BS EN 61146-4-1998 Video cameras (PAL SECAM NTSC) - Methods of measurement - Part 4 Automatic functions of video cameras and camera-recorders《摄像机(PAL SECAN NTSC) 测量方法 第4部分 摄像机和摄像记录.pdf

《BS EN 61146-4-1998 Video cameras (PAL SECAM NTSC) - Methods of measurement - Part 4 Automatic functions of video cameras and camera-recorders《摄像机(PAL SECAN NTSC) 测量方法 第4部分 摄像机和摄像记录.pdf》由会员分享，可在线阅读，更多相关《BS EN 61146-4-1998 Video cameras (PAL SECAM NTSC) - Methods of measurement - Part 4 Automatic functions of video cameras and camera-recorders《摄像机(PAL SECAN NTSC) 测量方法 第4部分 摄像机和摄像记录.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 61146-4:1998Video cameras (PAL/SECAM/NTSC) Methods of measurement Part 4: Automatic functions of video cameras and camera-recordersThe European Standard EN 61146-4:1998 has the status of a British StandardICS 33.160.40g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54

2、g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSIBS EN 61146-4:1998This British Standard was published under the authority o

3、f the Standards Policy and Strategy Committee on 30 December 2005 BSI 30 December 2005ISBN 0 580 46237 4National forewordThis British Standard is the official English language version of EN 61146-4:1998. It is identical with IEC 61146-4:1998.The UK participation in its preparation was entrusted to T

4、echnical Committee EPL/100, Audio, video and multimedia systems and equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publicatio

5、ns referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary

6、 provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpret

7、ation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover.The BSI copyright noti

8、ce displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61146-4NORME EUROPENNE EUROPISCHE NORM August 1998 ICS 33.160.4

9、0 Descriptors: Video equipment, motionpicture cameras, magnetoscope, characteristics, control functions, automatic, measurements, test results, testing condition, comparison, mire, illuminance, luminance, colours English version Video cameras (PAL/SECAM/NTSC) - Methods of measurement Part 4: Automat

10、ic functions of video cameras and camera-recorders (IEC 61146-4:1998) Camras vido (PAL/SECAM/NTSC) Mthodes de mesure Partie 4: Fonctions automatiques des camras video et des camscopes (CEI 61146-4:1998) Videokameras (PAL/SECAM/NTSC) Meverfahren Teil 4: Automatische Funktionen von Videokameras und Ca

11、mcordern (IEC 61146-4:1998) This European Standard was approved by CENELEC on 1998-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat

12、e lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

13、the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ire

14、land, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B -

15、 1050 Brussels 1998 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61146-4:1998 ECENELEC Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSIForeword The text of document 100C/221/FDIS, future edi

16、tion 1 of IEC 61146-4, prepared by SC 100C, Audio, video and multimedia subsystems and equipment, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61146-4 on 1998-08-01. The following dates were fixed:

17、latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1999-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2001-05-01 Annexes designated “normative“ are part of

18、 the body of the standard. In this standard, annexes A and ZA are normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61146-4:1998 was approved by CENELEC as a European Standard without any modification. _ 2 EN 61146-4:1998Licensed Copy: Wan

19、g Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSI 3 CONTENTS Page Clause 1 Scope . 5 2 Normative references 5 3 Terms and definitions 5 4 Conditions . 6 4.1 Environmental conditions . 6 4.2 Conditions of measurement 6 4.2.1 Illumination . 6 4.2.2 Shooting conditions. 6 4.2.3 Settin

20、gs of the equipment under test . 6 4.2.4 Reliability of measured results. 7 5 Method of measurement of automatic functions . 7 5.1 Automatic exposure control 7 5.1.1 Dependency on illumination level 7 5.1.2 Dependency on average brightness. 9 5.1.3 Dynamic response 12 5.2 Automatic focusing. 13 5.2.

21、1 Assessment of focusing response time 13 5.2.2 Focusing accuracy 14 5.3 Automatic white balance. 15 5.3.1 Dependency on colour temperature of illumination. 15 5.3.2 Dynamic characteristics of automatic white balance. 18 Annex A (normative) Specification of the tracking chart 20Annex 2A (normative)

22、Normative references to international publications with their corresponding European publications . 21 Figure 1 Equipment arrangement for measurement of dependency on illumination level 8 Figure 2 Equipment arrangement for measurement of dependency on average brightness 10 Figure 3 Waveform of a hor

23、izontal line for B = 27 % 11 Figure 4 Waveform of a horizontal line for B = 77 %. 11 Figure 5 Waveform of a horizontal line for B = 9 %. 11 Figure 6 Typical response (1) . 12 Figure 7 Typical response (2) . 12 Figure 8 Equipment arrangement for measurement of focusing time 13 Figure 9 Equipment arra

24、ngement for measurement of automatic white balance 16 Figure 10 Colour temperature conversion block and its specification . 17 Figure A.1 Dimensional specification of the large-sized tracking chart . 20 EN 61146-4:1998Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c)

25、BSIPage Table 1 Automatic exposure control Dependency on illumination level 9 Table 2 Automatic exposure control Dependency on average brightness 12 Table 3 Automatic focusing Assessment of focusing response time 14 Table 4 Automatic white balance Dependency on colour temperature of illumination. 18

26、 Table 5 Optical filters used for conversion of colour temperature. 19 Table A.1 Positions of equi-centred small circles and triangle markers 20 4 EN 61146-4:1998Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSIMETHODS OF MEASUREMENT Part 4: Automatic functions of

27、 video cameras and camera-recorders 1 Scope This part of IEC 61146 applies to the assessment of characteristics of automatic functions which are implemented in colour video cameras and camera-recorders. The performance to be assessed in this standard is limited to automatic functions relating to lig

