BS 5551-2 4-1983 Fertilizers - Sampling - Practical arrangements for final samples《肥料 第2部分 取样 第 4节 最终取样惯例》.pdf

《BS 5551-2 4-1983 Fertilizers - Sampling - Practical arrangements for final samples《肥料 第2部分 取样 第 4节 最终取样惯例》.pdf》由会员分享，可在线阅读，更多相关《BS 5551-2 4-1983 Fertilizers - Sampling - Practical arrangements for final samples《肥料 第2部分 取样 第 4节 最终取样惯例》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 5551-2.4: 1983 ISO 7410:1983 Fertilizers Part 2: Sampling Section 2.4 Practical arrangements for final samples ISO title: Fertilizers and soil conditioners Final samples Practical arrangements UDC 631.8:543.05:620.113BS5551-2.4:1983 This British Standard, having been prepared und

2、er the directionof the ChemicalsStandards Committee,waspublished underthe authorityofthe Boardof BSI and comesintoeffecton 30December1983 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference CIC/37 Draft for comment 81/53153 DC ISBN 0 580 13633 7 Committe

3、es responsible for this British Standard The preparation of this British Standard was entrusted by the Chemicals Standards Committee (CIC/-) to Technical Committee CIC/37 upon which the following bodies were represented: Association of Public Analysts British Agrochemicals Association Department of

4、Industry (Laboratory of the Government Chemist) Fertiliser Manufacturers Association Ltd. Institute of Trading Standards Administration Ministry of Agriculture, Fisheries and Food Amendments issued since publication Amd. No. Date of issue CommentsBS5551-2.4:1983 BSI 10-1999 i Contents Page Committee

5、s responsible Inside front cover National foreword ii 0 Introduction 1 1 Scope and field of application 1 2 Reference 1 3 Handling of samples and division into several final samples 1 4 Containers 1 5 Sealing of containers 1 6 Labelling of final samples 1 7 Disposal of the final sample 1 8 Storage o

6、f final samples 1 Publication referred to Inside back coverBS5551-2.4:1983 ii BSI 10-1999 National foreword This British Standard has been prepared under the direction of the Chemicals Standards Committee in order to standardize terminology and labelling, sampling and methods of physical and chemica

7、l testing for fertilizers. For some years the United Kingdom has participated in the standardization of methods of sampling fertilizers through Subcommittee2, Sampling, of Technical Committee134, Fertilizers and soil conditioners, of the International Organization for Standardization (ISO). As inter

8、national agreement is reached on the methods, it is proposed to publish them as Sections of BS5551. The standard is to be published in four Parts, each Part being subdivided into Sections and, where appropriate, Subsections. The four Parts are: Part 1: Terminology and labelling; Part 2: Sampling; Pa

9、rt 3: Physical properties; Part 4: Chemical analysis. This Section of Part2 is identical with ISO7410:1983 “Fertilizers and soil conditioners Final samples Practical arrangements”. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a

10、British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standar

11、d”. Cross-reference. ISO5306, referred to in clause6, is in course of preparation. When published, it is expected that it will be implemented as an identical Section of BS5551. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are r

12、esponsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard h

13、as been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS5551-2.4:1983 BSI 10-1999 1 0 Introduction In addition to the instructions given in this International Standard, attention should be paid to any le

14、gal requirements in the countries concerned. If the information on the label referred to in clause6 is insufficient, a sampling report, as specified in ISO5306, should accompany the sample. 1 Scope and field of application This International Standard establishes practical arrangements relating to fi

15、nal samples 1)of solid fertilizers and soil conditioners. 2 Reference ISO 5306, Fertilizers Sampling report 2) . 3 Handling of samples and division into several final samples Instructions for the handling of samples, and for their division into several final samples, will form the subject of a futur

16、e International Standard. 4 Containers Appropriate containers, which shall be clean, dry and impervious to moisture, shall be made of glass and/or plastics materials, or any other inert material of adequate resistance, capable of maintaining the sample in its original condition; the containers shall

17、 be fitted with airtight closures. 5 Sealing of containers Each container shall be secured and sealed in such a manner that it can be opened only by breaking the seal; otherwise, the container shall be placed in a sealed, robust package in such a manner that no part of the sample can be removed with

18、out breaking the seal of the package; the label (see clause6) shall be incorporated in the seal. 6 Labelling of final samples Each final sample shall be labelled in an identical manner. The label attached to each final sample shall be adequately secured and sealed to prevent its loss; it shall carry

19、 at least the following information: a) final sample number or other distinguishing mark; b) name of the material and its nominal composition; c) manufacturers reference and batch number (if available); d) date of sampling; e) place of sampling; f) signature and name of the sampler; g) signature and

20、 name of the person or his representative on whose premises the sample was taken. NOTEFurther details of the information required concerning the sample are given in ISO5306. 7 Disposal of the final sample If it is necessary to submit the final sample to any person, the person performing sampling may

21、 either deliver it by hand or send it by any other appropriate method, provided that the containers are suitably protected against accidental damage and all appropriate precautions are taken for the storage of the sample. 8 Storage of final samples All final samples shall be stored under conditions

22、that will not permit deterioration. 1) Or laboratory samples. 2) At present at the stage of draft.2 blankBS5551-2.4:1983 BSI 10-1999 Publication referred to See national foreword.BS 5551-2.4: 1983 ISO 7410:1983 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the indepe

23、ndent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they po

24、ssess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identi

25、ty of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign st

26、andards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on stan

27、dards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Informatio

28、n Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Co

29、pyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitte

30、d in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.