BS EN 61221-2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications《石油产品及润滑剂 三芳基磷酸酯涡轮机控制液(ISO-L-TCD类) 规范》.pdf

《BS EN 61221-2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications《石油产品及润滑剂 三芳基磷酸酯涡轮机控制液(ISO-L-TCD类) 规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61221-2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications《石油产品及润滑剂 三芳基磷酸酯涡轮机控制液(ISO-L-TCD类) 规范》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61221:2004 Petroleum products and lubricants Triaryl phosphate ester turbine control fluids (category ISO-L- TCD) Specifications The European Standard EN 61221:2004 has the status of a British Standard ICS 29.120; 75.120 BS EN 61221:2004 This British Standard was published und

2、er the authority of the Standards Policy and Strategy Committee on 8 November 2004 BSI 8 November 2004 ISBN 0 580 44704 9 National foreword This British Standard is the official English language version of EN 61221:2004. It is identical with IEC 61221:2004. It supersedes BS EN 61221:1996 which will

3、be withdrawn on 2007-09-01. The UK participation in its preparation was entrusted to Technical Committee GEL/10, Fluids for electrotechnical applications, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-referen

4、ces The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British S

5、tandards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to

6、the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, t

7、he EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61221 NORME EUROPENNE EUROPISCHE NORM October 2004 CE

8、NELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved wo

9、rldwide for CENELEC members. Ref. No. EN 61221:2004 E ICS 29.120; 75.120 Supersedes EN 61221:1995English version Petroleum products and lubricants Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications (IEC 61221:2004) Produits ptroliers et lubrifiants Fluides de rgulat

10、ion de turbines base desters de triarylphosphate (catgorie ISO-L-TCD) Spcifications (CEI 61221:2004) Minerallerzeugnisse und Schmiermittel - Triaryl-Phosphatester-Turbinen- Steuerflssigkeiten (Kategorie ISO-L-TCD) Anforderungen (IEC 61221:2004) This European Standard was approved by CENELEC on 2004-

11、09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be ob

12、tained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Ce

13、ntral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether

14、lands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 62212:1400 - - 2 Foreword The text of document 10/583/FDIS, future edition 2 of IEC 61221, prepared by IEC TC 10, Fluids for electrotechnical applications, was submitted to the IEC-CENELEC parallel

15、 vote and was approved by CENELEC as EN 61221 on 2004-09-01. This European Standard supersedes EN 61221:1995. The main changes with respect to EN 61221:1995 include: a) introduction of new tests to define fire resistance, namely the Manifold Ignition and Wick flame persistence tests; b) flame persis

16、tence tests; c) introduction of a pour point requirement; d) a change to the Sequence II foaming requirement; e) introduction of a cleanliness requirement; f) introduction of an elastomer compatibility requirement; g) use of ISO test methods equivalent to the original DIN tests. The following dates

17、were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-09-01 Annex ZA has been added by CEN

18、ELEC. _ Endorsement notice The text of the International Standard IEC 61221:2004 was approved by CENELEC as a European Standard without any modification. _ Page2 EN61221:200462211 IE2:C 300 3 PETROLEUM PRODUCTS AND LUBRICANTS TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) SPECIF

19、ICATIONS 1 Scope This International Standard specifies the characteristics of unused triaryl phosphate ester fluids for turbine governor controls and other hydraulic systems in electrical power stations. Fluids used in this application are classified under category TCD of ISO 6743-5. 2 Normative ref

20、erences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60247, Insulating liquids Measurement

21、 of relative permittivity, dielectric dissipation factor (factor tan ) and d.c. resistivity IEC 60978, Maintenance and use guide for triaryl phosphate ester turbine control fluids ISO 760, Determination of water Karl Fischer method (General method) ISO 2592, Determination of flash and fire points Cl

22、eveland open cup method ISO 3016, Petroleum products Determination of pour point ISO 3104, Petroleum products Transparent and opaque liquids Determination of kinematic viscosity and calculation of dynamic viscosity ISO 3170, Petroleum liquids Manual sampling ISO 3448, Industrial liquid lubricants IS

23、O viscosity classification ISO 3675, Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method ISO 4259 Petroleum products Determination and application of precision data in relation to methods of test ISO 4406, Hydraulic fluid power Fluids Method for coding

24、 the level of contamination by solid particles Page3 EN61221:200461221 IEC:2003 4 ISO 6072, Hydraulic fluid power Compatibility between fluids and standard elastomeric materials ISO 6247, Petroleum products Determination of foaming characteristics of lubricating oils ISO 6614, Petroleum products Det

25、ermination of water separability of petroleum oils and synthetic fluids ISO 6619, Petroleum products and lubricants Neutralisation number Potentiometric titration method ISO 6743-5, Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines) ISO 9120, Petrol

26、eum and related products Determination of air-release properties of steam turbine and other oils Impinger method ISO 11500, Hydraulic fluid power Determination of particulate contamination by automatic counting using the light extinction principle ISO 12185, Crude petroleum and petroleum products De

27、termination of density Oscillating U-tube method EN 14832, Petroleum and related products Determination of the oxidation stability and corrosivity of phosphate ester fluids 1EN 14833, Petroleum and related products Determination of hydrolytic stability of phosphate ester fluids 2 ISO 14935, Petroleu

28、m and related products Determination of wick flame persistence of fire resistant fluids ISO 15597, Petroleum and related products Determination of chlorine and bromine content Wavelength dispersive X-ray fluorescence spectrometry ISO 20823, Petroleum and related products- Determination of the flamma

29、bility characteristics of fluids in contact with hot surfaces Manifold ignition test 3 General These fluids are difficult to ignite and show little tendency to propagate a flame, but cannot be considered as non-flammable. Such fluids should only be filled into systems designed for their use and wher

30、e recommended by the equipment manufacturer. Regular maintenance of these fluids is important. Detailed information on their maintenance, handling and associated safety procedures is given in IEC 60978 or can be obtained from the suppliers of these fluids. 1EN 14832 is the future CENELEC reference.

