BS ISO 11861-1999 Textile floor coverings - Coir mats - Types and specification《纺织品地板覆盖物 椰壳粗纤维垫 类型和规范》.pdf

《BS ISO 11861-1999 Textile floor coverings - Coir mats - Types and specification《纺织品地板覆盖物 椰壳粗纤维垫 类型和规范》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 11861-1999 Textile floor coverings - Coir mats - Types and specification《纺织品地板覆盖物 椰壳粗纤维垫 类型和规范》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 11861:1999 Textile floor coverings Coir mats Types and specification ICS 59.080.60BSISO 11861:1999 This British Standard, having been prepared under the directionof the Sector Committeefor Materials and Chemicals, waspublished underthe authorityof the Standards Committee and

2、comesinto effect on 15 October 1999 BSI 04-2000 ISBN 0 580 32814 7 National foreword This British Standard reproduces verbatim ISO11861:1999 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee PRI/3, Textile floor coverings, whi

3、ch has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate the

4、m in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section ent

5、itled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compli

6、ance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title page, pages ii to iv, pages 1 and 2, an inside back cover and abackcover. This standard has been updated

7、 (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO 11861:1999 BSI 04-2000 i Contents Page National foreword Inside front cover Foreword iii Text of IS

8、O 11861 1ii blankBSISO 11861:1999 ii BSI 04-2000 Contents Page Foreword iii 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Requirements 1 5 Marking 2 Annex A (normative) Methods of testing of coir mats Inside back cover Table 1 Requirements 2BSISO 11861:1999 BSI 04-2000 iii Foreword

9、ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical

10、committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of elect

11、rotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires ap

12、proval by at least75% of the member bodies casting a vote. International Standard ISO11861 was prepared by Technical Committee ISO/TC38, Textiles, Subcommittee SC12, Textile floor coverings. Annex A forms a normative part of this International Standard.iv blankBSISO 11861:1999 BSI 04-2000 1 1 Scope

13、This International Standard specifies the requirements for mats produced from coir fibre, with or without pile. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated reference

14、s, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated referen

15、ces, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 1763:1986, Carpets Determination of number of tufts and/or loops per unit length and per unit area. ISO 2549:1972, Textile floor coverings

16、Hand-knotted carpets Determination of tuft leg length above the woven ground. ISO 3018:1974, Textile floor coverings Rectangular textile floor coverings Determination of dimensions. ISO 7211-2:1984, Textiles Woven fabrics Construction Methods of analysis Part2:Determination of number of threads per

17、unit length. ISO 8543:1998, Textile floor coverings Methods for determination of mass. 3 Terms and definitions For the purposes of this International Standard the following terms and definitions apply. 3.1 General 3.1.1 coir fibre obtained from husks of the coconut (Cocos nucifera) by rotting or by

18、mechanical extraction 3.2 Types of coir mat 3.2.1 bit mat mat with the pile formed by insertion of bits of yarn on every alternate strand of chain (warp) 3.2.2 corridor mat mat in which both warp and weft strands are continuous without tucking in or binding 3.2.3 creel mat mat made up of two or more

19、 chains, one tight (forming the binding) and the others slack forming the pile, the pile being produced by cutting slack chain bent over a grooved rod suitably inserted between the slack and tight chains 3.2.4 fibre mat mat made up of two chains, one tight and the other binding, the pile being forme

20、d by insertion of tufts of coir fibre on alternate strands of tight chain 3.2.5 gymnasia mat mat with pile formed by cutting three or more yarns folded together and wound around a grooved iron rod along with alternate ends of warp NOTEThe pile can be made thicker to meet specific requirements. 3.2.6

21、 loop mat mat made up of three chains, one tight and others slack working as pile or binding the pile being formed by loops formed out of slack chain in the weaving process 3.2.7 mesh mat mat made by laying coir yarn in a criss-cross manner between a number of nails fixed on a frame and knotting the

22、 intersecting points with coir yarn 3.2.8 rod mat mat with pile formed by cutting two or more strands of yarn folded together and wound around a grooved iron rod along with alternate ends of warp 3.2.9 rope mat (lovers knot mat) mat made with a coir rope guided through a number of upright nails fixe

23、d on a flat surface NOTEThis mat may be made either in oval or oblong shapes. 3.2.10 sinnet mat mat made of plaited (or braided) coir yarn of three or more strands stitched together in a frame 4 Requirements The constructional particulars of the coir mats and the nominal values for the properties li

24、sted in Table 1 shall be agreed between the purchaser and the supplier subject to the requirements ofTable 1.BSISO 11861:1999 2 BSI 04-2000 Table 1 Requirements 5 Marking The coir mats and/or label attached to the mats shall bear the following markings. a) number and year of this International Stand

25、ard,i.e.ISO 11861:1999; b) type of coir mat (see clause3); c) dimensions; d) number of ends and picks per decimetre; e) pile height, in millimetres; f) mass, in grams per square metre. Characteristic Requirements Test method Number of ends per dm Nominal value 1 Clause A.1 Number of picks per dm Pil

26、e height (pile mats only) mm Nominal value 3 mm ISO 2549:1972 Dimensions Nominal value 10 mm ISO 3018:1974 Mass (g/m 2 ) Nominal value 5% Clause A.2BSISO 11861:1999 BSI 04-2000 Annex A (normative) Methods of testing of coir mats A.1 Determination of ends and picks per decimetre Lay the test specimen

27、 on a horizontal surface with its face downward. Count the number of ends and picks in a distance of one decimetre by the method given in ISO7211-2:1984 or ISO1763:1986 (for non-pile mats). A.2 Determination of mass a) Determine the mass of the test specimen to the nearest ten grams according to the

28、 method given in ISO8543:1998 and calculate its mass, in grams per square metre, or b) Determine the mass of the test mat to the nearest ten grams by weighing the whole mat on an appropriate balance and calculate its mass in grams per square metre, after measuring the dimensions in accordance with I

29、SO3018:1974. Record the temperature and RH under which the measurements were made.BS ISO 11861:1999 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe

30、and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products a

31、nd services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an ind

32、ividual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to

33、 orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Li

34、brary and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards devel

35、opments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publication

36、s of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission

37、 from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.