BS EN ISO 11199-2-2005 Walking aids manipulated by both arms - Requirements and test methods - Rollators《双臂操作的助步器 要求和试验方法 滚动器》.pdf

《BS EN ISO 11199-2-2005 Walking aids manipulated by both arms - Requirements and test methods - Rollators《双臂操作的助步器 要求和试验方法 滚动器》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 11199-2-2005 Walking aids manipulated by both arms - Requirements and test methods - Rollators《双臂操作的助步器 要求和试验方法 滚动器》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 11199-2:2005 Walking aids manipulated by both arms Requirements and test methods Part 2: Rollators The European Standard EN ISO 11199-2:2005 has the status of a British Standard ICS 11.180.10 BS EN ISO 11199-2:2005 This British Standard was published under the authority of

2、 the Standards Policy and Strategy Committee on 10 May 2005 BSI 10 May 2005 ISBN 0 580 45992 6 National foreword This British Standard is the official English language version of EN ISO 11199-2:2005. It is identical with ISO 11199-2:2005. It supersedes BS EN ISO 11199-2:1999 which is withdrawn. The

3、UK participation in its preparation was entrusted to Technical Committee CH/173, Technical systems and aids for disabled or handicapped persons, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The Br

4、itish Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards O

5、nline. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the respon

6、sible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cove

7、r, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 22, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EU

8、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11199-2 April 2005 ICS 11.180.10 Supersedes EN ISO 11199-2:1999 English version Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2005) Aides la marche manipules avec les deux bras - Exigences

9、 et mthodes dessai - Partie 2: Dambulateurs (ISO 11199-2:2005) Gehhilfen fr beidarmige Handhabung - Anforderungen und Prfverfahren - Teil 2: Rollatoren (ISO 11199-2:2005) This European Standard was approved by CEN on 14 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regula

10、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Eur

11、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the nat

12、ional standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EU

13、ROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11199-2:2005: EI NES

14、O 11-991:2002( 5E) 2 Foreword This document (EN ISO 11199-2:2005) has been prepared by Technical Committee ISO/TC 173 “Technical systems and aids for disabled or handicapped persons“ in collaboration with Technical Committee CEN/TC 293 “Technical aids for disabled persons“, the secretariat of which

15、is held by SIS. This document supersedes EN ISO 11199-2:1999. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by O

16、ctober 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ital

17、y, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 11199-2:2005 has been approved by CEN as EN ISO 11199-2:2005 without any modifications. ENISO111992:2005 Reference num

18、ber ISO 11199-2:2005(E) OSI 5002INTERNATIONAL STANDARD ISO 11199-2 Second edition 2005-04-15 Walking aids manipulated by both arms Requirements and test methods Part 2: Rollators Aides la marche manipules avec les deux bras Exigences et mthodes dessai Partie 2: Dambulateurs ENISO111992:2005IS-99111

19、O2:(5002E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot g

20、nhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh

21、 Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb ne

22、vwo. ISO 5002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i yd

23、obn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 5002 Allr ithgsr esedevrENISO111992:2005IS-99111 O2:(5002E) I SO 5002 All irthgs ersedevr

24、iiiContents Page Foreword iv 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 1 4 Requirements 7 4.1 Manoeuvrability. 7 4.2 Stability 7 4.3 Brakes 7 4.4 Handgrip. 8 4.5 Leg section and tip . 8 4.6 Resting seat. 8 4.7 Mechanical durability 8 4.8 Adjusting devices . 8 4.9 Folding mechanis

25、m 9 4.10 Adjustment of handles . 9 4.11 Materials and finish. 9 5 Test methods. 9 5.1 General. 9 5.2 Sampling and inspection 9 5.3 Forward-direction stability test . 10 5.4 Backward-direction stability test. 11 5.5 Sideway-direction stability test . 11 5.6 Accessory equipment. 12 5.7 Brake tests. 13

26、 5.8 Handgrip test . 14 5.9 Rubber tip test. 14 5.10 Resting seat test . 14 5.11 Static loading test . 14 5.12 Fatigue test 16 5.13 Final inspection. 17 6 Information supplied by the manufacturer. 17 6.1 General. 17 6.2 Information marked on the product and / or accessories 17 6.3 Documentation 18 7

27、 Test report 18 Annex A (informative) Recommendations . 19 Bibliography . 22 ENISO111992:2005ISO 11199-2:2005(E) iv I SO 5002 All irthgs ersedevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of p

28、reparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental,

29、in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main ta

30、sk of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attenti

31、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11199-2 was prepared by Technical Committee ISO/TC 173, Assistive products for persons with disability.

