AWS B2 1-4-220-1999 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4 P-4 Group 1 or 2) 1 8 th.pdf

《AWS B2 1-4-220-1999 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4 P-4 Group 1 or 2) 1 8 th.pdf》由会员分享，可在线阅读，更多相关《AWS B2 1-4-220-1999 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4 P-4 Group 1 or 2) 1 8 th.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、AWS B2.1-4-220:1999 (R2009)An American National StandardStandard Welding ProcedureSpecification (SWPS) forGasTungsten ArcWelding (ConsumableInsert Root) of Chromium-Molybdenum Steel(M-4/P-4, Group 1 or 2),E8018-B2, 1/8 through1/2 in.Thick, As-WeldedCondition; 1/8 through3/4 in.Thick, PWHTCondition,

2、IN515 andER80S-B2, PrimarilyPipe ApplicationsSite License550 N.W. LeJeune Road, Miami, FL 33126AWS B2.1-4-220:1999 (R2009)An American National StandardApproved by theAmerican National Standards InstituteDecember 8, 1999Reaffirmed: May 29, 2009Standard Welding Procedure Specification (SWPS) forGas Tu

3、ngsten Arc Welding (Consumable Insert Root)of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2),1/8 through 1/2 in. Thick, As-Welded Condition;1/8 through 3/4 in. Thick, PWHT Condition,IN515 and ER80S-B2, Primarily Pipe Applications1st EditionPrepared by theAmerican Welding Society (AWS) B2 Committe

4、e on Procedure and Performance QualificationUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis standard contains the essential welding variables for chromium-molybdenum steel in the thickness range of 1/8through 1/2 in. in the as-welded cond

5、ition; or 1/8 in. through 3/4 in. in the postweld heat treated (PWHT) condition, usingmanual gas tungsten arc welding with a consumable insert root. It cites the base metals and operating conditions necessaryto make the weldment, the filler metal specifications, and the allowable joint designs for g

6、roove welds. This standardwelding procedure specification (SWPS) was developed primarily for pipe applications.iiAWS B2.1-4-220:1999 (R2009)International Standard Book Number: 0-87171-595-3American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 2000 by American Welding SocietyAll rights reser

7、vedPrinted in the United States of AmericaReaffirmed: May 29, 2009iiiAWS B2.1-4-220:1999 (R2009)Statement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are volunt

8、ary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations

9、of other govern-mental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWSstandards must be approved by the governmental body having statutory jurisdiction before they can become a part ofthose laws and regulations. In all cases, these stan

10、dards carry the full legal authority of the contract or other documentthat invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirementsof an AWS standard must be by agreement between the contracting parties.AWS American National Standards are deve

11、loped through a consensus standards development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While the AWS administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, ev

12、alu-ate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whetherspecial, indirect, consequential, or compensatory, directly or indirectl

13、y resulting from the publication, use of, or relianceon this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any informationpublished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for

14、oron behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of r

15、easonable care in any given circumstances. It isassumed that the use of this standard and its provisions are entrusted to appropriately qualified and competent personnel.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication

16、 of this standard does not authorize infringement of any patent or trade name. Users of this standard acceptany and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this stand

17、ard.Finally, the AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpre

18、tations of any of the technical requirements of this standard may only be obtained by sending a request, inwriting, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 550 N.W. LeJeune Ro

19、ad, Miami, FL 33126 (see Annex A).With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered.These opinions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opinions represent only

20、 the personal opinions of the particular individuals giving them. These individuals donot speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a substitute for an offi

21、cial interpretation.This standard is subject to revision at any time by the AWS B2 Committee on Procedure and Performance Qualification.It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recom-mendations, additions, or deletions) and any pe

22、rtinent data that may be of use in improving this standard are requiredand should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS B2Committee on Procedure and Performance Qualification and the author of the comments will be informed of theCommittees resp

23、onse to the comments. Guests are invited to attend all meetings of the AWS B2 Committee on Procedureand Performance Qualification to express their comments verbally. Procedures for appeal of an adverse decisionconcerning all such comments are provided in the Rules of Operation of the Technical Activ

