BS EN 12673-1999 Water quality - Gas chromatographic determination of some selected chlorophenols in water《水质 水中选定氯酚的气相色谱测定》.pdf

《BS EN 12673-1999 Water quality - Gas chromatographic determination of some selected chlorophenols in water《水质 水中选定氯酚的气相色谱测定》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12673-1999 Water quality - Gas chromatographic determination of some selected chlorophenols in water《水质 水中选定氯酚的气相色谱测定》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 12673:1999 BS 6068-

2、2.65: 1999 The European Standard EN 12673:1998 has the status of a British Standard ICS 13.060.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Water quality Gas chromatographic determination of some selected chlorophenols in waterThis British Standard, having been prepared

3、under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 1999 BSI 06-1999 ISBN 0 580 30998 3 BS EN 12673:1999 Amendments issued since publication Amd. No. Date Comments National foreword This Bri

4、tish Standard is the English language version of EN 12673:1998. The UK participation in its preparation was entrusted by Technical Committee EH/3, Water quality, to Subcommittee EH/3/2, Physical, chemical and biochemical methods, which has the responsibility to: aid enquirers to understand the text;

5、 present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommitt

6、ee can be obtained on request to its secretary. BS EN 12673 is one of a series of standards on water quality, others of which have been, or will be, published as Sections of BS 6068. This standard has therefore been given the secondary identifier BS 6068-2.65. The various Sections of BS 6068 are com

7、prised within Parts 1 to 7, which, together with Part 0, are listed below. Part 0 Introduction Part 1 Glossary Part 2 Physical, chemical and biochemical methods Part 3 Radiological methods Part 4 Microbiological methods Part 5 Biological methods Part 6 Sampling Part 7 Precision and accuracy NOTE The

8、 tests described in this British Standard should only be carried out by suitably qualified persons with an appropriate level of chemical expertise. Standard chemical procedures should be followed throughout. Cross-references The British Standards which implement international or European publication

9、s referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions

10、 of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an

11、inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nati

12、onal Members. Ref. No. EN 12673:1998 E EUROPEAN STANDARD EN 12673 NORME EUROPE ENNE EUROPA ISCHE NORM December 1998 ICS 13.060.01 Descriptors: water tests, water, quality, water pollution, chemical analysis, determination of content, phenols, chromatographic analysis, gas chromatography, extraction

13、English version Water quality Gas chromatographic determination of some selected chlorophenols in water Qualite de leau Dosage par chromatographie en phase gazeuse de certains chlorophe nols dans les eaux Wasserbeschaffenheit Gaschromatographische Bestimmung einiger ausgewa hlter Chlorphenole in Was

14、ser This European Standard was approved by CEN on 26 November 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica

15、l references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN me

16、mber into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Por

17、tugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 12673:1998 BSI 06-1999 Foreword This European Standard has been prepared by Technical Committee CEN/TC 230, Water analysis, the Secretariat of which is held by DIN. This European Standard shall be given the status of a national standard,

18、 either by publication of an identical text or by endorsement, at the latest by June 1999, and conflicting national standards shall be withdrawn at the latest by June 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to

19、 implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Annexes designated “informative” are only given for information. In t

20、his standard annexes A to G are informative. It is absolutely essential that tests conducted according to this standard are carried out by suitably qualified staff.Page 3 EN 12673:1998 BSI 06-1999 1 Scope This European Standard describes the gas chromatographic determination of 19 chlorophenols (2-,

21、 3-, and 4-chlorophenol, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-dichlorophenol, 2,3,4-, 2,3,5-, 2,3,6-, 2,4,5-, 2,4,6 and 3,4,5-trichlorophenol, 2,3,4,5-, 2,3,4,6-, and 2,3,5,6-tetrachlorophenol and pentachlorophenol) in drinking water, groundwater, rainwater, waste water, sea water and surface water.

