BS ISO 11107-2009 Recreational diving services - Requirements for training programmes on enriched air nitrox (EAN) diving《娱乐潜水服务 高氧潜水(EAN)训练程序要求》.pdf

《BS ISO 11107-2009 Recreational diving services - Requirements for training programmes on enriched air nitrox (EAN) diving《娱乐潜水服务 高氧潜水(EAN)训练程序要求》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 11107-2009 Recreational diving services - Requirements for training programmes on enriched air nitrox (EAN) diving《娱乐潜水服务 高氧潜水(EAN)训练程序要求》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO11107:2009ICS 03.080.30; 03.200; 97.220.40NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDRecreationaldiving services Requirements fortraining programmeson enriched air nitrox(EAN) divingThis British Standardwas published under theauthority of the Standard

2、sPolicy and StrategyCommittee on 31 July 2009 BSI 2009ISBN 978 0 580 62621 0Amendments/corrigenda issued since publicationDate CommentsBS ISO 11107:2009National forewordThis British Standard is the UK implementation of ISO 11107:2009.The UK participation in its preparation was entrusted to Technical

3、Committee SVS/2/4, Recreational diving services.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a

4、 British Standard cannot confer immunityfrom legal obligations.BS ISO 11107:2009Reference numberISO 11107:2009(E)ISO 2009INTERNATIONAL STANDARD ISO11107First edition2009-06-15Recreational diving services Requirements for training programmes on enriched air nitrox (EAN) diving Services relatifs la pl

5、onge de loisirs Exigences pour les programmes dentranement relatifs lair enrichi au nitrox BS ISO 11107:2009ISO 11107:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the

6、 typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Ad

7、obe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the u

8、nlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electr

9、onic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.or

10、g Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 11107:2009ISO 11107:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of prepa

11、ring International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in l

12、iaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task o

13、f technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention i

14、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11107 was prepared by Technical Committee ISO/TC 228, Tourism and related services. BS ISO 11107:2009ISO 111

15、07:2009(E) iv ISO 2009 All rights reservedIntroduction This International Standard specifies minimum requirements; it does not preclude the provision of additional training or the assessment by a service provider of additional competences. This International Standard represents a tool by which to co

16、mpare existing (or future) qualifications of scuba divers who wish to dive with enriched air nitrox (EAN). BS ISO 11107:2009INTERNATIONAL STANDARD ISO 11107:2009(E) ISO 2009 All rights reserved 1Recreational diving services Requirements for training programmes on enriched air nitrox (EAN) diving 1 S

17、cope This International Standard specifies the level of competence required of a scuba diver in order to be awarded an enriched air nitrox (EAN) diver certification by a training organization. This International Standard also specifies the conditions under which training is to be provided, which sup

18、plement the general requirements for recreational diving services specified in ISO 24803. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition

19、 of the referenced document (including any amendments) applies. ISO 24801-2, Recreational diving services Safety related minimum requirements for the training of recreational scuba divers Part 2: Level 2 Autonomous diver ISO 24802-1, Recreational diving services Safety related minimum requirements f

20、or the training of scuba instructors Part 1: Level 1 ISO 24802-2, Recreational diving services Safety related minimum requirements for the training of scuba instructors Part 2: Level 2 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 training

21、organization entity providing recreational scuba diving training systems and certification, and which is responsible for the implementation and quality management of scuba diver training NOTE The entity can include scuba diving federations and scuba diver training agencies. 3.2 certification confirm

22、ation that a student has completed scuba diver training that fulfils all requirements in accordance with this International Standard, as issued by training organizations 3.3 scuba instructor individual qualified in accordance with ISO 24802-1 or ISO 24802-2, as appropriate BS ISO 11107:2009ISO 11107

23、:2009(E) 2 ISO 2009 All rights reserved3.4 open water body of water significantly larger than a swimming pool, which offers conditions typical of a natural body of water 3.5 enriched air nitrox EAN breathable mixture of nitrogen and oxygen with more than 21 % oxygen content, which may contain trace

24、gases at levels no higher than those found in normal air 4 Competences of a certified enriched air nitrox diver The training programme shall ensure that, when assessed in accordance with Clause 10, scuba divers are qualified to plan, conduct and log EAN open-water, no-decompression dives, when accom

25、panied by another scuba diver of at least level 2 “Autonomous diver”, in accordance with ISO 24801-2; procure EAN mixes, EAN equipment and other services to engage in recreational EAN diving without supervision. The training programme does not qualify divers to make dives which require mandatory in-

26、water decompression stops or dives using more than one breathing gas and/or rebreathers. Such dives are beyond the scope of this International Standard and require additional training. 5 Prerequisites for training 5.1 Minors Documented parental or legal guardian consent shall be obtained when the ap

