BS PD CLC TR 62453-501-2009 Field device tool (FDT) interface nspecification — nPart 501 Communication implementation for ncommon object model — IEC 61784 CPF 1《菲尔德设计工具(FDT)接口规范 第5.pdf

《BS PD CLC TR 62453-501-2009 Field device tool (FDT) interface nspecification — nPart 501 Communication implementation for ncommon object model — IEC 61784 CPF 1《菲尔德设计工具(FDT)接口规范 第5.pdf》由会员分享，可在线阅读，更多相关《BS PD CLC TR 62453-501-2009 Field device tool (FDT) interface nspecification — nPart 501 Communication implementation for ncommon object model — IEC 61784 CPF 1《菲尔德设计工具(FDT)接口规范 第5.pdf（92页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 501: Communication implementation for common object model IEC 61784 CPF 1PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/

2、EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSINational forewordThis Published Document is the UK implementation of CLC/TR 62453-501:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and contr

3、ol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62568 8ICS 25.040.

4、40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDAR

5、DPD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSITECHNICAL REPORT CLC/TR 62453-501 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisa

6、tion Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-501:2009 E ICS 25.040.40; 35.100.05; 35

7、.110 English version Field device tool (FDT) interface specification - Part 501: Communication implementation for common object model - IEC 61784 CPF 1 (IEC/TR 62453-501:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 501: Implmentation des communications pour

8、le modle objet commun - CEI 61784 CPF 1 (CEI/TR 62453-501:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 501: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) -Kommunikationsprofilfamilie (CPF) 1 nach IEC 61784 (IEC/TR 62453-501:2009) This Technical Report was a

9、pproved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norwa

10、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSICLC/TR 62453-501:2009 - 2 - Foreword The text of document 65E/65/CDV, future

11、 edition 1 of IEC/TR 62453-501, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-501 on 2009-10-01. This standard is to b

12、e used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-501:2009 was approved by CENELEC as a Technical Report without any modification. _ PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHIN

13、A STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI- 3 - CLC/TR 62453-501:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For d

14、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Yea

15、r Title EN/HD Year IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/TR 62453-41 2009 Field device tool (FDT

16、) interface specification - Part 41: Object model integration profile - Common object model CLC/TR 62453-41 2009 IEC 62453-301 2009 Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 EN 62453-301 2009 _ PD CLC/TR 62453-501:2009Licensed Cop

17、y: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 2 TR 62453-501 IEC:2009(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 6 3.1 Terms and definitions 6 3.2 Symbols and abbreviated te

18、rms.6 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 3.3.3 Use of UML .7 4 Bus category 7 5 Access to instance and device data7 6 Protocol specific usage of general data types.7 7 Protocol specific common data types - FdtFFDataTypesSchema 8

19、8 Network management data types10 8.1 General .10 8.2 H1 Management FdtFFH1ManagementSchema 10 8.3 HSE Management FdtFFHseManagementSchema31 8.4 Address management50 8.5 FF specific Parameter Set .50 9 Communication data types .50 9.1 General .50 9.2 FMS communication FdtFFFmsSchema50 9.3 H1 communi

20、cation FdtFFH1CommunicationSchema.56 9.4 HSE communication FdtFFHseCommunicationSchema 60 9.5 Standard block communication BtmFFCommunicationSchema .65 10 Channel parameter data types FdtFFChannelParameterSchema .66 11 Device identification .67 11.1 Device type identification data types FDTFieldbusI

21、dentSchema .67 11.2 Topology scan data types69 11.2.1 General .69 11.2.2 Scan for devices DtmFFSchema.69 11.2.3 Scan for blocks FdtFFBlockSchema70 11.3 Scan identification data types FDTFieldbusScanIdentSchema 70 11.4 Device type identification data types FDTFieldbusDeviceIdentSchema.72 11.5 XSLT Tr

22、ansformation 75 Bibliography87 Figure 1 Part 501 of the IEC 62453 series .5 Table 1 Protocol specific usage of general data types7 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSITR 62453-501 IEC:2009(E) 5 INTRODUCTION This p

23、art of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the development o

24、f servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-l

25、evel system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance. A device-spe

26、cific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration is in general open for all kind of fieldbusses and

27、thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC/TR 62453-501 is aligned in the structure of IEC 62453 series. Part 501Communicationimplementationfor common object model IEC 61784 CPF 1Figure 1 Part 501 of the IEC 62453

28、 series PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 6 TR 62453-501 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 501: Communication implementation for common object model IEC 61784 CPF 1 1 Scope IEC/TR