22、 This standard describes an acetylation followed by a liquid/liquid extraction and determination by gas chromatography and electron capture detection or mass selective detection. The method is validated for drinking water, surface water and waste water, but may be used for all above mentioned types

23、of water. With this method chlorophenols can be determined over a range of concentrations from 0,1mg/l to 1 mg/l, depending on the quantity of sample used and the component sensitivity (level of chlorination) (see annex A). In some cases complete separation of isomers cannot be achieved. Then the su

24、m is reported. This method may be applicable to other halogenated phenolic compounds, provided the method is validated for each case. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at

25、the appropriate places in the text and the publications are listed hereafter. For dated references subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of th

26、e publication referred to applies. ISO 5667-5:1991, Water quality Sampling Part 5: Guidance on sampling of drinking water and water used for food and beverage processing. ISO 5667-6:1990, Water quality Sampling Part 6: Guidance on sampling of rivers and streams. ISO 5667-8:1993, Water quality Sampli

27、ng Part 8: Guidance on sampling of wet deposition. ISO 5667-9:1992, Water quality Sampling Part 9: Guidance on sampling from marine waters. ISO 5667-10:1992, Water quality Sampling Part 10: Guidance on sampling from waste waters. ISO 5667-11:1993, Water quality Sampling Part 11: Guidance on sampling

28、 from ground waters. 3 Definitions For the purpose of this European Standard the following definition applies. 3.1 chlorophenol compound having an aromatic nucleus carrying one hydroxyl group and from one to five chlorine atoms 4 Principle Chlorophenols present in the aqueous samples are derivatized

29、 with acetic anhydride to their corresponding acetates. The derivatives formed are extracted from the sample with hexane. The hexane fraction is analysed by gas chromatography with electron capture detection or mass selective detection. Depending on the sample type pretreatment involves acid-base pa

30、rtition prior to the derivatization step. 5 Interferences Surfactants, emulsifiers, higher concentrations of polar solvents and other phenolic substances can affect the extractive derivatization step. Suspended particles in the water can also interfere and reduce the recovery. A second liquid phase

31、in the water (e.g. mineral oil compounds, highly volatile halogenated hydrocarbons, emulsified fats and waxes) disturbs sampling, sample preparation and the enrichment. In those cases the examination is restricted to the aqueous phase and the portion of the non-aqueous phase is reported separately.

32、6 Reagents WARNING The use of this European Standard may involve hazardous materials, operations and equipment. This standard does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health

33、practices and determine the applicability of regulatory limitations prior to use. 6.1 General requirements All reagents shall be of such a purity that they do not give rise to significant interfering peaks in the gas chromatographic analysis of the extracts. This shall be verified for each batch of

34、material by running procedural blanks with each batch of samples analyzed. Reagents shall be stored in all glass containers with glass stoppers or with polytetrafluoroethylene (PTFE) lined caps. 6.2 Gas chromatographic gases, including helium, argon/methane, nitrogen or hydrogen. They shall be of a

35、purity as recommended by the gas chromatograph manufacturer. 6.3 Ethanol,C 2 H 5 OH. 6.4 n-Hexane,C 6 H 14 . 6.5 Potassium carbonate solution, c(K 2 CO 3 ) = 1,0 mol/l. 6.6 Potassium carbonate solution, c(K 2 CO 3 ) = 0,1 mol/l. 6.7 Acetic anhydride,C 4 H 6 O 3 . NOTE Impurities in the acetic anhydr

36、ide may affect the recovery. In that case it is possible to purify acetic anhydride by distillation.Page 4 EN 12673:1998 BSI 06-1999 6.8 Toluene,C 7 H 8 . 6.9 Phosphoric acid, c(H 3 PO 4 ) = 0,5 mol/l. 6.10 Sodium sulfate,N a 2 SO 4 , anhydrous, neutral. NOTE Some batches of sodium sulfate have been

37、 found to be alkaline. In these circumstances it is possible to wash with methanol containing 0,5 ml concentrated hydrochloric acid per litre and to dry on a steam bath before roasting in a muffle furnace (7.6) at 5008C 208C for 4 h 0,5 h. 6.11 Sodium hydroxide, c(NaOH) = 0,1 mol/l. 6.12 Sodium thio

38、sulfate pentahydrate, (Na 2 S 2 O 3 5H 2 O), crystals or a 10 % (m/m) solution. 6.13 2-chlorophenol,C 6 H 5 OCl. 6.14 3-chlorophenol,C 6 H 5 OCl. 6.15 4-chlorophenol,C 6 H 5 OCl. 6.16 2,3-dichlorophenol,C 6 H 4 OCl 2 . 6.17 2,4-dichlorophenol,C 6 H 4 OCl 2 . 6.18 2,5-dichlorophenol,C 6 H 4 OCl 2 . 6