32、This second edition cancels and replaces the first edition (ISO 11199-2:1999), which has been technically revised. ISO 11199 consists of the following parts, under the general title Walking aids manipulated by both arms Requirements and test methods: Part 1: Walking frames Part 2: Rollators Part 3:

33、Walking tables ENISO111992:2005INTENRATIONAL TSANDADR IS-99111 O2:(5002E)I SO 5002 All irthgs ersedevr 1Walking aids manipulated by both arms Requirements and test methods Part 2: Rollators 1 Scope This part of ISO 11199 specifies requirements and methods of testing the static stability braking capa

34、bilities, static strength and fatigue of rollators being used as walking aids with wheels, manipulated by the hands, without accessories, unless specified in the particular test procedure. This part of ISO 11199 also gives requirements relating to safety, ergonomics, performance, and information sup

35、plied by the manufacturer including marking and labelling. The requirements and tests are based on every-day usage of rollators as walking aids, for a maximum user mass as specified by the manufacturer. This part of ISO 11199 includes rollators specified for a user mass of no less than 35 kg. This p

36、art of ISO 11199 is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISO 11199-3 is applicable. NOTE Recommendations further to the requirements given in this part of ISO 11199 are given in an Annex A. 2 Normative references The following referenc

37、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 9999:2002, Technical aids for persons with disabilities Classificat

38、ion and terminology EN 1041, Information supplied by the manufacturer with medical devices 3 Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1 rollator walking aids with built-in handgrips and three or more legs of which two or more are having whe

39、els, which provide support whilst walking See Figure 1. NOTE Rollators include equipment with a seat for resting, as specified in ISO 9999:2002, Classification No. 12 06 06. ENISO111992:2005ISO 11199-2:2005(E) 2 I SO 5002 All irthgs ersedevrKey 1 rear 2 brake handle 3 height adjustment mechanism 4 f

40、olding mechanism 5 handle/handgrip 6 resting seat 7 front 8 bracing member 9 wheels Figure 1 Example of components of a rollator 3.2 user mass body mass of the person using the product as a walking aid 3.3 maximum length maximum outside dimension of a rollator when the height adjustment is at its ma

41、ximum, measured parallel to the direction of straight forward movement when the rollator is in normal use See Figure 2. 3.4 maximum width maximum outside dimension of a rollator when all adjustments are at their maximum, measured at right angles to the direction of straight forward movement when the

42、 rollator is in normal use See Figure 2. 3.5 rollator height vertical distance from the rear handgrip reference point to the ground See Figure 2. ENISO111992:2005IS-99111 O2:(5002E) I SO 5002 All irthgs ersedevr 33.6 turning width minimum distance between two parallel limiting walls in between which

43、 a rollator can be turned 180 around its own central vertical axis See Figure 2. NOTE The adjustments are to be at their maximum Key 1 turning width 2 width between handles 3 tip 4 maximum length 5 maximum width 6 height Figure 2 Nomenclature of maximum dimensions for a rollator ENISO111992:2005IS-9

44、9111 O2:(5002E) 4 I SO 5002 All irthgs ersedevr3.7 folded dimensions height, width and length of the rollator measured with the rollator folded together without the use of tools, all adjustments at their minimum 3.8 handgrip that part of the rollator which is intended by the manufacturer to be held

45、by the hand when the rollator is in use See Figure 3. 3.9 handle that part of the rollator to which the handgrip is attached 3.10 front handgrip reference point that point on the upper surface of the handgrip located 30 mm inwards from the front end of the handgrip length See Figure 3. 3.11 rear han

46、dgrip reference point that point on the upper surface of the handgrip located 30 mm inwards from the rear end of the handgrip length See Figure 3. 3.12 handgrip length dimension of the handgrip measured longitudinally where the hand rests See Figure 3. NOTE Where the front end or the rear end of the

47、 handgrip is not clear, the full length of the handgrip that may comfortably support the mass of the user is defined as the handgrip length. 3.13 handgrip width outside dimension of the handgrip measured horizontally at the thickest point where the hand rests See Figure 3. 3.14 brake grip distance d

48、istance measured, with the brake handle in the neutral position, at the midpoint of the handgrip length and normal to the centreline of the handle tubing, from the upper surface of the handgrip to the lower surface of the brake handle See Figure 4. ENISO111992:2005ISO 11199-2:2005(E) I SO 5002 All i

49、rthgs ersedevr 5Dimensions in millimetres Key 1 rear handgrip reference point 2 front handgrip reference point 3 handgrip length 4 handgrip width 5 front Figure 3 Detailed drawing of a handgrip Key 1 brake grip distance 2 rear handgrip reference point 3 front handgrip reference point 4 front Figure 4 Brake grip distance ENISO111992:2005IS-99111 O2:(5002E) 6 I SO 5002 All irthgs ersedevr3.15 tips