BS IEC IEEE 62271-37-082-2012 High-voltage switchgear and controlgear Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers《高压开关设备和.pdf

《BS IEC IEEE 62271-37-082-2012 High-voltage switchgear and controlgear Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers《高压开关设备和.pdf》由会员分享，可在线阅读，更多相关《BS IEC IEEE 62271-37-082-2012 High-voltage switchgear and controlgear Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers《高压开关设备和.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationHigh-voltage switchgear and controlgearPart 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakersBS IEC 62271-37-082:2012BS IEC/IEEE 62271-37-082:2012Incorporating corrigendum January 2014BS IEC/IEEE 62271-37-082:2012

2、BRITISH STANDARDNational forewordThis British Standard is the UK implementation of IEC/IEEE 62271-37-082:2012 incorporating corrigendum January 2014.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by IEC/IEEE corrigendum January 2014 i

3、s indicated in the text by .The UK participation in its preparation was entrusted by Technical Committee PEL/17, Switchgear, controlgear, and HV-LV co-ordination to Subcommittee PEL/17/1, High-voltage switchgear and controlgear.A list of organizations represented on this subcommittee can be obtained

4、 on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 85693 8ICS 29.130.10Compliance with a

5、 British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012.Amendments/corrigenda issued since publicationDate Text affected28 February 2014 Implementation of IEC/IEEE corri

6、gendum January 2014. This publication has been renumbered as BS IEC/IEEE 62271-37-082:2012 to reflect the identifier of the core text.IEC/IEEE 62271-37-082 Edition 1.0 2012-10 INTERNATIONAL STANDARD High-voltage switchgear and controlgear Part 37-082: Standard practice for the measurement of sound p

7、ressure levels on alternating current circuit-breakers INTERNATIONAL ELECTROTECHNICAL COMMISSION R ICS 29.130.10 PRICE CODE ISBN 978-2-83220-406-1 Warning! Make sure that you obtained this publication from an authorized distributor. BS IEC 62271-37-082:2012BS IEC/IEEE 62271-37-082:2012 2 62271-37-08

8、2 IEC/IEEE:2012(E) CONTENTS FOREWORD . 4 1 Scope . 6 2 Terms and definitions . 6 3 Acoustical environment 9 Ambient noise . 9 3.1Wind conditions . 9 3.2Air condition 9 3.3Local topography . 9 3.44 Instrumentation 10 Sound level meter . 10 4.1General . 10 4.1.1Preferred sound level meter. 10 4.1.2Pea

9、k and time average 10 4.1.3Calibration capability . 10 4.2Supplemental instrumentation . 10 4.35 Type test methods 10 General test requirements . 10 5.1General . 10 5.1.1Sound pressure level measurements . 10 5.1.2No load conditions . 11 5.1.3Impulse noise measurement 11 5.1.4Location of microphone

10、. 11 5.1.5Orientation of microphone . 11 5.1.6Near-field measurements 11 5.2Type of noise measurements . 11 5.2.1Near field measurement with fully opened doors 12 5.2.2Near field measurement with fully closed doors . 12 5.2.3Far-field measurements . 12 5.3Type of noise measurements . 12 5.3.1Far fie

11、ld measurement . 13 5.3.2Equivalent data . 14 5.3.3Data 14 5.4General . 14 5.4.1Circuit-breaker being tested . 14 5.4.2Environment 15 5.4.3Instrumentation 15 5.4.4Acoustical data 15 5.4.5Miscellaneous 15 5.4.6Report . 15 5.5Completeness of the report 15 5.5.1Conversion 15 5.5.26 Field test methods 1

12、7 General . 17 6.1Wind conditions . 17 6.2Circuit-breaker operating conditions 17 6.3Operating conditions 17 6.3.1BS IEC 62271-37-082:2012BS IEC/IEEE 62271-37-082:201262271-37-082 IEC/IEEE:2012(E) 2 2 62271-37-082 IEC/IEEE:2012(E) CONTENTS FOREWORD . 4 1 Scope . 6 2 Terms and definitions . 6 3 Acous

13、tical environment 9 Ambient noise . 9 3.1Wind conditions . 9 3.2Air condition 9 3.3Local topography . 9 3.44 Instrumentation 10 Sound level meter . 10 4.1General . 10 4.1.1Preferred sound level meter. 10 4.1.2Peak and time average 10 4.1.3Calibration capability . 10 4.2Supplemental instrumentation .

