BS ISO 10290-1994 Textiles - Cotton yarns - Specifications《纺织品 棉纱 规范》.pdf

《BS ISO 10290-1994 Textiles - Cotton yarns - Specifications《纺织品 棉纱 规范》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10290-1994 Textiles - Cotton yarns - Specifications《纺织品 棉纱 规范》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10290:1993 Implementation of ISO 10290:1993 Textiles Cotton yarns Specifications UDC 677.072.33:677.017BSISO10290:1993 This British Standard, having been prepared under the directionof the Textiles and Clothing Standards Policy Committee, was published underthe authority of t

2、he Standards Board and comesintoeffect on 15 March 1994 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference TCM/28 Draft for comment 92/40331 DC ISBN 0 580 23028 7 Committees responsible for this British Standard The preparation of this British Standard

3、was entrusted by the Textiles and Clothing Standards Policy Committee (TCM/-) to Technical Committee TCM/28, upon which the following bodies were represented: British Association of Clothing Machinery Manufacturers British Clothing Industry Association British Polyolefin Textiles Association British

4、 Textile Confederation Consumer Policy Committee of BSI Knitting Industries Federation Ltd. Linen Sewing Thread Manufacturers Association SATRA Footwear Technology Centre Textile Institute Amendments issued since publication Amd. No. Date CommentsBSISO10290:1993 BSI 12-1999 i Contents Page Committee

5、s responsible Inside front cover National foreword ii Foreword iii Text of ISO 10290 1BSISO10290:1993 ii BSI 12-1999 National foreword This British Standard reproduces verbatim ISO10290:1993 and implements it as the UK national standard. This British Standard is published under the direction of the

6、Textiles and Clothing Standards Policy Committee whose Technical Committee TCM/63 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor rela

7、ted international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK146LE. A British Standard does not purport to include all the ne

8、cessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the

9、ISO title page, pages ii to iv, pages 1 to 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO10290:1993(E) ii BSI 12-1999 Contents Page Foreword iii 1 Scope 1 2

10、Normative references 1 3 Definitions 1 4 Requirements 2 5 Marking 2 6 Sampling and inspection 2 7 Quality control 2 Annex A (informative) Examples of cotton yarn specifications 3 Annex B (informative) 3 Table A.1 3 Descriptors: Textiles, cotton, yarns, cotton spun yarns, carded yarns, combed yarns,

11、specifications, performance evaluation, tests, marking, common quality standards.ISO10290:1993(E) BSI 12-1999 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standard

12、s is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take

13、part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International St

14、andard requires approval by at least75% of the member bodies casting a vote. International Standard ISO10290 was prepared by Technical Committee ISO/TC38, Textiles, Sub-Committee SC22, Product specifications. Annex A and Annex B of this International Standard are for information only.iv blankISO1029

15、0:1993(E) BSI 12-1999 1 1 Scope This International Standard specifies criteria, with relevant test methods, to be applied in describing single spun grey cotton yarns, which are widely used in international trade. 2 Normative references The following standards contain provisions which, through refere

16、nce in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the m

17、ost recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 2:1973, Textiles Designation of the direction of twist in yarns and related products. ISO 1144:1973, Textiles Universal system for designating linear densit

18、y (Tex System). ISO 2060:1972, Textiles Yarn from packages Determination of linear density (mass per unit length) Skein method. ISO 2061:1972, Textiles Determination of twist in yarns Direct counting method. ISO 2062:1993, Textiles Yarns from packages Determination of single-end breaking force and e

19、longation at break. ISO 3951:1989, Sampling procedures and charts for inspection by variables for percent nonconforming. ISO 6741-1:1989, Textiles Fibres and yarns Determination of commercial mass of consignments Part 1: Mass determination and calculations. ISO 6939:1988, Textiles Yarns from package

20、s Method of test for breaking strength of yarn by the skein method. 3 Definitions For the purposes of this International Standard, the following definitions apply. 3.1 linear density mass per unit length of a yarn it is expressed in tex 3.2 tex number of grams per kilometre of yarn 3.3 breaking load

21、 maximum load (or force) applied to a specimen in a tensile test carried to rupture for yarns, it is preferably expressed in centinewtons 3.4 elongation at break increase in length of a specimen produced by the breaking load it is usually expressed as a percentage of the original nominal length 3.5

22、tenacity ratio of the tension to the linear density of an unstrained specimen it is usually expressed in centinewtons per tex 3.6 breaking tenacity ratio of a yarns breaking load to its linear density it is usually expressed in centinewtons per tex NOTE 1For specimens of known linear density, the br

23、eaking tenacity can be obtained directly from tensile-testing machines which can be suitable adjusted to indicate tenacity instead of breaking load. 3.7 twist number of turns about the axis of a length equal to the nominal gauge length before untwisting twist is expressed preferably in turns per met

24、re, but may also be expressed in turns per centimetre 3.8 twist factor a measure of the “twist hardness” of a yarn, calculated by multiplying the number of turns per unit length by the square root of the linear density in a direct system it is typically expressed in turns per centimetre (tex) 1/2 3.