27、plicant is a minor. 5.2 Health requirements If training dives are to be conducted as part of the training programme, documented evidence shall be obtained that the student has been medically screened as suitable for recreational diving, by means of an appropriate questionnaire or medical examination

28、. In case of doubt, or at the scuba instructors discretion, students shall be referred to proper medical resources. If the student is not examined by a physician, the student shall be obliged to confirm by signature that he or she has understood written information given by the scuba instructor on d

29、iseases and physical conditions which may pose risks in relation to diving. Students shall be advised of the importance of appropriate regular medical examinations. 6 Required theoretical knowledge 6.1 Equipment The training programme shall ensure that students have appropriate knowledge of the phys

30、ical characteristics, operating principles, maintenance requirements and use of EAN diving equipment. This shall include at least the following: how EAN use impact diving equipment (e.g. increased oxidation and wear); the suitability of scuba equipment for use with EAN, including national and/or reg

31、ional regulations; BS ISO 11107:2009ISO 11107:2009(E) ISO 2009 All rights reserved 3 the suitability of scuba cylinders for EAN (e.g. when oxygen service may be required); EAN cylinder markings. The students should be made aware of the importance of following the recommendations of equipment manufac

32、turers regarding the use of their equipment with EAN. 6.2 Physics of diving with EAN The training programme shall ensure that students have appropriate knowledge of the physical principles of EAN and its application to diving activities. This shall include at least the following: what EAN is; partia

33、l pressures; the benefits of reduced exposure to nitrogen on decompression, e.g. equivalent air depth (EAD); EAN use and bottom time. 6.3 EAN handling risks The training programme shall ensure that students have appropriate knowledge of risks related to the handling of EAN mixtures with elevated oxy

34、gen levels. This shall include at least knowledge about factors likely to increase the risk of fire or explosion. 6.4 Medical issues The training programme shall ensure that students have appropriate knowledge of the causes, symptoms, prevention, first-aid and proper handling of EAN-related diving m

35、edical problems. This shall include at least the following: EAN and narcosis; oxygen toxicity; decompression illness. Instructions shall include why buddy teams must plan their dive in accordance with: the limits of the diver with the most conservative maximum operating depth, no decompression limit

36、, or oxygen toxicity limit. 6.5 Use of dive tables and dive computers The training programme shall ensure that students have an appropriate knowledge of using dive tables, dive computers and/or dive planning software, including: how to determine oxygen partial pressure (PO2); managing exposure to ni

37、trogen, e.g. by using the equivalent air depth concept; how to determine the maximum operating depth for a particular EAN mixture, taking into consideration its oxygen content; how to use EAN dive tables and/or a EAN-programmable dive computer to plan and execute single and repetitive dives. BS ISO

38、11107:2009ISO 11107:2009(E) 4 ISO 2009 All rights reserved7 Practical skills The training programme shall ensure that students are able to perform the following practical skills: how to use an oxygen analyzer to determine the oxygen content in an EAN blend; how to fill out cylinder content tags/stic

39、kers; how to complete and sign a filling stations EAN fill log, including maximum operating depth and oxygen content. 8 Practical training parameters If the training programme includes open water dives using EAN as a breathing gas, the maximum PO2 shall not exceed 160 kPa (1,6 bar). 9 Scuba instruct

40、ors Scuba instructors teaching the training programme and assessing students in accordance with this International Standard shall have completed formal training for EAN training programmes. 10 Certification The training programme may be conducted in conjunction with scuba diver training in accordanc

41、e with ISO 24801-2, but the certification shall not be issued until such time as the student has finalized all certification requirements in accordance with ISO 24801-2. The student shall demonstrate EAN knowledge to a scuba instructor by taking and passing an oral or written examination. This exami

42、nation shall test EAN knowledge in accordance with Clause 6. The scuba instructor shall ensure that the student has the ability to analyze EAN and plan dives using EAN, prior to certification in accordance with Clause 7. NOTE Open water dives using EAN are not a requirement in order to complete the

43、training programme in accordance with this International Standard, but they are encouraged. BS ISO 11107:2009ISO 11107:2009(E) ISO 2009 All rights reserved 5Bibliography 1 ISO 24803, Recreational diving services Requirements for recreational scuba diving service providers BS ISO 11107:2009ISO 11107:

44、2009(E) ICS 03.080.30; 03.200 Price based on 5 pages ISO 2009 All rights reserved BS ISO 11107:2009This page has been intentionally left blank BS ISO11107:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI i

45、s the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure th

46、at they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the

47、identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, internati

48、onal and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Li