28、ht input from the lens and to the electronic output from video cameras and the video camera portions of camera-recorders. This standard defines test patterns, measurement conditions, methods of measurement and the presentation of measured results so as to make possible the comparison of the measurem

29、ent results. This standard intends to provide an objective method of measurement for each characteristic of the automatic functions but the results of objective measurements may not correlate well with the subjective assessment of automatic functions. It does not specify limiting values for the vari

30、ous characteristics related to automatic functions. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 61146. At the time of publication, the editions indicated were valid. All normative documen

31、ts are subject to revision, and parties to agreements based on this part of IEC 61146 are encouraged to investigate the possibility of applying the most recent editions of the normative documents listed below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC

32、61146-1:1994, Video cameras (PAL/SECAM/NTSC) Methods of measurement Part 1: Non-broadcast single-sensor cameras ISO 8341:1989, Photography Slide projectors and filmstrip projectors Illumination test 3 Terms and definitions For the purpose of this part of IEC 61146, the following definitions apply. 3

33、.1 grey scale chart test chart which has logarithmic grey steps of = 2,2 specified in item 1 of annex A of IEC 61146-1 5 EN 61146-4:1998Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSI 6 3.2 tracking chart test chart with a radial arrangement of black and white w

34、edges (see annex A) 3.3 resolution chart test chart specified in item 4 of annex A of IEC 61146-1 3.4 uniform white chart test chart specified in item 2 of annex A of IEC 61146-1 3.5 equipment under test colour video camera and camera-recorder with electronic output(s) 4 Conditions 4.1 Environmental

35、 conditions All measurements shall be carried out within the environmental conditions as specified by the manufacturer. The environmental conditions during measurement, at least the temperature and the relative humidity, shall be reported together with the presentation of the measurement results. 4.

36、2 Conditions of measurement 4.2.1 Illumination a) The illumination of test charts should be performed by two or four spot lights depending on the characteristics to be measured. b) The correlated colour temperature of the spot light shall be 3 100 K 100 K. c) Unless otherwise specified, the illumina

37、tion level of the test chart shall be 2 000 lx 100 lx. d) The non-uniformity of the illumination shall be less than 5 %. e) The methods used for all the measurements shall be in line with the standard methods specified in ISO 8341. 4.2.2 Shooting conditions a) An optical axis of the equipment under

38、test shall coincide with a normal line of the test chart. b) Unless otherwise specified, the distance between the test chart and the equipment under test should be approximately 2 m. c) Unless otherwise specified, the zooming should be adjusted so that horizontal and vertical markers just fit the fu

39、ll frame of an under-scan monitor. 4.2.3 Settings of the equipment under test Except when otherwise indicated, the following setting shall be used: a) focus shall be adjusted for the best condition; EN 61146-4:1998Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSIb

40、) white balance shall be adjusted automatically or manually for a correlated colour temperature of 3 100 K 100 K; c) iris control of the lens may be automatic or manual; d) gain control may be automatic or manual. 4.2.4 Reliability of measured results The reliability and repeatability of measured re

41、sults may be affected by the automation processes incorporated in the equipment under measurement. Some automatic functions may exhibit instability. Therefore, averaging of data obtained by multiple measurement may be necessary if additional precision is required. 5 Method of measurement of automati

42、c functions 5.1 Automatic exposure control 5.1.1 Dependency on illumination level 5.1.1.1 Characteristics to be measured Dependency of absolute luminance signal levels and their relative deviation on illumination level. 5.1.1.2 Measurement conditions The measurements shall be conducted using the gre

43、y scale chart of = 2,2. The equipment arrangement shall be as shown in figure 1. 7 EN 61146-4:1998Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT 2006, Uncontrolled Copy, (c) BSIEN 61146-4:1998 8 LampLampNeutral density filterEquipmentundertest10 000 lxTest chartOscilloscopeUnder-scan monitorTe

44、rminated by 75 Not terminatedIEC 724/98Figure 1 Equipment arrangement for measurement of dependency on illumination level 5.1.1.3 Method of measurement a) The test chart illuminated with 10 000 lx by lamps having a correlated colour temperature of 3 100 K 100 K shall be imaged to fill the full scree

45、n. b) The luminance signal level Y (corresponding to a white part at the centre of the test chart) relative to the blanking level shall be measured with an oscilloscope. The measurements shall be conducted with the following densities D of neutral density optical filters placed in front of the lens:

46、 D = 0,0 (effective illumination of 10 000 lx); D = 0,7 (effective illumination of 2 000 lx); D = 1,4 (effective illumination of 400 lx); D = 2,1 (effective illumination of 80 lx). c) The measured results are noted as Y10 000, Y2 000, Y400and Y80. Licensed Copy: Wang Bin, na, Thu Mar 16 02:16:32 GMT

47、 2006, Uncontrolled Copy, (c) BSId) The dependency of luminance signal level on the illumination level shall be calculated by the following equation: RYYnn=2 0001 100 % where n = 10 000, 400 and 80. 5.1.1.4 Presentation of results The absolute luminance signal levels and their relative deviations sh

48、all be reported as in table 1. Table 1 Automatic exposure control Dependency on illumination level 10 000 lx 2 000 lx 400 lx 80 lx Absolute level (mV) Y10 000Y2 000Y400Y80Relative deviation (%) R10 0000 R400R80NOTE Measured results will not directly relate to a practical automatic function. The resu

49、lt should be understood as showing a tendency of the equipment under test. 5.1.2 Dependency on average brightness 5.1.2.1 Characteristics to be measured Luminance signal level and its relative deviation as a function of average brightness of shooting target. 5.1.2.2 Conditions of measurement The equipment arrangement shall be as shown in figure 2 with the grey scale chart having = 2,2. The test chart surrounded by a white or b