BS EN 1143-2-2014 Secure storage units Requirements classification and methods of tests for resistance to burglary Deposit systems《安全存储装置 防盗检验的要求、分类和方法 储蓄系统》.pdf

《BS EN 1143-2-2014 Secure storage units Requirements classification and methods of tests for resistance to burglary Deposit systems《安全存储装置 防盗检验的要求、分类和方法 储蓄系统》.pdf》由会员分享，可在线阅读，更多相关《BS EN 1143-2-2014 Secure storage units Requirements classification and methods of tests for resistance to burglary Deposit systems《安全存储装置 防盗检验的要求、分类和方法 储蓄系统》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 1143-2:2014Secure storage units Requirements, classificationand methods of tests forresistance to burglaryPart 2: Deposit systemsBS EN 1143-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1143-2:2014. Itsupersedes BS EN 1143

2、-2:2001 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GW/2, Secure storage of cash, valuables and data media.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include

3、all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 77388 4ICS 13.310Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stan

4、dard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2014.Amendments issued since publicationDate Text affectedBS EN 1143-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1143-2 May 2014 ICS 13.310 Supersedes EN 1143-2:2001English Version Secure st

5、orage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems Units de stockage en lieux srs - Exigences, classification et mthodes dessai pour la rsistance leffraction - Partie 2: Systmes de dpt Wertbehltnisse - Anforderungen, Klassifizierung u

6、nd Methoden zur Prfung des Widerstandes gegen Einbruchdiebstahl - Teil 2: Deposit-Systeme This European Standard was approved by CEN on 20 December 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta

7、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, G

8、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croa

9、tia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and U

10、nited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.

11、EN 1143-2:2014 EBS EN 1143-2:2014EN 1143-2:2014 (E) 2 Contents Page Foreword 3 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Classification and requirements 9 5 Technical documentation 13 6 Test specimen . 15 7 Test program . 16 8 Tool attack tests 18 9 Access tool

12、attack tests . 23 10 Deposit tool attack tests (removal of deposits) . 27 11 Fixing system tool attack tests . 36 12 Test report and test records 40 13 Marking 41 Annex A (informative) Examples of different design of deposit systems 42 Annex B (informative) Examples of integrated and distributed dep

13、osit system . 43 B.1 Integrated deposit system . 43 B.2 Different distributed deposit systems 44 Annex C (informative) Additional tools for deposit tool attack tests 48 Annex D (informative) Structure of test clauses . 50 BS EN 1143-2:2014EN 1143-2:2014 (E) 3 Foreword This document (EN 1143-2:2014)

14、has been prepared by Technical Committee CEN/TC 263 “Secure storage of cash, valuables and data media”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Nov

15、ember 2014, and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pat

16、ent rights. This document supersedes EN 1143-2:2001. The main changes of EN 1143-2:2014 compared to EN 1143-2:2001 are as follows: a) Editorial - Restructuring and rewording The text has been restructured and reworded to make the standard easier to read and understand. Mainly the test clauses of dep

17、osit system attacks have been changed so the cross-references in the document are reduced. A new tool list (Annex C) of “Additional tools for deposit tool attack tests (manipulation and fishing devices)” has been added. b) Technical - Implementation of relevant additions and changes in EN 1143-1 sin

18、ce 2001 During the period from December 2001 when the second part of EN 1143 (EN 1143-2) was issued up to now, part 1 of the standard (EN 1143-1) has been reviewed several times and two amendments have been published. Furthermore: CD attacks as in EN 1143-1:1997 have not been implemented as an optio

19、n; GAS explosive attacks as in EN 1143-1:2012 have been implemented as an option (see 9.4 and 10.4). c) Fixing system test Night safes and deposit safes now have the identical test procedure on their fixing system (see Clause 11). The anchoring test now complies with that of ATM safes according to E

20、N 1143-1:2012. It is first attempted to remove or weaken any external fixings, then a force is applied and afterwards a tool attack test on the fixing attachments is performed. d) Updating of references The references in the existing standard were out of date and were therefore updated. e) Reduction

21、 of the scope The scope has been reduced so the standard is valid only for deposit systems with receiving units (when closed) having at least one internal side 1 m (see 4.3). BS EN 1143-2:2014EN 1143-2:2014 (E) 4 f) Distributed systems Requirements of distributed systems were added (see 4.4.3). Exam

22、ples of integrated and distributed deposit systems are given in Annex B. This European Standard is one of a series of product standards for secure storage units of different types. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are

23、bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

24、ugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1143-2:2014EN 1143-2:2014 (E) 5 Introduction This European Standard gives the possibility to classify deposit systems according to their resistance to burglary attacks. The laboratory tests simulate k

25、nown attack methods and such methods and tools which are supposed to be used for attacking these types of products. Human intervention tests are included. The results and repeatability of these depend on the skill of the testing team. Testing laboratories are therefore recommended to participate in

