BS ISO IEC 11695-2-2015 Identification cards Optical memory cards Holographic recording method Dimensions and location of accessible optical area《识别卡 光学存储卡 全息记录方法 可到达光学区域的尺寸和位置》.pdf

《BS ISO IEC 11695-2-2015 Identification cards Optical memory cards Holographic recording method Dimensions and location of accessible optical area《识别卡 光学存储卡 全息记录方法 可到达光学区域的尺寸和位置》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 11695-2-2015 Identification cards Optical memory cards Holographic recording method Dimensions and location of accessible optical area《识别卡 光学存储卡 全息记录方法 可到达光学区域的尺寸和位置》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO/IEC 11695-2:2015Identification cards Opticalmemory cards Holographicrecording method Part 2: Dimensions and location of accessible optical areaBS ISO/IEC 11695-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO/IEC 11695-2:20

2、15. It supersedes BS ISO/IEC 11695-2:2008 which is withdrawn.NOTE: ISO/IEC have acknowledged that the supersession information listed in the ISO/IEC foreword to this document is inaccurate.The UK participation in its preparation was entrusted to TechnicalCommittee IST/17, Cards and personal identifi

3、cation.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI S

4、tandards Limited 2015ISBN 978 0 580 84446 1ICS 35.240.15Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2015.Amendments/corrigenda issued since publicationD

5、ate Text affectedBS ISO/IEC 11695-2:2015Identification cards Optical memory cards Holographic recording method Part 2: Dimensions and location of accessible optical areaCartes didentification Cartes mmoire optique Mthode denregistrement holographique Partie 2: Dimensions et emplacement de la zone op

6、tique accessibleINTERNATIONAL STANDARDISO/IEC11695-2Reference numberISO/IEC 11695-2:2015(E)Second edition2015-04-01 ISO/IEC 2015BS ISO/IEC 11695-2:2015ii ISO/IEC 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015All rights reserved. Unless otherwise specified, no part of this publicat

7、ion may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country

8、of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandISO/IEC 11695-2:2015(E)BS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E)Foreword ivIntroduction v1 Scope .12 Normative reference

9、s 13 Terms and definitions .14 Dimensions and location .14.1 Accessible optical area . 14.2 Dimensions R, S, T, U, V 24.2.1 Chip-type accessible optical area 34.2.2 Magnetic-stripe-type accessible optical area 44.3 Dimensions X, Y 44.4 Skew . 44.5 Hologram size 44.6 Arrangement of multiple holograms

10、 5Bibliography 6 ISO/IEC 2015 All rights reserved iiiContents PageBS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E)ForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National

11、 bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Ot

12、her international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and those intended

13、 for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/

14、directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document wi

15、ll be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and express

16、ions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword Supplementary information .The committee responsible for this document is ISO/IEC JTC 1, Information technology, SC 17, C

17、ards and personal identification.This second edition cancels and replaces the first edition (ISO/IEC 11695-1:2008), which has been technically revised.ISO/IEC 11695 consists of the following parts, under the general title Identification cards Optical memory cards Holographic recording method : Part

18、1: Physical characteristics Part 2: Dimensions and location of accessible optical area Part 3: Optical properties and characteristicsiv ISO/IEC 2015 All rights reservedBS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E)IntroductionThis part of ISO/IEC 11695 is one of a series of International Standards d

19、efining the parameters for optical holographic memory cards and the use of such cards for the storage and interchange of digital data.These International Standards recognize the existence of different methods for recording and reading information on optical memory cards, the characteristics of which

20、 are specific to the recording method employed. In general, these different recording methods will not be compatible with each other. Therefore, the standards are structured to accommodate the inclusion of existing and future recording methods in a consistent manner.This part of ISO/IEC 11695 is spe

21、cific to optical memory cards using the holographic recording method. Characteristics which apply to other specific recording methods are found in separate standards documents.This part of ISO/IEC 11695 defines the dimensions and location of accessible optical area and the extent of compliance with,

22、 addition to, and/or deviation from the relevant base document, ISO/IEC 11693-1.The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that compliance with this part of ISO/IEC 11695 may involve the u

23、se of patents.The ISO and IEC take no position concerning the evidence, validity, and scope of these patent rights.The holders of these patent rights have assured the ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants

24、throughout the world. In this respect, the statements of the holders of these patent rights are registered with the ISO and IEC. Information may be obtained from:Certego GmbHKeltenring 1282041 OberhachingGermanyAttention is drawn to the possibility that some of the elements of this part of ISO/IEC 1

25、1695 might be the subject of patent rights other than those identified above. ISO and IEC are not to be held responsible for identifying any or all such patent rights. ISO/IEC 2015 All rights reserved vBS ISO/IEC 11695-2:2015BS ISO/IEC 11695-2:2015Identification cards Optical memory cards Holographi

26、c recording method Part 2: Dimensions and location of accessible optical area1 ScopeThis part of ISO/IEC 11695 defines the dimensions and location of the accessible optical area of optical memory cards using the holographic recording method.2 Normative referencesThe following documents, in whole or

27、in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 11693-1, Identification cards Optical

