BS EN ISO 5183-2-2001 Resistance welding equipment - Electrode adaptors male taper 1 10 - Parallel shank fixing for end-thrust electrodes《电阻焊接设备 外锥度1 10电极适配器 端推力电极用平行杆固定件》.pdf

《BS EN ISO 5183-2-2001 Resistance welding equipment - Electrode adaptors male taper 1 10 - Parallel shank fixing for end-thrust electrodes《电阻焊接设备 外锥度1 10电极适配器 端推力电极用平行杆固定件》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 5183-2-2001 Resistance welding equipment - Electrode adaptors male taper 1 10 - Parallel shank fixing for end-thrust electrodes《电阻焊接设备 外锥度1 10电极适配器 端推力电极用平行杆固定件》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 5183-2:2001 Resistance spot welding Electrode adaptors, male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes The European Standard EN ISO 5183-2:2001 has the status of a British Standard ICS 25.160.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED

2、 BY COPYRIGHT LAWBS EN ISO 5183-2:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 8 November 2001 BSI 8 November 2001 ISBN 0 580 38512 4 N

3、ational foreword This British Standard is the official English language version of EN ISO 5183-2:2001. It is identical with ISO 5183-2:2000. It supersedes BS EN 25183-2:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/29, Resistance welding, w

4、hich has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue un

5、der the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct

6、application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informe

7、d; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, EN ISO foreword page, ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and

8、 a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO51832 October2001 ICS25.160.30 SupersedesEN251832:1991 Englishversion Resistance

9、spotweldingElectrodeadaptors,maletaper1:10 Part2:Parallelshankfixingforendthrustelectrodes(ISO5183 2:2000) EquipementdesoudageparrsistanceAllonges dlectrodeemboutamovible,cnemle1:10Partie2: Emmanchementcylindriquepourpousseenbout(ISO 51832:2000) WiderstandspunktschweienElektrodenschftemit Auenkegel1

10、:10Teil2:ZylindrischeBefestigungfr geradeBeanspruchung(ISO51832:2000) ThisEuropeanStandardwasapprovedbyCENon4October2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodate

11、listsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguag

12、eandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMI

13、TTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO51832:2001EINESO3815:2(1002E) 2 Foreword ThetextoftheInternationalSt

14、andardfromTechnicalCommitteeISO/TC44“Weldingandallied processes“oftheInternationalOrganizationforStandardization(ISO)hasbeentakenoverasan EuropeanStandardbyTechnicalCommitteeCEN/TC121“Welding“,thesecretariatofwhichisheldby DS. ThisEuropeanStandardreplacesEN251832:1991. ThisEuropeanStandardshallbegiv

15、enthestatusofanationalstandard,eitherbypublicationofan identicaltextorbyendorsement,atthelatestbyApril2002,andconflictingnationalstandardsshallbe withdrawnatthelatestbyApril2002. NOTEFROMCMC TheforewordissusceptibletobeamendedonreceptionoftheGermanlanguageversion. Theconfirmedoramendedforeword,andwh

16、enappropriate,thenormativeannexZAforthereferencesto internationalpublicationswiththeirrelevantEuropeanpublicationswillbecirculatedwiththeGermanversion. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthe followingcountriesareboundtoimplementthisEuropeanStandard:Austri

17、a,Belgium,CzechRepublic, Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands, Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdom. Endorsementnotice ThetextoftheInternationalStandardISO51832:2000hasbeenapprovedbyCENasaEuropean Standardwithoutanymodification. EN

18、ISO51832:2001 Reference number ISO 5183-2:2000(E) INTERNATIONAL STANDARD ISO 5183-2 Second edition 2000-12-01 Resistance spot welding Electrode adaptors, male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes quipement de soudage par rsistance Allonges dlectrode embout amovible, cne

19、 mle 1:10 Partie 2: Emmanchement cylindrique pour pousse en bout ENISO51832:2001ii ENISO51832:2001 ISO -38152:(0002)Eiii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International S

20、tandards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, als

21、o take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopt

22、ed by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 5183 may be the subject

23、of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 5183-2 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 6, Resistance welding. This second edition cancels and replaces the first

24、edition (ISO 5183-2:1988), which has been technically revised. ISO 5183 consists of the following parts, under the general title Resistance spot welding Electrode adaptors, male taper 1:10: Part 1: Conical fixing, taper 1:10 Part 2: Parallel shank fixing for end thrust electrodes ENISO51832:2001 ENISO51832:2001