29、 62453-501, which is a technical report, provides additional information for integrating the Foundation Fieldbus (FF) protocol into the COM implementation of the FDT Specification (IEC/TR 62453-41). The document describes communication definitions, protocol specific extensions and the means for bloc

30、k (e.g. transducer, resource or function blocks) representation. The new protocol specific definitions are based on FF-Specifications for H1 and HSE protocols. Furthermore, the definitions contain information that is needed by systems to configure FF Devices. The scope is limited to Foundation Field

31、bus device and system specific definitions. This specification neither contains the FDT specification nor modifies it. 2 Normative references The following referenced documents are indispensable for the application of this specification. For dated references, only the edition cited applies. For unda

32、ted references, the latest edition of the referenced document (including any amendments) applies IEC 62453-1:2009, Field Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009, Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description

33、 IEC/TR 62453-41:2009,Field Device Tool (FDT) interface specification Part 41: Object model integration profile Common object model IEC 62453-301:2009, Field Device Tool (FDT) interface specification Part 301: Communication profile integration IEC 61784 CPF 1 3 Terms, definitions, symbols, abbreviat

34、ed terms and conventions 3.1 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 62453-1, IEC 62453-2, IEC/TR 62453-41 and the following apply. 3.2 Symbols and abbreviated terms CP Communication Profile IEC 61784-1 CPF Communication Profile Family IEC 61784

35、-1 UML Unified Modelling Language ISO/IEC 19501 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSITR 62453-501 IEC:2009(E) 7 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and refe

36、rencing of data types are explained in IEC 62453-2 Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used when specifying requirements. Usage of “shall” or “Mandatory” No exceptions allowed. Usage of “should” or “Recommended” Strong recommendation. It may make sense in speci

37、al exceptional cases to differ from the described behaviour. Usage of “can or “Optional Function or behaviour may be provided, depending on defined conditions. 3.3.3 Use of UML Figures in this document are using UML notation as defined in Annex A of IEC 62453-1. 4 Bus category IEC 61784 CPF 1 protoc

38、ol is identified by the identifiers, as specified in IEC 62453-301. 5 Access to instance and device data Used at methods: IDtmParameter:GetParameters() IDtmParameter:SetParameters() These methods shall provide access to at least to all parameters as defined in IEC 62453-301. 6 Protocol specific usag

39、e of general data types Table 1 shows how general data types are used with IEC 61784 CPF 1 devices. Table 1 Protocol specific usage of general data types Attribute Description for use fdt:address fdt:protocolId fdt:deviceTypeId fdt:deviceTypeInformation fdt:deviceTypeInformationPath fdt:manufacturer

40、Id All these attributes of the FDTDatatype schema are used as defined in IEC 62453-301. PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 8 TR 62453-501 IEC:2009(E) Attribute Description for use fdt:semanticId fdt:applicationD

41、omain fdt:tag 7 Protocol specific common data types - FdtFFDataTypesSchema This clause specifies the protocol specific common data types, which are used in the definition of other data types. PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolle

42、d Copy, (c) BSITR 62453-501 IEC:2009(E) 9 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 10 TR 62453-501 IEC:2009(E) 8 Network management data types 8.1 General The data types specified in this clause are used at following

43、methods: IDtmParameter:GetParameters IDtmParameter:SetParameters All parameters defined in EDS in ther Params-section shall be exposed by these methods. 8.2 H1 Management FdtFFH1ManagementSchema PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontro

44、lled Copy, (c) BSITR 62453-501 IEC:2009(E) 11 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 12 TR 62453-501 IEC:2009(E) PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncon

45、trolled Copy, (c) BSITR 62453-501 IEC:2009(E) 13 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 14 TR 62453-501 IEC:2009(E) PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Un

46、controlled Copy, (c) BSITR 62453-501 IEC:2009(E) 15 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 16 TR 62453-501 IEC:2009(E) PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45,

47、 Uncontrolled Copy, (c) BSITR 62453-501 IEC:2009(E) 17 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 18 TR 62453-501 IEC:2009(E) PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:

48、45, Uncontrolled Copy, (c) BSITR 62453-501 IEC:2009(E) 19 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 20 TR 62453-501 IEC:2009(E) PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010

49、08:45, Uncontrolled Copy, (c) BSITR 62453-501 IEC:2009(E) 21 PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSI 22 TR 62453-501 IEC:2009(E) PD CLC/TR 62453-501:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:45, Uncontrolled Copy, (c) BSITR 62453-501 IEC:2009(E)