BS EN 60966-2-6-2017 Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz IEC 61169-.pdf

《BS EN 60966-2-6-2017 Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz IEC 61169-.pdf》由会员分享，可在线阅读，更多相关《BS EN 60966-2-6-2017 Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz IEC 61169-.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、Radio frequency and coaxial cable assembliesPart 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectorsBS EN 60966-2-6:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National foreword

2、This British Standard is the UK implementation of EN 60966-2-6:2017. It isidentical to IEC 60966-2-6:2016. It supersedes BS EN 60966-2-6:2009 whichis withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors

3、 and accessories for communication and signalling.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British St

4、andards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 84842 1ICS 33.120.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2017

5、.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60966-2-6:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60966-2-6 February 2017 ICS 33.120.10 Supersedes EN 60966-2-6:2009 English Version Radio frequency and coaxial cable assemblies - Part 2-6: Detail

6、 specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors (IEC 60966-2-6:2016) Cordons coaxiaux et cordons pour frquences radiolectriques - Partie 2-6: Spcification particulire pour cordons de connexion de rcepteurs radio ou TV - Pla

7、ge de frquences de 0 MHz 3 000 MHz, connecteurs IEC 61169-24 (IEC 60966-2-6:2016) Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-6: Bauartspezifikation fr konfektionierte Kabel fr Ton- und Fernsehrundfunkempfnger - Frequenzbereich 0 MHz bis 3 000 MHz, Steckverbinder nach IEC 61169-24 (IEC 6

8、0966-2-6:2016) This European Standard was approved by CENELEC on 2016-11-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b

9、ibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the

10、 responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia,

11、 Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Commit

12、tee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENEL

13、EC Members. Ref. No. EN 60966-2-6:2017 E BS EN 60966-2-6:2017EN 60966-2-6:2017 2 European foreword The text of document 46/593/FDIS, future edition 4 of IEC 60966-2-6, prepared by IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories“ was submitted

14、to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60966-2-6:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-08-30 latest date by which the nationa

15、l standards conflicting with the document have to be withdrawn (dow) 2019-11-30 This document supersedes EN 60966-2-6:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for ident

16、ifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60966-2-6:2016 was approved by CENELEC as a European Standard without any modification. BS EN 60966-2-6:2017EN 60966-2-6:2017 3 Annex ZA (normative) Normative references to international publications

17、with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docum

18、ent (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenel

19、ec.eu. Publication Year Title EN/HD Year IEC 60728-4 - Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks EN 60728-4 - IEC 60966-1 1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specificat

20、ion - General requirements and test methods EN 60966-1 1999 IEC 60966-2-1 2008 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies EN 60966-2-1 2009 IEC 60966-2-2 2003 Radio frequency and coaxial cable assemblies - Part 2-2: Blank de

21、tail specification for flexible coaxial cable assemblies EN 60966-2-2 2003 IEC 61169-24 - Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) EN 61169-24 - IEC 61196-1-110 - Coaxia

22、l communication cables - Part 1-110: Electrical test methods - Test for continuity - - IEC 61196-6 - Coaxial communication cables - Part 6: Sectional specification for CATV drop cables - - IEC 62153-4-7 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Tes

23、t method for measuring of transfer impedance ZTand screening attenuation asor coupling attenuation acof connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method EN 62153-4-7 - BS EN 60966-2-6:2017 2 IEC 60966-2-6:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 BS EN 60966-

24、2-6:2017IEC 60966-2-6:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors FOREWORD 1) The International Elec

25、trotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields.

26、 To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Na

27、tional Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization

28、(ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representatio

29、n from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot

30、be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications.

31、Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access

32、 to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including indivi

33、dual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, t

34、his IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of t

35、his IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60966-2-6 has been prepared by IEC technical committee 46: Cables, wires, waveguides, RF connectors, RF and microwave passive component

36、s and accessories. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the return loss requirements and the insertion lo

37、ss requirements are matched to the relevant cables, b) screening effectiveness shall be measured according to IEC 62153-4-7, triaxial method, c) screening class A+ was introduced. BS EN 60966-2-6:2017 4 IEC 60966-2-6:2016 IEC 2016 The text of this standard is based on the following documents: FDIS R

38、eport on voting 46/593/FDIS 46/626/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This detail specification is to be read with

39、 IEC 60966-1:1999, with IEC 60966-2-1:2008 and with IEC 60966-2-2:2003. A list of all parts of the IEC 60966 series, under the general title: Radio frequency and coaxial cable assemblies, can be found on the IEC website. The committee has decided that the contents of this publication will remain unc

40、hanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of t

41、his publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 60966-2-6:2017IEC 60966-2-6:2016 IEC 2016 5 INTRODUCTION This part of IEC 60966 is a detail spe

42、cification which applies to coaxial cables described in the IEC 61196 series. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily F (see IEC 61169-24). These cable assemblies are used as described in IEC 60728-4. This part of IEC 60966 gives

43、 subfamily requirements and severities which shall be applied. Under qualification approval, the qualification will be conducted in accordance with 12.2 of IEC 60966-2-1:2008 taking into account the specified variants. Only the tests whose results might depend on the variants will be repeated Under

44、capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM (capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted o

45、n delivered products, all other tests will be performed on CQCs as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM. Reference documents IEC 60728-4, Cable networks for television signals, sound signals and interactive services Part 4: Passive wideband equipment for coaxial cable networ

46、ks IEC 60966-1:1999, Radio frequency and coaxial cable assemblies Part 1: Generic specification General requirements and test methods IEC 60966-2-1:2008, Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for flexible coaxial cable assemblies IEC 60966-2-2:2003, Radio fre

47、quency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies IEC 61169-24, Radio-frequency connectors Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) IEC 611

48、96-1-110, Coaxial communication cables Part 1-110: Electrical test methods Test for continuity IEC 61196-6, Coaxial communication cables Part 6:Sectional specification for CATV drop cables IEC 62153-4-7, Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test met

49、hod for measuring the transfer impedance ZTand screening attenuation aS or coupling attenuation aCof connectors and assemblies up to and above 3 GHz Triaxial tube in tube method BS EN 60966-2-6:2017 6 IEC 60966-2-6:2016 IEC 2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors 1 Prepared by IEC TC 46 2 Document No. 60966