ANSI UL 2129-2017 UL Standard for Safety Halocarbon Clean Agent Fire Extinguishers (Third Edition).pdf

《ANSI UL 2129-2017 UL Standard for Safety Halocarbon Clean Agent Fire Extinguishers (Third Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI UL 2129-2017 UL Standard for Safety Halocarbon Clean Agent Fire Extinguishers (Third Edition).pdf（53页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 2129 Halocarbon Clean Agent Fire Extinguishers STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MAT

2、ERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Halocarbon Clean Agent Fire Extinguishers, UL 2129 Third Edition, Dated January 5, 2017 Summary of Topics This new edition of ANSI/UL 2129 is being issued to modify requirements for th

3、e Quality Specications. The new requirements are substantially in accordance with Proposal(s) on this subject dated July 29, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photoco

4、pying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, i

5、ncidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no ev

6、ent shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or jud

7、gment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. JANUARY 5, 2017 UL 2129 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISS

8、ION FROM UL JANUARY 5, 2017 UL 2129 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Prepared by: ULC Standards CAN/ULC-S566 Second Edition Underwriters Laboratories Inc. ANSI/UL 2129 Third Edition Halocarbon Clean Age

9、nt Fire Extinguishers January 5, 2017 This harmonized standard has been jointly revised on January 5, 2017 to reect updates to the standard. For this purpose, UL and ULC Standards have updated the Title Page and Preface dated January 5, 2017. ANSI/UL 2129-2017 Approved byUL COPYRIGHTED MATERIAL NOT

10、AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This Standard is issued jointly by Underwriters Laboratories Inc. (UL) and ULC Standards. Amendments to this Standard will be made only after processing according to the Standards writing procedu

11、res by UL and ULC Standards. UL and ULC Standards are separate and independent entities and each is solely responsible for its operations and business activities. The UL trade names and trademarks depicted in this document are the sole property of Underwriters Laboratories Inc. The ULC trade names a

12、nd trademarks depicted in this document are the sole property of ULC Standards. ISSN 0317-526X Copyright 2017 ULC Standards All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. I

13、n Canada, written comments are to be sent to the ULC Standards, 400 - 171 Nepean Street, Ottawa, Ontario KP2 0B4. Proposals should be submitted on a Standards Revision Request Form available from ULC Standards. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by

14、 UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Third edition includin

15、g revisions through January 5, 2017. The most recent designation of ANSI/UL 2129 as an American National Standard (ANSI) occurred on January 5, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals fo

16、r revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPY

17、RIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .6 INTRODUCTION 1 Scope .7 2 Units of Measurement .7 3 Reference Publications 7 4 Components7 5 Glossary .7 CONSTRUCTION 6 General 9 7 Cylinders .10 8 Joints.11 9 Caps, Valves, Closur

18、es, and Pressure Relief 11 10 Gaskets and O Rings 11 11 Filling Density 11 12 Pressure Gauges and Indicators11 13 Puncturing Mechanisms .12 14 Tamper Indicators and Locking Devices .13 15 Hose 13 16 Couplings 14 17 Nozzles and Discharge Valves .14 18 Siphon Tubes 14 19 Handles and Mounting Devices.1

19、4 20 Hose Retainers Wheeled Extinguishers 15 21 Running Gear Wheeled Extinguishers .15 22 Clean Agents.15 23 Expellant Gases 15 24 Gas Cartridges, Expellant Gas Cylinders, and Regulators .15 PERFORMANCE 25 General16 26 Fire Tests16 27 Tamper Indicator and Locking Device Tests16 28 Handle and Mountin

20、g Device Test 17 29 Operation Test .17 30 Discharge Duration Test .18 31 Rate of Flow Test.18 32 Intermittent Discharge Test 18 33 Operating Temperature Limits Test .18 34 Temperature Cycling Test .18 35 30-Day Elevated Temperature Test .19 36 High Temperature Exposure Test 19 37 Abnormal Operation