39、.19 2,6-dichlorophenol,C 6 H 4 OCl 2 . 6.20 3,4-dichlorophenol,C 6 H 4 OCl 2 . 6.21 3,5-dichlorophenol,C 6 H 4 OCl 2 . 6.22 2,3,4-trichlorophenol,C 6 H 3 OCl 3 . 6.23 2,3,5-trichlorophenol,C 6 H 3 OCl 3 . 6.24 2,3,6-trichlorophenol,C 6 H 3 OCl 3 . 6.25 2,4,5-trichlorophenol,C 6 H 3 OCl 3 . 6.26 2,4,

40、6-trichlorophenol,C 6 H 3 OCl 3 . 6.27 3,4,5-trichlorophenol,C 6 H 3 OCl 3 . 6.28 2,3,4,5-tetrachlorophenol,C 6 H 2 OCl 4 . 6.29 2,3,4,6-tetrachlorophenol,C 6 H 2 OCl 4 . 6.30 2,3,5,6-tetrachlorophenol,C 6 H 2 OCl 4 . 6.31 Pentachlorophenol,C 6 Cl 5 OH. 6.32 Standard solutions of chlorophenols 6.32.

41、1 Internal standard solutions Prepare solutions of at least two internal standards in ethanol (see 6.3). For electron capture detection the following internal standard can be used: 2,4-dibromophenol, C 6 H 4 OBr 2 ; 2,6-dibromophenol, C 6 H 4 OBr 2 ; 2,3,6-trichlorophenol (see 6.24), C 6 H 3 OCl 3 ;

42、 2,4,6-tribromophenol, C 6 H 3 OBr 3 . For mass selective detection similar labelled compounds can be used. NOTE The two internal standards are used as a control for the analytical procedure. The choice of the two internal standards should reflect the anticipated occurrence of the chlorophenols in t

43、he sample (e.g. if dichlorophenols are expected 2,4-dibromophenol and 2,6-dibromophenol should be used). Prepare a mixed standard of two component solutions in such a concentration that if a small volume is added to a sample, the amount of the internal standards gives peak heights on the chromatogra

44、m in the upper part of the linear working range. Typically a concentration of 10mg/ml can be used. Confirm their concentration prior to use. 6.32.2 Stock solutions Prepare stock solutions of the chlorophenols by weighing each compound (6.13 to 6.31) and dissolving it in ethanol (6.3). Typical concen

45、trations of the stock solutions are given in annex B. Alternatively, commercially available standard solutions can be used. Confirm the concentrations. NOTE 1 Confirmation may be accomplished by spectrometric methods (e.g. UV spectrometry) or comparison with a standard of known concentration or from

46、 another source. NOTE 2 Stock solutions are stable for at least half a year when stored in the dark at 48C. At a temperature of2188C they are stable for at least one year. 6.32.3 Intermediate standards Prepare this mixed standard solution by dilution of the stock solutions (6.32.2). Suitable concent

47、rations are given in annex B. The intermediate standards should be prepared freshly every month. 6.32.4 Working standards Prepare a minimum of five different concentrations by suitable dilutions of the intermediate solution (6.32.3) with ethanol (6.3). Suitable concentrations are given in annex B. T

48、he working standards may be used for 5 days. 7 Apparatus 7.1 General requirements Standard laboratory glassware cleaned to eliminate all interferences. NOTE Heating to a temperature above 1508C before use assists in freeing glassware from possible contaminations. This procedure should not be used fo

49、r volumetric bottles. Also an alkaline washing procedure can be used. 7.2 Sample bottles, all glass, with glass stoppers or with PTFE lined caps. A random bottle per batch shall be checked for interfering contamination by running a blank determination prior to use (see 9.5). 7.3 Flasks with ground stopper, glass, 100 ml. 7.4 Capillary gas chromatograph, equipped with an injector system which minimizes decomposition of the sample (e.g. on-column or glass-lined injector), an electron capture detector or mass selective