25、9 grey cotton yarn yarn as it leaves the spinning frame, without any bleaching, dyeing or finishing treatment, and in the case of open-end yarn, waxed or unwaxedISO10290:1993(E) 2 BSI 12-1999 4 Requirements The performance requirements and tolerances applied to yarn for use in the textile industry s

26、hall be agreed between the purchaser and manufacturer. Examples, for information only, are given in Annex A. 4.1 Yarn linear density The linear density of the yarn shall be determined in accordance with ISO2060 (seealso ISO1144). 4.2 Evenness The evenness of the yarn shall be determined, for example

27、 in accordance with ASTMD1425. 4.3 Breaking load/tenacity and elongation at break The breaking load of single strands and elongation at break shall be determined in accordance with ISO2062. 4.4 Skein breaking strength The skein breaking strength of the yarn shall be determined in accordance with ISO

28、6939. 4.5 Yarn twist The number of turns per unit length shall be determined in accordance with ISO2061. The direction for twist shall be indicated by the capital letter “S” or “Z” as specified in ISO2. 4.6 Moisture regain Moisture regain shall be determined in accordance with ISO6741-1. 5 Marking T

29、he details of marking shall be subject to agreement between purchaser and manufacturer. Where appropriate, individual units shall be identified. It is recommended that purchaser and manufacturer select from the following list: a) name of material; b) linear density; c) lot number; d) manufacturers n

30、ame, trademark or other means of identification; e) spinning method used, e.g. ring or rotor; f) individual package size/mass; g) mass of consignment, in accordance with ISO 6741-1; h) whether carded or combed; i) whether waxed or unwaxed. 6 Sampling and inspection The sampling procedure for inspect

31、ion shall be agreed between purchaser and manufacturer. In the absence of any agreed sampling procedure, reference shall be made to ISO3951. 7 Quality control It is recommended that manufacturers use ISO8402 and operate quality control procedures in line with ISO9000, ISO9001, ISO9002, ISO9003 and I

32、SO9004 in order to assure that they are able to manufacture yarns consistently to the required standard.ISO10290:1993(E) BSI 12-1999 3 Annex A (informative) Examples of cotton yarn specifications It must be emphasized that the data shown in Table A.1 are given ONLY AS EXAMPLES, to illustrate the for

33、mat which might be used to set out specifications for cotton yarn. They have been selected on the basis of available data to be as realistic as possible, but cannot in any way serve to replace requirements which may be contained in a commercial contract. Table A.1 Annex B (informative) 1 ISO 139:197

34、3, Textiles Standard atmospheres for conditioning and testing. 2 ISO 1139:1973, Textiles Designation of yarns. 3 ISO 2947:1973, Textiles Integrated conversion table for replacing traditional yarn numbers by rounded values in the Tex System. 4 ISO/TR 8091:1983, Textiles Twist factor related to the Te

35、x System. 5 ISO 6741-2:1987, Textiles Fibres and yarns Determination of commercial mass of consignments Part 2: Methods for obtaining laboratory samples. 6 ISO 8402:1986, Quality Vocabulary. 7 ISO 9000:1987, Quality management and quality assurance standards Guidelines for selection and use. 8 ISO 9

36、001:1987, Quality systems Model for quality assurance in design/development, production, installation and servicing. 9 ISO 9002:1987, Quality systems Model for quality assurance in production and installation. 10 ISO 9003:1987, Quality systems Model for quality assurance in final inspection and test

37、. 11 ISO 9004:1987, Quality management and quality system elements Guidelines. 12 ASTM D 1425-89, Standard test method for unevenness of textile strands using capacitance testing equipment. 13 ASTM D 2255-87, Standard test method for grading cotton yarns for appearance. Characteristic Specification

38、Carded ring-spun for weaving Combed ring-spun for knitting Carded rotor-spun for weaving Nominal count (tex) Nominal count Number English (Ne) 37 16 20 30 37 16 % CV aof count b Permitted% deviation from a nominal count 4 max. 3 max. 4 max. 3 max. 4 max. 3 max. Twist factor (tex) Direction of twist

39、Permitted% deviation of twist 38 S or Z 5 max. 34 S or Z 5 max. 42 Z 5 max. Breaking tenacity b(cN/tex) Evenness% CV a(determined in accordance with, for example, ASTMD1425) 13 min. 17,5 max. 13 min. 14,5 max. 9,5 min. 16 max. Appearance (determined in accordance with, for example, ASTM D 2255) Grad

40、e D or better Grade C or better Grade C or better a CV = coefficient of variation. b Useful guidelines for these properties may be found in Uster Statistics 1989, published by Zellweger Uster A.G.,8610 Uster/ZH, Switzerland.BS ISO 10290:1993 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandar

41、dsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandard

42、s should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical co

43、mmittee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BS

44、I, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise

45、 requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and s

46、ervices. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:0

47、2089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a

48、 retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade desi

49、gnations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.