28、 memory cards Part 1: General characteristicsISO/IEC 11695-1, Identification cards Optical memory cards Holographic recording method Part 1: Physical characteristicsISO/IEC 11695-3, Identification cards Optical memory cards Holographic recording method Part 3: Optical properties and characteristics3

29、 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO/IEC 11695-1, ISO/IEC 11695-3, and the following apply.3.1reference hologramhologram located at a defined position on the accessible optical area of the holographic memory card, containing information conc

30、erning the location and content of further holograms on the card3.2trackline running parallel to the longer reference edge of the card providing orientation for the storage of multiple holograms3.3reference tracktrack containing the reference hologram4 Dimensions and locationISO/IEC 11695 part 2 app

31、lies to cards with a specified accessible optical area.4.1 Accessible optical areaThe dimensions and location of the specified accessible optical area shall be as shown in Figure 1.INTERNATIONAL STANDARD ISO/IEC 11695-2:2015(E) ISO/IEC 2015 All rights reserved 1BS ISO/IEC 11695-2:2015ISO/IEC 11695-2

32、:2015(E)Dimensions in millimetresReference edge A B U V S T Reference edge Accessible optical area X Y Reference trackHologramRadius of Curvature R A = 85,47 to 85,72 (ISO IEC 7810)B = 53,92 to 54,02 (ISO IEC 7810)R, S, T, U, V see 4.2X,Y see 4.3NOTE Drawing not to scaleFigure 1 Accessible optical a

33、rea4.2 Dimensions R, S, T, U, VThis part of ISO/IEC 11695 defines two types of accessible optical area: one references a contact chip-type location and the other a magnetic-stripe-type location (see Fig. 2 and Fig 3)2 ISO/IEC 2015 All rights reservedBS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E)4.2.

34、1 Chip-type accessible optical areaDimensions in millimetresR = 2,2 mm (radius of curvature)S = 8,5 mmT = 13,0 mmU = 4,1 mmV = 11,8 mmNOTE Drawing not to scaleFigure 2 Chip-type accessible optical area ISO/IEC 2015 All rights reserved 3BS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E)4.2.2 Magnetic-str

35、ipe-type accessible optical areaDimensions in millimetres5,54 10,28 15 10 15,82 0,02 0,2 position of single hologram 53,92 - 54,03 0,68 0,84 85,47 85,72 R = not applicableS = not applicableT = 85,47 mm to 85,72 mmU = 5,54 mmV = 10,28 mmNOTE Drawing not to scaleFigure 3 Magnetic-stripe-type accessibl

36、e optical area4.3 Dimensions X, YAt location X,Y relative to the reference edges a reference hologram is placed (see figure 1).According to the accessible optical area as described in 4.2, this part of ISO/IEC 11695 defines the position for the reference hologram to be X = 15 mm, Y = 10 mm.4.4 SkewT

37、he skew of the reference track relative to the horizontal reference edge of the card shall be less than or equal to 0,2. See Figure 1.4.5 Hologram sizeThe hologram size is not fixed, but shall be left to each industry user group to specify for those applications requiring interchange. Typical values

38、 of the size of a hologram ranges between 0.02 mm2and 4 mm2.This part of ISO/IEC 11695 defines the hologram size to be 4 mm, therefore the size of the hologram (hx, hy) is defined to be hx = 2 mm, hy = 2 mm.4 ISO/IEC 2015 All rights reservedBS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E)4.6 Arrangeme

39、nt of multiple hologramsThe optical area can contain data in form of one or more holograms. The location of the reference hologram is at location X, Y relative to the reference edges of the card (see Fig. 1).If more than one hologram is located on the optical area of the card, holograms are arranged

40、 on the reference track or on tracks parallel to the reference track (see Fig. 1, Fig. 4). A minimum distance between the holograms has to be considered to avoid crosstalk from neighboring holograms when reading out one hologram. The distance (dx, dy) depends on the size of holograms (see 4.5) and h

41、as to be greater equal than the size of the hologram (hx, hy).This part of ISO/IEC 11695 defines the distance between the holograms (dx, dy) to be dx = 2 mm, dy = 2 mm.xxxxxxhy hx dx dy dx hxdy hyFigure 4 Arrangement of multiple holograms ISO/IEC 2015 All rights reserved 5BS ISO/IEC 11695-2:2015ISO/

42、IEC 11695-2:2015(E)Bibliography1 ISO/IEC 7811-2, Identification cards Recording technique Part 2: Magnetic stripe Low coercivity2 ISO/IEC 7811-6, Identification cards Recording technique Part 6: Magnetic stripe High coercivity3 ISO/IEC 7816-2, Identification cards Integrated circuit cards Part 2: Ca

43、rds with contacts Dimensions and location of the contacts4 ISO/IEC 7810, Identification cards Physical characteristics5 ISO/IEC 10373-1, Identification cards Test methods Part 1: General characteristics6 ISO/IEC 10373-5, Identification cards Test methods Part 5: Optical memory cards6 ISO/IEC 2015 Al

44、l rights reservedBS ISO/IEC 11695-2:2015BS ISO/IEC 11695-2:2015ISO/IEC 11695-2:2015(E) ISO/IEC 2015 All rights reservedICS 35.240.15Price based on 6 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, in

45、formation and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, gover

46、nment, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and acros

47、s all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying

48、 standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, ha

49、rd copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its a