31、This publication, currently at the DIS stage, was formerly ISO 15595 and DIN 51373:1984 (see resolution 8 of ISO/TC 28 N2200). 2EN 14833 is the future CENELEC reference. This publication, currently at the DIS stage, was formerly ISO 15596 and DIN 51348:1990 (see resolution 8 of ISO/TC 28 N2200). Pag

32、e4 EN61221:200462211 IE2:C 300 5 4 Composition These products are organic phosphate esters with the organic constituents consisting entirely of aryl or substituted aryl groups. The composition of commercial fluids is complex and several different chemical types are available. Additives may be incorp

33、orated to improve stability and to reduce foaming. Use of viscosity index improvers is not permitted. Fluids may be dyed for identification purposes, if required. 5 Sampling Sampling shall be carried out on delivery in accordance with the relevant procedures described in 6.2 and 6.3 of ISO 3170. Add

34、itional information on sampling is given in IEC 60978. 6 Required characteristics The appearance of the fluid shall be clear and free from visible foreign matter when a representative sample of the fluid is examined at ambient temperature by transmitted visible light using a clear glass container of

35、 approximately 100 mm diameter. Fluids complying with this standard shall meet the limiting values in Table 1 when tested in accordance with the specified methods. 7 Precision and interpretation of test results Most of the methods of test specified in Table 1 contain a statement of the precision, i.

36、e. repeatability and reproducibility to be expected from them. In case of dispute, the procedure described in ISO 4259 which uses precision data in the interpretation of test results, shall be used. Page5 EN61221:200462211 IE2:C 300 6 Table 1 Required characteristics of unused triaryl phosphate este

37、r turbine control fluids Viscosity grade (ISO 3448) Fluid characteristics Unit 32 46 Test method Kinematic viscosity at 40 C minimum maximum Kinematic viscosity at 0 C maximum mm 2 /s mm 2 /s mm 2 /s 28,8 35,2 2 000 41,4 50,6 2 500 ISO 3104 Density at 15 C maximum kg/m 31 200 1 200 ISO 3675 or ISO 1

38、2185 Neutralization number 1maximum mg KOH/g 0,1 0,1 ISO 6619 Water content maximum g/kg 1,0 1,0 ISO 760 Pour point maximum C -15 -15 ISO 3016 Manifold ignition test 2minimum C 700 700 ISO 20823 Wick flame persistence 2maximum S 10 10 ISO 14935 Fire point minimum C 300 300 ISO 2592 Foaming character

39、istics: sequence I (24 C) maximum sequence II (93,5 C) maximum sequence III (24 C) maximum ml ml ml 150/0 30/0 150/0 150/0 30/0 150/0 ISO 6247 Air release value at 50 C Min 5 6 ISO 9120 Water separability maximum Min 15 15 ISO 6614 DC resistivity at 20 C minimum M m 50 50 IEC 60247 Chlorine content

40、maximum mg/kg 50 50 ISO 15597 Cleanliness maximum -/15/12 -/15/12 ISO 11500 3ISO 4406 3Oxidation stability Neutralization number maximum Weight change Fe maximum Weight change Cu maximum mg KOH/g mg mg 1,5 1,0 2,0 1,5 1,0 2,0 EN 14832 Hydrolytic stability: Increase in neutralization number maximum m

41、g KOH/g 0,5 0,5 EN 14833 Elastomer compatibility: 150C /168 h (FKM2) or 130 C/168 h (EPDM 1) . relative volume change 4maximum . relative hardness change 4 min/max . change in tensile strength 4. elongation at break 4% IRHD % % +15/-4 8 -20 -20 +15/-4 8 -20 -20 ISO 6072 4Page6 EN61221:200462211 IE2:

42、C 300 7 1The neutralization number method allows the determination of both total acid number and strong acid number. The requirements in this standard is for the measurement of total acid number. 2Fire resistance is also usually specified by means of spray ignition test performance but the preferred

43、 test methods are still undergoing conversion to the ISO format (future ISO 15029-2 and ISO 15029-3). Once the ISO methods have been published, this requirement will be included in the standard. However, the fire resistance of the phosphate esters used in this application is well known and can be de

44、fined ad interim by the above procedures. 3ISO 11500 is the recommended test method for counting and sizing of particles and is currently under revision. The existing version refers to the calibration of automatic counting equipment according to ISO 4402 but this standard has been replaced by ISO 11

45、171. ISO 4406 is the procedure for codifying number and size of particles in the sample. 4The limits shown for seal compatibility are for reference purposes and should not be taken as the direct basis on which elastomer compatibility is to be determined as it will depend on the purpose and condition

46、s of use. ISO 6072 is currently under revision at the FDIS stage. Page7 EN61221:200462211 IE2:C 300 8 Bibliography ISO/WD 15029-2/3, Petroleum and related products Determination of spray flame persistence of fire-resistant fluids (Part 2/3 methods to be established) ISO 11171, Hydraulic fluid power

47、Calibration of automatic particle counters for liquids _ Page8 EN61221:2004 - - 3 EN 62212:1400 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this docu

48、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Pub

49、lication Year Title EN/HD Year IEC 60247 - 1)Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity EN 60247 2004 2)IEC 60978 - 1)Maintenance and use guide for triaryl phosphate ester turbine control fluids - - ISO 760 - 1)Determination of water - K