14、 10 4.35 Type test methods 10 General test requirements . 10 5.1General . 10 5.1.1Sound pressure level measurements . 10 5.1.2No load conditions . 11 5.1.3Impulse noise measurement 11 5.1.4Location of microphone . 11 5.1.5Orientation of microphone . 11 5.1.6Near-field measurements 11 5.2Type of nois

15、e measurements . 11 5.2.1Near field measurement with fully opened doors 12 5.2.2Near field measurement with fully closed doors . 12 5.2.3Far-field measurements . 12 5.3Type of noise measurements . 12 5.3.1Far field measurement . 13 5.3.2Equivalent data . 14 5.3.3Data 14 5.4General . 14 5.4.1Circuit-

16、breaker being tested . 14 5.4.2Environment 15 5.4.3Instrumentation 15 5.4.4Acoustical data 15 5.4.5Miscellaneous 15 5.4.6Report . 15 5.5Completeness of the report 15 5.5.1Conversion 15 5.5.26 Field test methods 17 General . 17 6.1Wind conditions . 17 6.2Circuit-breaker operating conditions 17 6.3Ope

17、rating conditions 17 6.3.1BS IEC 62271-37-082:201262271-37-082 IEC/IEEE:2012(E) 3 Specific conditions. 17 6.3.2Measurements . 17 6.3.3Microphone locations 17 6.47 Measurements to be taken . 18 Limitation of the measurement 18 7.1Measurement of impulsive noise 18 7.2Data and report . 18 7.3Bibliograp

18、hy 19 Figure 1 Location of measurement points with respect to the reference parallelepiped for near field measurements . 12 Figure 2 Location of measurement points with respect to circuit-breaker outline for far field measurements . 14 Figure 3 Measurement of sound pressure levels of a.c. circuit-br

19、eakers Record form 16 Table 1 Wind conditions for sound measurements . 9 BS IEC 62271-37-082:2012BS IEC/IEEE 62271-37-082:201262271-37-082 IEC/IEEE:2012(E) 3 4 62271-37-082 IEC/IEEE:2012(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 37-082: Standard prac

20、tice for the measurement of sound pressure levels on alternating current circuit-breakers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC i

21、s to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) an

22、d Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the

23、 IEC also participate in this preparation. IEEE Standards documents are developed within IEEE Societies and Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, which brings together volunt

24、eers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of IEEE and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independentl

25、y evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of IEEE Standards documents is wholly voluntary. IEEE documents are made available for use subject to important notices and legal disclaimers (see http:/standards.ieee.org/IPR/disclaimers.html for more

26、 information). IEC collaborates closely with IEEE in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technic

27、al committee has representation from all interested IEC National Committees. The formal decisions of IEEE on technical matters, once consensus within IEEE Societies and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially interested parties who indicat

28、e interest in reviewing the proposed standard. Final approval of the IEEE standards document is given by the IEEE Standards Association (IEEE-SA) Standards Board. 3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National Committees/IEEE Societie

29、s in that sense. While all reasonable efforts are made to ensure that the technical content of IEC/IEEE Publications is accurate, IEC or IEEE cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, I

30、EC National Committees undertake to apply IEC Publications (including IEC/IEEE Publications) transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional publication shall be clear

31、ly indicated in the latter. 5) IEC and IEEE do not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible for any services carried out by independent certif

32、ication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or IEEE or their directors, employees, servants or agents including individual experts and members of technical committees and IEC National Committees, or volunteers

33、of IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board, for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the

34、publication, use of, or reliance upon, this IEC/IEEE Publication or any other IEC or IEEE Publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is dr

35、awn to the possibility that implementation of this IEC/IEEE Publication may require use of material covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. IEC or IEEE shall not be held re

36、sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patent Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in an

37、y licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. BS IEC 62271-37-082:2012BS IEC/IEEE 62271-37-082:20126

38、2271-37-082 IEC/IEEE:2012(E) 4 4 62271-37-082 IEC/IEEE:2012(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers FOREWORD 1) The International Electro

39、technical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To

40、 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Natio

41、nal Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEEE Standards documents are developed within IEEE Societies and Standards Coordinat

42、ing Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of IEEE

43、and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of IEEE Standards documents

44、is wholly voluntary. IEEE documents are made available for use subject to important notices and legal disclaimers (see http:/standards.ieee.org/IPR/disclaimers.html for more information). IEC collaborates closely with IEEE in accordance with conditions determined by agreement between the two organiz

45、ations. 2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. The formal decisions of IEEE on technical matters,

46、 once consensus within IEEE Societies and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially interested parties who indicate interest in reviewing the proposed standard. Final approval of the IEEE standards document is given by the IEEE Standards Ass

47、ociation (IEEE-SA) Standards Board. 3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National Committees/IEEE Societies in that sense. While all reasonable efforts are made to ensure that the technical content of IEC/IEEE Publications is accurat

48、e, IEC or IEEE cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications (including IEC/IEEE Publications) transparently to the maximum exten

49、t possible in their national and regional publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC and IEEE do not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible for any services carried out by independent certification bodies. 6) All users should ensur