as an American National Standard. Note: Although

35、 the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. A UL standard is current only if it incorporates the most recently adopted revisio

36、ns, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. Where reference is made to a specific number of samples to be tested, the specified number shall be considered a minimum quantity. Level of harmonization This standard adopts the IEC text

37、 with national differences. This standard is published as an equivalent standard for CSA and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as t

38、hose recognized as being in accordance with NAFTA Article 905, for example because of fundamental climatic, geographical, technological, or infrastructural factors, scientific justification, or the level of protection that the country considers appropriate. Presentation is word for word except for e

39、ditorial changes. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than

40、 one literal interpretation has been identified, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reflect the intent. CSA effective date The effective date for CSA International will be announced through CSA Informs or a CSA certi

41、fication notice. vi CAN/CSA-C22.2 NO. 60745-2-1-04 UL 60745-2-1 MARCH 26, 2004 UL effective date As of June 1, 2007, all products Listed or Recognized by UL must comply with the requirements in this Standard. Between March 26, 2004, and June 1, 2007, new product submittals to UL must be evaluated un

42、der all requirements in this Standard or, if requested in writing, evaluated under presently effective requirements only. The presently effective requirements are contained in the first edition of UL 745-2-1. Alternate constructions, currently listed to UL 45, eighth edition, may be evaluated to the

43、 first edition of UL 745-2-1 as referenced in the June 7, 2002, bulletin. General There are five types of National Differences as noted below. The difference type is noted on the first line of the National Difference in the standard. The standard may not include all types of these National Differenc

44、es. National Differences from the text of the International Electrotechnical Commission (IEC) publication 60745-2-1 (Hand-Held Motor-Operated Electric Tools Safety Part 2-1: Particular Requirements for Drills and Impact Drills) are indicated by the following notation: DR These are National Differenc

45、es based on the national Regulatory Requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are National Differences based on safety practices. These are di

46、fferences for IEC requirements that may be acceptable, but adopting the IEC requirements would require considerable retesting or redesign on the manufacturers part. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is har

47、monized with the IEC component standard. DE These are National Differences based on editorial comments or corrections. MARCH 26, 2004 CAN/CSA-C22.2 NO. 60745-2-1-04 UL 60745-2-1 vii Foreword (CSA) The Canadian Standards Association (CSA) develops standards under the name Canadian Standards Associati

48、on, and provides certification and testing under the name CSA International. CSA International provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conformity with CSA Stan

49、dards. CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form the basis for acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additiona