24、ities Committee. A copy ofthese Rules can be obtained from the American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126.ivAWS B2.1-4-220:1999 (R2009)Personnel (Reaffirmation)AWS B2 Committee on Procedure and Performance QualificationJ. J. Fluckiger, Chair Idaho National LaboratoryJ. L. Coole

25、y, Vice Chair J. C. and Associates, IncorporatedE. W. Beckman, 2nd Vice Chair International Training Institute S. Morales, Secretary American Welding SocietyL. P. Connor ConsultantW. D. Doty Doty and Associates, IncorporatedE. H. Gray U.S. Nuclear Regulatory CommissionB. J. Hable Ford Motor CompanyM

26、. Herrle Arise, IncorporatedR. A. LaFave Elliott Company, IncorporatedK. Y. Lee The Lincoln Electric CompanyK. M. McTague Factory MutualA. S. Olivares HSB Global StandardsJ. F. Pike NASA Langley Research CenterW. M. Ruof Bechtel Plant Machinery, IncorporatedJ. J. Sekely Welding Services, Incorporate

27、dM. R. Stone Canadian Welding BureauG. M. Wisbrock Lockheed Martin Missiles and Fire Control (Retired)R. K. Wiswesser Welder Training and Testing InstituteAdvisors to the AWS B2 Committee on Procedure and Performance QualificationW. L. Ballis ConsultantJ. D. Duncan ConsultantN. K. Kanaya BEAR Testin

28、g LaboratoryB. B. MacDonald ConsultantA. W. Sindel Alstom Power, IncorporatedC. E. Speader, Jr. Aristech Chemical CorporationW. J. Sperko Sperko Engineering ServicesR. F. Waite ConsultantAWS B2D Subcommittee on Standard Welding Procedure SpecificationsJ. J. Sekely, Chair Welding Services, Incorporat

29、edS. Morales, Secretary American Welding SocietyL. P. Connor ConsultantW. D. Doty Doty and Associates, IncorporatedJ. J. Fluckiger Idaho National LaboratoryK. M. McTague Factory MutualW. M. Ruof Bechtel Plant Machinery, IncorporatedAdvisor to the AWS B2D Subcommittee on Standard Welding Procedure Sp

30、ecificationsG. M. Wisbrock Lockheed Martin Missiles and Fire Control (Retired)vAWS B2.1-4-220:1999 (R2009)Personnel (Original)*AdvisorAWS B2 Committee on Procedure and Performance QualificationJ. J. Sekely, Chair Eichleay CorporationG. M. Wisbrock, 1st Vice Chair Lockheed Martin Missiles and Fire Co

31、ntrolJ. J. Fluckiger, 2nd Vice Chair Bechtel Babcock 1/8 through 3/4 in. Thick, PWHT Condition,IN515 and ER80S-B2, Primarily Pipe Applications, but is included for informational purposes only.The American Welding Society and the Welding Research Council have joined in a cooperative effort to generat

32、estandard welding procedures for industry. The need for pretested welding procedures that are supported by adequate testdata and that satisfy the technical requirements for the commonly used construction codes and specifications has beenexpressed by many individuals and organizations. The purpose of

33、 a welding procedure qualification is to provide test datafor assessing the properties of a weld joint.This Welding Procedure Specification is an outgrowth of the coordinated work of the Welding Procedures Committee ofthe Welding Research Council and the AWS B2 Committee on Welding Procedure and Per

34、formance Qualification. TheWelding Procedures Committee has provided the test data documented by a Summary of Procedure Qualification Records.The welding terms used in this specification shall be interpreted in accordance with the definitions given in the latestedition of AWS A3.0, Standard Welding

35、Terms and Definitions, Including Terms for Adhesive Bonding, Brazing, Soldering,Thermal Cutting, and Thermal Spraying.The AWS Committee on Welding Procedure and Performance Qualification was formed in 1979 to provide weldingstandards concerning the subject of qualification. The primary document deve

36、loped by this committee is AWS B2.1,Specification for Welding Procedure and Performance Qualification. This document established the foundation andframework for Standard Welding Procedure Specifications.Comments and suggestions for the improvement of this standard are welcome. They should be sent to