26、inter-laboratory activities to ensure that the standard is used in an overall common approach. Otherwise, results from different laboratories may differ too much. The tests and requirements in this standard are based on the following assumptions (conditions) of use and installation of deposit system

27、s: Deposit safe: For deposit safes, the depositing functions are inside the premises of the company and are only intended to be disposable for the authorized personnel of the company. It is assumed that the authorized personnel carry out the depositions. Deposit safes are installed so the deposit fu

28、nctions are not available for the public. It is also assumed that a burglar does not have the code or key to the deposit functions for some kind of attacks. Night safe: For night safes, the depositing functions are available to customers of financial institutions and, if locked, are disposable only

29、for the authorized personnel of the customer. Night safes are installed so the deposit functions are available also for the public. It is also assumed that a burglar may have the code or key to the depositing functions. Receiving units are basically safes according to EN 1143-1 which have apertures

30、necessary for operation of the deposit system. Examples of different design of deposit systems are given in Annex A. Deposit systems are classified in a system of grades, corresponding to that of EN 1143-1. In addition, there are requirements and test methods for burglary and manipulation of the dep

31、osit system functions. BS EN 1143-2:2014EN 1143-2:2014 (E) 6 1 Scope This European Standard specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits. This European Standard comprises

32、two types of deposit system: Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe. Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to th

33、e content of the deposit safe. The installation condition for deposit safe according to this European Standard is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company. NOTE Parts of a deposit system are a receiving un

34、it, an input unit and in some cases, a chute. This European Standard includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensor

35、s, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this standard. Deposit systems may have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for cla

36、ssification of such functions are not included. This European Standard does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system. 2 Normative references The following documents, in whole or in part, are normatively reference

37、d in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1143-1:2012, Secure storage units - Requirements, classification and method

38、s of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms EN 1300, Secure storage units - Classification for high security locks according to their resistance to unauthorized opening EN ISO/IEC 17025, General requirements for the competence of testing and cali

39、bration laboratories (ISO/IEC 17025) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1143-1 and EN 1300 and the following apply. 3.1 Deposit system definitions 3.1.1 deposit system assembly of a receiving unit and an input unit and optionally a chute

40、for their inter-connection and with all features for depositing and protection Note 1 to entry: Deposit systems can be either deposit safes or night safes. BS EN 1143-2:2014EN 1143-2:2014 (E) 7 Note 2 to entry: A deposit system serves the purpose to securely accept and securely store deposits of cas

41、h and/or valuables. 3.1.2 deposit safe deposit system whose requirements are related to the security provisions needed to enable employees to deposit into the receiving unit without having to unlock the receiving unit door Note 1 to entry: The input unit of this system is intended to be used only by

42、 the employees and not be placed in a public area. 3.1.3 night safe deposit system whose security requirements relate to use by financial institutions for providing a secure receiving service for customer deposits without having to unlock the receiving unit door Note 1 to entry: The input unit of th

43、is system are intended to be used by the customers of financial institutions and can be placed in a public area. 3.1.4 receiving unit secure storage unit with openings necessary to accommodate a deposit system 3.1.5 internal space interior of the receiving unit which is bounded by the inside surface

44、s and the boltwork cover plate(s) of the door of the receiving unit body and excluding parts of the chute or input unit (if any) inside the receiving unit 3.1.6 design capacity usable internal space for storing deposits 3.1.7 input unit user-access facility into which deposits are placed for passing

45、 into the receiving unit Note 1 to entry: Access to input units may be controlled by locks or devices that may provide identification of the depositor. Note 2 to entry: In this context input unit refers to the device intended for deposit items, as opposed to the input unit for locks in EN 1300. 3.1.

46、8 chute optional connection between input unit and receiving unit through which the deposit passes 3.1.9 deposit item placed into the input unit and intended for passing into the receiving unit Note 1 to entry: The deposit may be money or valuables that are deposited in special containers, bags or e

47、nvelopes, or single bank notes or bunches of bank notes. 3.1.10 integrated deposit system deposit system controlled by programmable controllers in which the physical deposit sequences cannot be changed through links to devices outside the receiving unit Note 1 to entry: For an example of integrated

48、deposit system, see Annex B. BS EN 1143-2:2014EN 1143-2:2014 (E) 8 Note 2 to entry: It is permitted that the controller of the integrated deposit system transmits data about the system status and events. 3.1.11 distributed deposit system deposit system controlled by programmable controllers in which

49、 the physical deposit sequences can be changed through links to devices outside the receiving unit Note 1 to entry: For an example of distributed deposit system, see Annex B. 3.1.12 base any part of a deposit system which is between the receiving unit and the surface to which it is to be anchored Note 1 to entry: A base is used to place a deposit system input unit at a convenient height for use. 3.1.13 deposit sequence all steps in the cycle that a deposit system performs from when it has been activated by the depositor and until the system has returned to