CAN CSA-C22 2 NO 60745-2-13-2011 Hand-held motor operated electric tools - Safety - Part 2-13 Particular requirements for chain saws (First Edition Update No 1 December 2014 Update.pdf

《CAN CSA-C22 2 NO 60745-2-13-2011 Hand-held motor operated electric tools - Safety - Part 2-13 Particular requirements for chain saws (First Edition Update No 1 December 2014 Update.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C22 2 NO 60745-2-13-2011 Hand-held motor operated electric tools - Safety - Part 2-13 Particular requirements for chain saws (First Edition Update No 1 December 2014 Update.pdf（98页珍藏版）》请在麦多课文档分享上搜索。

1、Hand-held motor operated electric tools Safety Part2-13:Particular requirements for chain sawsCAN/CSA-C22.2 No. 60745-2-13-11(IEC 60745-2-13:2006+A1:2009, MOD)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) s

2、tandards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes

3、 rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without li

4、mitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information publishe

5、d in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DI

6、RECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NE

7、GLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to

8、 render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA

9、accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance

10、with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by

11、 copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modi

12、fication, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reser

13、ves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are express

14、ly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this d

15、ocument is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA

16、 to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy o

17、f this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes you

18、r acceptance of the terms and conditions of this Legal Notice.Update No. 2CAN/CSA-C22.2 No. 60745-2-13-11May 2015Note: For information about the Standards Update Service or if you are missing any updates, go to shop.csa.ca or e-mail techsupportcsagroup.org.Title: Hand-held motor operated electric to

19、ols Safety Part 2-13: Particular requirements for chain saws originally published December 2011Revisions issued: Update No. 1 December 2014The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages:Revised Title page, copyrig

20、ht page, and PrefaceNew Clauses KDV.1 and KDV.2 and Annexes 101.DVA and 101.DVBDeleted None Update your copy by inserting these revised pages.Keep the pages you remove for reference.CSA GroupCAN/CSA-C22.2 No. 60745-2-13-11First Edition(IEC 60745-2-13:2006+A1:2009, MOD)Underwriters Laboratories Inc.U

21、L 60745-2-13First EditionHand-Held Motor-Operated Electric Tools Safety Part 2-13:Particular Requirements for Chain SawsDecember 8, 2011(Title Page Reprinted: May 15, 2015)This national standard is based on publication IEC 60745-2-13, Edition 2.1 (2011).ANSI/UL 60745-2-13-2015Approved byCommitment f

22、or AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as CSA Group ) andUnderwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standardmay be submitted to CSA Group or UL at anytime. Revisions to this standard will be made

23、only afterprocessing according to the standards development procedures of CSA Group and UL. CSA Group andUL will issue revisions to this standard by means of a new edition or revised or additional pages bearingtheir date of issue.ISBN 978-1-55491-681-8 2011 CSA GroupAll rights reserved. No part of t

24、his publication may be reproduced in any form whatsoever without theprior permission of the publisher.CSA Standards are subject to periodic review, and suggestions for their improvement will be referredto the appropriate committee. To submit a proposal for change to CSA Standards, please send thefol

25、lowing information to inquirescsa.ca and include Proposal for change in the subject line:Standard designation (number); relevant clause, table, and/or gure number; wording of the proposedchange; and rationale for the change.To purchase CSA Standards and related publications, visit CSA s Online Store

26、 at www.ShopCSA.ca orcall toll-free 1-800-463-6727 or 416-747-4044.Copyright 2015 Underwriters Laboratories Inc.UL s Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of UL s Standards and all copyrights, ownerships, and

27、rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANSI/UL60745-2-13 as an American National Standard (ANSI) occurred on May 15, 2015. ANSI approval for astandard does not i

28、nclude the Cover Page, Transmittal Pages, Title Page (front and back), or thePreface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval ofIEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Propos

29、als should be submitted via a Proposal Request in UL s On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTENTSPreface .5NATIONAL DIFFERENCES .7FOREWORD 81 Scope 122 Normative references .123 Terms

30、 and denitions .12A4 General requirements .12B5 General conditions for the tests 146 Void 147 Classication 148 Marking and instructions 149 Protection against access to live parts 1810 Starting 1811 Input and current .1812 Heating 1813 Leakage current 1814 Moisture resistance .1815 Electric strength

31、 1816 Overload protection of transformers and associated circuits 1917 Endurance .1918 Abnormal operation .1919 Mechanical hazards .1920 Mechanical strength .2321 Construction .2422 Internal wiring 2423 Components .2424 Supply connection and external exible cords 2425 Terminals for external conducto

32、rs .2526 Provision for earthing 2527 Screws and connections .2528 Creepage distances, clearances and distances through insulation 2529 Resistance to heat, re and tracking 2530 Resistance to rusting 2531 Radiation, toxicity and similar hazards .25DECEMBER 19, 2014 CAN/CSA-C22.2 NO. 60745-2-13-11 UL 6