21、Test 19 38 Pressure-Retention Test .19 39 Hydrostatic Pressure Test .19 39.1 Cylinders 19 JANUARY 5, 2017 CAN/ULC-S566 ANSI/UL 2129 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 39.2 Discharge valves, caps, and closures .21 39.3 Hose asse

22、mblies .21 39.4 Gas cartridges .21 39.5 Test method .22 40 Vibration Test 22 40.1 General .22 40.2 Mounting of test sample.23 40.3 Test orientation 23 40.4 Variable frequency test .23 40.5 Endurance test.23 41 Roadability and Rough Usage Tests 23 41.1 Roadability 23 41.2 Rough usage 24 41.3 Rough us

23、age operation .25 42 Siphon Pull Test 25 43 Aging Tests Polymeric Materials 26 43.1 General .26 43.2 Exposure to extinguishing agent test .27 43.3 Light and water test 27 44 Elastomeric Parts Test 28 45 Salt Spray Corrosion Test .28 46 10-Day Moist Ammonia Air Stress Cracking Test .29 47 Servicing T

24、ests .29 48 One-Year Time Leakage Test 30 49 Calibration Test Gauges and Indicators 30 50 Burst Strength Test Gauges and Indicators 30 51 Water Resistance Test Gauges and Indicators .31 52 Leakage Test Gauges and Indicators31 53 Cycling Test Pressure Indicators 31 54 Vibration Test Pressure Gauges a

25、nd Indicators .31 55 Overpressure Test Gauges.32 56 Impulse Test Gauges32 57 Pressure Gauge Relief Test32 58 Nameplate Exposure Tests 32 59 Nameplate Adhesion Test .33 60 Nameplate Abrasion Test 33 PACKAGING 61 General34 MANUFACTURING AND PRODUCTION TESTS 62 General34 63 Hydrostatic Pressure Test .3

26、4 63.1 Cylinders 34 63.2 Non-DOT or Non-TDGR gas cartridges .35 63.3 Hoses and couplings .35 64 One-Year Leakage Test .35 MARKING 65 General36 JANUARY 5, 2017 CAN/ULC-S566 ANSI/UL 2129 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 66 Oper

27、ating Instructions .38 67 Use Code Symbols .39 68 Recharging Instructions39 69 Identication of Contents 39 70 Inspection Instructions.40 RECORD TAGS AND MANUALS 71 Record Tag 41 72 Manuals .41 TABLES FIGURES ANNEX A (NORMATIVE) ANNEX B (NORMATIVE) JANUARY 5, 2017 CAN/ULC-S566 ANSI/UL 2129 5UL COPYRI

28、GHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common UL and ULC Standard for Halocarbon Clean Agent Fire Extinguishers. It is the Second edition of CAN/ULC-S566, and the Third edition of ANSI/UL 2129. This common Standard was pr

29、epared by Underwriters Laboratories Inc., ULC Standards, and the UL/ ULC Extinguisher Technical Harmonization Committee. The efforts and support of the Harmonization Technical Committee are gratefully acknowledged. Only metric SI units of measurement are used in this Standard. If a value for measure

30、ment is followed by a value in other units in parentheses, the second value may be approximate. The rst stated value is the requirement. In Canada, there are two official languages, English and French. All safety warnings must be in French and English. Attention is drawn to the possibility that some

31、 Canadian authorities may require additional markings and/or installation instructions to be in both official languages. Note: Although the intended primary application of this Standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to

32、 judge its suitability for their particular purpose. Level of harmonization This Standard is published as an identical standard between UL and ULC Standards. An identical standard is a standard that is the same in technical content except for conicts in Codes and Governmental Regulations. Presentati

33、on shall be word for word except for editorial changes. Interpretations The interpretation by the SDO of an identical or equivalent standard shall be based on the literal text to determine compliance with the standard in accordance with the procedural rules of the SDO. If more than one interpretatio