37、 the Secretary,AWS B2 Committee on Welding Procedure and Performance Qualification, American Welding Society, 550 N.W.LeJeune Road, Miami, FL 33126.AWS B2.1-4-220:1999 (R2009)Page 1 of 18Standard Welding Procedure Specification (SWPS)Permission to reproduce for intra-company use only is granted by t

38、he American Welding SocietyGas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick,As-Welded Condition; 1/8 through 3/4 in. Thick, PWHT Condition,IN515 and ER80S-B2, Primarily Pipe ApplicationsWelding Research CouncilSupportin

39、g PQR Numbers: 200714, 200715, 200734, 200735, 200736, 200737, 200757, 200758, 200759, 200760, 200761, 200762, 200809, 200812, 200814, 200817, 200818, 200823, 200824, 200828, 200829, 200844, 200845Requirements forApplication of SWPSsScope. The data to support this Standard WeldingProcedure Specifica

40、tion (SWPS) were derived fromthe above-listed Procedure Qualification Records(PQRs) which were reviewed and validated underthe auspices of the Welding Research Council. ThisSWPS is not valid using conditions and variablesoutside the ranges listed. The American WeldingSociety considers that this SWPS

41、 presents infor-mation for producing an acceptable weld using theconditions and variables listed. The user needs asignificant knowledge of welding and accepts fullresponsibility for the performance of the weld andfor providing the engineering capability, qualifiedpersonnel, and proper equipment to i

42、mplement thisSWPS.Application. This SWPS is to be used only aspermitted by the applicable fabrication document(s);such as code, specification, or contract docu-ment(s). The fabrication document(s) should specifythe engineering requirements such as design, needfor heat treatment, fabricating toleranc

43、es, qualitycontrol, and examination and tests applicable to theend product.Users Responsibility. An SWPS does not replaceor substitute for fabrication codes, specifications,contract requirements, or capability and judgmenton the part of the user. An SWPS is to be used onlyas permitted by the applica

44、ble fabrication code,specification, or contract document.The ability to produce production welds havingproperties suitable for the application depends uponsupplementing the SWPS with appropriate perfor-mance qualification tests and sound engineeringjudgment. The user is responsible for the quality a

45、ndperformance of the final product in accordance withthe provisions of the fabrication document(s).Supplementary Instructions. To adapt this SWPSto a specific application, a user may issue supple-mentary instructions. Such instructions may consistof tighter fit-up tolerances, higher minimum preheatt

46、emperature or any other instructions necessary toproduce a weldment that meets the requirements ofthe fabrication document(s). These instructions shallnot be less restrictive than provided in the SWPS.Safety. Safety precautions shall conform to thelatest edition of ANSI Z49.1, Safety in Welding,Cutt

47、ing, and Allied Processes, published by theAmerican Welding Society.This specification may involve hazardous materials,operations, and equipment. The specification doesnot purport to address all of the safety problemsassociated with its use. It is the responsibility of theuser to establish appropria

48、te safety and health prac-tices. The user should determine the applicability ofany regulatory limitations prior to use.AWS B2.1-4-220:1999 (R2009)Page 2 of 18Standard Welding Procedure Specification (SWPS)Permission to reproduce for intra-company use only is granted by the American Welding SocietyLI

49、MITATIONSThis procedure is not qualified for notch toughness applications.This procedure is not applicable for fillet welds.WELDING PROCESSESWelding Processes: Gas Tungsten Arc Welding (GTAW) (Consumable Insert Root)Method of Application: ManualBASE METALSBase Metal:1Low-alloy steel, M-4 or P-4, Group 1 or 2 to M-4 or P-4, Group 1 or 2Thickness Range: 1/8 through 1/2 in. thick in the as-welded condition, or 1/8 through 3/4 in. thickin the PWHT conditionPipe Diameter: All diametersFILLER METALSFiller Metal Specification:1AWS A5.30 or ASME SFA 5.30 for consumable insertAWS A5.28 or ASME SFA