33、0745-2-13 3AnnexesAnnex K (normative) Battery tools and battery packsAnnex L (normative) Battery tools and battery packs provided with mains connection ornon-isolated sourcesAnnex AA (normative) Symbols for safety recommendations and warningsAnnex BB (informative) Instructions concerning the proper

34、techniques for basic felling, limbing,and cross-cuttingAnnex101.DVA(normative)(U.S.Only)AdditionalRequirementsforBattery-OperatedTop-HandleChain SawsAnnex 101.DVB (normative) Additional requirements for battery-operated pruning sawsBibliographyMAY 15, 2015CAN/CSA-C22.2 NO. 60745-2-13-11 UL 60745-2-1

35、34PrefaceThis is the harmonized CSA Group and UL standard for Hand-Held Motor-Operated Electric Tools Safety Part 2-13: Particular Requirements for Chain Saws. It is the rst edition of CAN/CSA C22.2 No.60745-2-13, and the rst edition of UL 60745-2-13. This harmonized standard has been jointly revise

36、d onMay 15, 2015. For this purpose, CSA Group and UL are issuing revision pages dated May 15, 2015.This harmonized standard is based on IEC Publication IEC 60745-2-13, edition 2.1 (edition 2:2006consolidated with amendment 1:2009).This harmonized standard was prepared by the CSA Group and Underwrite

37、rs Laboratories Inc. (UL). Theefforts and support of the Harmonization Working Group for the Adoption of the IEC Series of Hand-Held,Motor-Operated Tool Standards, are gratefully acknowledged.This standard is considered suitable for use for conformity assessment within the stated scope of thestandar

38、d.This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated ElectricTools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products andthe CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formallyappr

39、oved by the CSA Technical Committee.This standard has been approved as a National Standard of Canada by the Standards Council of Canada(SCC).This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is m

40、ade to a specic number of samples to be tested, the specied number isconsidered a minimum quantity.Note:Althoughtheintendedprimaryapplicationofthisstandardisstatedinitsscope,itisimportanttonotethatit remains the responsibility of the users of the standard to judge its suitability for their particula

41、r purpose.This CAN/CSA-C22.2 No. 60745-2-13, Standard for Safety for Hand-Held Motor-Operated Electric ToolsSafety Part 2-13: Particular Requirements For Chain Saws, is to be used in conjunction with the fourthedition of CAN/CSA-C22.2 No. 60745-1. The requirements for chain saws are contained in thi

42、s Part 2Standard and CAN/CSA-C22.2 No. 60745-1. Requirements of this Part 2 Standard, where stated, amendthe requirements of CAN/CSA-C22.2 No. 60745-1. Where a particular subclause of CAN/CSA-C22.2 No.60745-1 is not mentioned in CAN/CSA-C22.2 No. 60745-2-13, the CAN/CSA-C22.2 No. 60745-1subclause ap

43、plies.This UL Standard 60745-2-13 Standard for Safety for Hand-Held Motor-Operated Electric Tools SafetyPart 2-13: Particular Requirements For Chain Saws, is to be used in conjunction with the fourth editionof UL 60745-1. The requirements for chain saws are contained in this Part 2 Standard and UL 6

44、0745-1.Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60745-1. Where aparticular subclause of UL 60745-1 is not mentioned in UL 60745-2-13, the UL 60745-1 subclauseapplies.MAY 15, 2015 CAN/CSA-C22.2 NO. 60745-2-13-11 UL 60745-2-13 5Level of HarmonizationThis standar

45、d adopts the IEC text with national differences.This standard is published as an equivalent standard for CSA and UL.An equivalent standard is a standard that is substantially the same in technical content, except as follows:Technical national differences are allowed for codes and governmental regula

46、tions as well as thoserecognized as being in accordance with NAFTA Article 905, for example because of fundamental climatic,geographical, technological, or infrastructural factors, scientic justication, or the level of protection thatthe country considers appropriate. Presentation is word for word e

47、xcept for editorial changes.All national differences from the IEC text are included in the CSA and UL versions of the standard. Whilethe technical content is the same in each organization s version, the format and presentation may differ.Reasons for Differences from IECDifferences from the IEC are b

48、eing added in order to address regulatory and safety situations present inthe US and Canada.InterpretationsThe interpretation by the standards development organization of an identical or equivalent standard isbased on the literal text to determine compliance with the standard in accordance with the

49、proceduralrules of the standards development organization. If more than one literal interpretation has been identied,a revision is to be proposed as soon as possible to each of the standards development organizations tomore accurately reect the intent.CSA Group Effective DateThe effective date for CSA International will be announced through CSA Informs or a CSA certicationnotice.UL Effective DateThe effective date for UL LLC will be announced through Industry File Review Announcement Letter.IE