34、n of the literal text has been identied, a revision shall be proposed as soon as possible to each of the SDOs to more accurately reect the intent. UL Effective Date A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved Standard. JANUARY 5, 2017

35、 CAN/ULC-S566 ANSI/UL 2129 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover the construction and performance, exclusive of performance during re tests, of portable halocarbon clean agent re e

36、xtinguishers. Halocarbon clean agent re extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. 1.2 The requirements for performance during re testing of halocarbon clean agent re extinguishers are

37、specied in the Binational Standard for Rating and Fire Testing of Fire Extinguishers, ANSI/UL 711/CAN/ULC-S508. 1.3 As used in these requirements, the term re extinguisher refers to all extinguishers or any part thereof covered by these requirements, unless specically noted otherwise. 2 Units of Mea

38、surement 2.1 The metric unit shall be designated as the official unit for purposes of this standard. Where values of measurement are specied in both SI and English units, either unit is used. In cases of dispute, the metric unit shall be used. 3 Reference Publications 3.1 See Annex A for a list of p

39、ublications referenced in this standard. Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. When the latest edition of a standard is not applicable, the appropriate edition is in

40、dicated accordingly in Annex A. 4 Components 4.1 Except as indicated in 4.2, a component of a product covered by this standard shall comply with the requirements for that component. A component shall comply with both the Underwriters Laboratories Inc. and the Underwriters Laboratories of Canada stan

41、dards for the component. 4.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 4.3 A component

42、shall be used in accordance with its rating established for the intended conditions of use. 4.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not ex

43、ceeding specied limits, and shall be used only under those specic conditions. 5 Glossary 5.1 For the purpose of this Standard, the following denitions apply: JANUARY 5, 2017 CAN/ULC-S566 ANSI/UL 2129 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION

44、FROM UL 5.2 CLEAN AGENT Electrically nonconducting, volatile, or gaseous re extinguishant that does not leave a residue. 5.3 DISPOSABLE (NONRECHARGEABLE) FIRE EXTINGUISHER A re extinguisher not capable of nor intended to undergo complete maintenance including internal inspection of cylinder, replace

45、ment of parts and seals and hydrostatic testing. 5.4 EFFECTIVE DISCHARGE The time of discharge of extinguishing agent from the extinguisher until gas point. 5.5 EXPELLANT GAS A compressed or pressurized gas used to propel the clean agent from a single cylinder. 5.6 GALVANIC COMPATIBILITY Fire exting

46、uisher cylinder and component parts which are not susceptible to 10-day stress corrosion cracking nor corrosion from combination of dissimilar materials. 5.7 GAS POINT The point in time when the discharge changes from extinguishing agent to a gas and agent combination. 5.8 HALOCARBON AGENT A clean a

47、gent that contains as primary components one or more of the elements uorine, chlorine, bromine or iodine. Examples include hydrochlorouorocarbons (HCFCs), hydrouorocarbons (HFCs), peruorocarbons (PFCs), and uoriodocarbons (FICs) type agents. The words clean agent as used in this document shall mean

48、halocarbon agent unless otherwise indicated. 5.9 LOWEST OBSERVABLE ADVERSE EFFECT LEVEL (LOAEL) The lowest concentration at which an adverse physiological or toxicological effect has been observed. 5.10 PORTABLE FIRE EXTINGUISHER A re extinguisher carried or on wheels and operated by hand. 5.11 PRES

49、SURE GAUGE A gauge that shows the pressure in the cylinder and the operating range of the extinguisher based upon the operating temperature-pressure relationship in appropriate pressure units. 5.12 PRESSURE INDICATOR An indicator that shows that the extinguisher is pressurized with its rated expellant gas pressure. 5.13 RECHARGEABLE (REFILLABLE) FIRE EXTINGUISHER A re extinguisher capable of undergoing complete m