BS EN 13166-2012 Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification《建筑用隔热产品 工厂制酚醛泡沫 (PF) 产品 规范》.pdf

《BS EN 13166-2012 Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification《建筑用隔热产品 工厂制酚醛泡沫 (PF) 产品 规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13166-2012 Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification《建筑用隔热产品 工厂制酚醛泡沫 (PF) 产品 规范》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13166:2012Thermal insulation products for buildings Factory made phenolic foam (PF) products SpecificationCopyright European Committee for Standardization Provided by IHS u

2、nder license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13166:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13166:2012. It supersedes BS EN 13166:2008, which is withdrawn.The UK participation in its pr

3、eparation was entrusted to T e c h n i c a l C o m m i t t e e P R I / 7 2 / 3 , P h e n o l F o r m a l d e h y d e .A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contr

4、act. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 69981 8 ICS 91.100.60 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the

5、authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fro

6、m IHS-,-,-BS EN 13166:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13166 November 2012 ICS 91.100.60 Supersedes EN 13166:2008English Version Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification Produits isolants thermiques pour le btiment -

7、 Produits manufacturs en mousse phnolique (PF) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation This European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whic

8、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eur

9、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members a

10、re the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, R

11、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any mean

12、s reserved worldwide for CEN national Members. Ref. No. EN 13166:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13166:2012EN 13166:2012 (E) 2 Contents Page Foreword

13、 41 Scope 62 Normative references 63 Terms, definitions, symbols, units and abbreviated terms .74 Requirements 105 Test methods . 176 Designation code 207 Evaluation of conformity 218 Marking and labelling . 21Annex A (normative) Determination of the declared values of thermal resistance and thermal

14、 conductivity . 23Annex B (normative) Initial type testing (ITT) and factory production control (FPC) . 25Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity . 29Annex D (informative) Additional properties . 34Annex E (normative) PF multi-layered therm

15、al insulation products 35Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 37Bibliography . 45Tables Table 1 Tolerances for length and width . 12Table 2 Classes for thickness tolerances . 12Table 3 Tolerances for deviation f

16、rom flatness . 13Table 4 Dimensional stability under specified temperature and humidity conditions . 14Table 5 Levels for compressive strength 14Table 7 Levels for short term water absorption by partial immersion . 16Table 8 Levels for long term water absorption by partial immersion 16Table 9 Test m

17、ethods, specimens and conditions 19Table A.1 Values for k for one side 90 % tolerance interval with a confidence level of 90 % . 24Table B.1 Minimum number of tests for ITT and minimum product testing frequencies 25Table B.2 Minimum product testing frequencies for the reaction to fire characteristic

18、s . 27Table C.1 Test times for product thicknesses . 31Table C.2 Increments to be added to accelerated aged values of thermal conductivity to obtain the time averaged value over 25 years . 32Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 34Table ZA.1 Relevant cl

19、auses for factory made phenolic foam products and intended use 38Table ZA.2 Systems of attestation of conformity 39Table ZA.3.1 Assignment of evaluation of conformity tasks for products under system 1 for reaction to fire and system 3 for other characteristics 40Copyright European Committee for Stan

20、dardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13166:2012EN 13166:2012 (E) 3 Table ZA.3.2 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reacti

21、on to fire . 41Figures Figure ZA.1 Example CE marking information 44Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13166:2012EN 13166:2012 (E) 4 Foreword This document (EN

22、 13166:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

23、y May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent r

24、ights. This standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.

25、 This document supersedes EN 13166:2008. Compared with EN 13166:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on

26、 some editorial and technical content. This includes the limiting of the use of the slicing method for ageing in Annex C to unfaced and open-faced products and the clearer definition of how the ageing techniques should be applied to various types of PF products; d) addition of links to EN 15715, The

27、rmal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. This standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriat

28、e. In pursuance of Resolution BT20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which co

29、me within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for bui

30、ldings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repr

31、oduction or networking permitted without license from IHS-,-,-BS EN 13166:2012EN 13166:2012 (E) 5 EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products S

32、pecification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB products) Specification EN 13170, Thermal insulation products for buildings Factory made pr

33、oducts of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life of thermal insulation products exceeds by far the energy used and emission

34、s made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finlan

35、d, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for S

36、tandardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13166:2012EN 13166:2012 (E) 6 1 Scope This European Standard specifies the requirements for factory made phenolic foam products, with or without facings or co

37、atings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards and laminates. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products

38、 is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular

39、application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,40 m2K/W or a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This standard

40、 does not cover in-situ thermal insulation products, products intended to be used for the thermal insulation of building equipment and industrial installations (covered by EN 14314 3). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document an

41、d are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN

42、823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products

43、for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory

44、 conditions (25 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 160

45、7, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12086:1997, Thermal insulating products for building a

46、pplications Determination of water vapour transmission properties Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13166:2012EN 13166:2012 (E) 7 EN 12087, Thermal insulating

47、 products for building applications Determination of long term water absorption by immersion EN 12089:1997, Thermal insulating products for building applications Determination of bending behaviour EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium un

48、der specified temperature and humidity conditions EN 12667:2001, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick prod