BS EN 61753-081-2-2014 Fibre optic interconnecting devices and passive components Performance standard Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for.pdf

《BS EN 61753-081-2-2014 Fibre optic interconnecting devices and passive components Performance standard Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for.pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-081-2-2014 Fibre optic interconnecting devices and passive components Performance standard Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C Controlled environmentsBS EN 61753-081-2:2014National forewordThis British Standard is the UK i

2、mplementation of EN 61753-081-2:2014. Itis identical to IEC 61753-081-2:2014.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on th

3、is committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 81976 6ICS 3

4、3.180.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 617

5、53-081-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-081-2 August 2014 ICS English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Con

6、trolled environments (IEC 61753-081-2:2014) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 081-2: Dispositifs DWDM 1 x N de milieu dchelle fibres optiques unimodales, non connectoriss, pour catgorie C - Environnements contrls (CEI 61753-081-2:2014)

7、Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 081-2: Nicht mit Steckverbinder versehene mittelgroe Einmoden-Lichtwellenleiter-1-x-N-DWDM-Bauteile fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-081-2:2014) This European Standard was approved by CENELE

8、C on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

9、 may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language an

10、d notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger

11、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisat

12、ion Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-081-2:2014 E BS EN 61753-081-2:2014EN

13、61753-081-2:2014 - 2 - Foreword The text of document 86B/3646/CDV, future edition 2 of IEC 61753-081-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-081-2

14、:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-03-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 201

15、7-05-29 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-081-2:2014

16、 was approved by CENELEC as a European Standard without any modification. BS EN 61753-081-2:2014- 3 - EN 61753-081-2:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normative

17、ly referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by comm

18、on modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-2-50 2012 Optical fibres - Part 2-50: Product specifica

19、tions - Sectional specification for class B single-mode fibres EN 60793-2-50 2013 IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies EN 60794-2-50 - IEC 61300-2-1 - Fibre optic interconnecting d

20、evices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 -

21、IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - +AC 2011 IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests

22、- High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement

23、procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interco

24、nnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for str

25、ain relief EN 61300-2-42 - BS EN 61753-081-2:2014EN 61753-081-2:2014 - 4 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN

26、 61300-3-2 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurem

27、ent procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - +EN 61300-3-20:2001/corrigendum Mar. 2002 2002 IEC 61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Exa

28、minations and measurements - Spectral transfer characteristics of DWDM devices EN 61300-3-29 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for

29、 passive optical components EN 61300-3-32 - IEC 61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple EN 61300-3-38 - IEC 61753-021-2 - Fibre optic

30、 interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 - IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generi

31、c specification EN 62074-1 - ITU series Pulse code modulation (PCM) of voice frequencies - series BS EN 61753-081-2:2014 2 IEC 61753-081-2:2014 IEC 2014 CONTENTS 1 Scope 5 2 Normative references 5 3 Terms and definitions 6 4 Test conditions General 7 5 Test report . 7 6 Reference components 7 7 Perf

32、ormance requirements 8 7.1 Dimensions . 8 7.2 Test details and requirements . 8 Annex A (normative) Sample size 16 Bibliography 17 Table 1 Spectral bands for single-mode systems a7 Table 2 Test and requirements for type A (Gaussian passband profile) 8 Table 3 Test and requirements for type B (Flat-t

33、op passband profile) . 11 Table 4 Environmental test for all types . 14 Table A.1 Sample size . 16 BS EN 61753-081-2:2014IEC 61753-081-2:2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 081-2: Non-connectorized single-mode fibre optic middle-scale

34、1 N DWDM devices for category C Controlled environments 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 N (16 N 64) DWDM (dense wavelength division multiplexing) device with channel spacing of 50 GHz, 100

35、 GHz or 200 GHz needs to satisfy in order to be categorized as meeting the requirements of category C Controlled environment. The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements cover devices with single-mode non-connectorize

36、d pigtails and no circuit board. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen

37、ced document (including any amendments) applies. IEC 60793-2-50:2012, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60794-2-50, Optical fibre cables Part 2-50: Indoor cables Family specification for simplex and duplex cables for use in te

38、rminated cable assemblies IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: T

39、ests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High opti

40、cal power IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature

41、 endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-081-2:2014 6 IEC 61753-081-2:2014 IEC 2014 IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basi

42、c test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-3-2, Fibre optic interconnecting devices and passive co

43、mponents Basic test and measurement procedures Part 3-2: Examinations and measurements Polarization dependence of attenuation in a a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations a

44、nd measurements Return loss IEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Directivity of fibre optic branching devices IEC 61300-3-29, Fibre optic interconnecting devices and passive component

45、s Basic test and measurement procedures Part 3-29: Examinations and measurements Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components IEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic test and measurement procedur

46、es Part 3-32: Examinations and measurements Polarization mode dispersion measurement for passive optical components IEC 61300-3-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: Examinations and measurements Group delay, chromatic dispers

47、ion and phase ripple IEC 61753-021-2, Fibre optic interconnecting devices and passive components performance standard Part 021-2: Fibre optic connectors terminated on single mode fibre for category C Controlled environment IEC 62074-1, Fibre optic WDM devices Part 1: Generic specification ITU-T Reco

48、mmendation G series Supplement 39, Optical system design and engineering considerations ITU-T Recommendation G.692, Optical interfaces for multichannel systems with optical amplifiers ITU-T Recommendation G.694.1, Spectral grids for WDM applications: DWDM frequency grid 3 Terms and definitions For t

49、he purposes of this document, the following terms and definitions, as well as those given in IEC 62074-1, apply. 3.1 middle-scale 1 N DWDM device wavelength-selective branching device which performs the function both of a wavelength multiplexer and demultiplexer with DWDM channel spacing of 50 GHz, 100 GHz or 200 GHz and a number of channels (N) eq