ANSI C37.16-2000 Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings Related Requirements and Application Recommendations for《低压电力断路器和交流电力电路保护器的优选额.pdf

《ANSI C37.16-2000 Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings Related Requirements and Application Recommendations for《低压电力断路器和交流电力电路保护器的优选额.pdf》由会员分享，可在线阅读，更多相关《ANSI C37.16-2000 Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings Related Requirements and Application Recommendations for《低压电力断路器和交流电力电路保护器的优选额.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2003 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Printed in the United States of America.Print:ISBN 0-7381-3598-4 SH95095PDF:ISBN 0-7381-3599-2 SS95

2、095No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.ANSI C37.16-2000American National Standard Low-Voltage PowerCircuit Breakers and AC PowerCircuit ProtectorsPreferred Ratings, Related Re

3、quirements, and ApplicationRecommendationsApproved 05/19/00American National Standards Institute, Inc.Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyri

4、ght The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI C37.16 - 2000 Page i Approval of an American National Standard requires verification by ANSI that the require

5、ments for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreemen

6、t means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respec

7、t preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Insti tute does not develop standards and will in no circumstances give an interpre

8、tation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the Amer ican National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose

9、name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any ti me. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers

10、of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 N. 17th Street, Rosslyn, Virginia 22209 Copyright 2000 by the National Electrical Manufactu

11、rers Association. All rights includi ng translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention or the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this publication may b e reprod

12、uced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America American National Standard Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for

13、 ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI C37.16 - 2000 Page iii FORE

14、WORD (This foreword is not part of American National Standard C37.16 - 2000.) This standard has been revised to include a 5000 Ampere frame size in tables 1 through 5 and tables 22A and 22B for low - voltage AC power circuit breakers. In addition, both 1000 volt and 1200 volt ratings for DC breakers

15、 in tables 11, 11a, and 12 are now incl uded, since both ratings of breakers are now available. The titles of tables 11 and 12 have been clarified to differentiate between “heavy duty” and “light duty” applications. The 1997 version was revised to reflect industry trends such as deleting the 22 5 am

16、pere frame size throughout since it is not utilized any longer; adding a 2000 ampere frame size fused circuit breaker (Tables 17 and 19, Line 4) which is now available; incorporating the C37.16a - 1994 DC circuit breaker Tables 8, 9, 10, 11, 11A and 12, which correlated with C37.14 - 1992; and incor

17、porating the electronic trip device ratings. This standard was first published by the American Standards Association (now the American National Standards Institute) in 1956, using material developed by the Natio nal Electrical Manufacturers Association (NEMA). Reference should be made to the appropr

18、iate American National Standards for service conditions, definitions, ratings, temperature limitations, classes of insulating material, nameplate markings, dielectric -withstand requirements, test requirements, and application standards. American National Standards are subject to periodic review. Us

19、ers are cautioned to secure the latest edition. Suggestions for improvement of this standard will be welcome. They should be sent to the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209. This standard was processed and approved for submittal to ANS

20、I by the Accredited Standards Committee on Power Switchgear, C37. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time this standard was approved, the C37 Committee had the following members: E. Byron, Chairman A.K. McCabe, Exec

21、utive Vice - Chairman, HV Standa rds J. Scott, Executive Vice - Chairman, LV Standards D.L. Swindler, Executive Vice - Chairman, IEC Activities M. Calwise, Secretary Organizations Represented Name of Representative Electric Light and Power Group . D.E. Galicia J.L. Koepfinger G.J. Martuscello Y. Mus

22、a E. Worland Institute of Electrical and Electronics Engineers T. Burse K. Gray A. Monroe B. Puckett T.E. Royster R. Garzon (Alt) J.G. Wo od (Alt) Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking

23、permitted without license from IHS-,-,-ANSI C37.16 - 2000 Page iv National Electrical Manufacturers Association . G. Jones W. Long T. Olsen G. Sakats D. Stone E. Byron (Alt) International Electrical Testing Association . A. Peterson National Electrical Contractors Association . D. Harwood Testing La

24、boratory Group P. Notarian E. Roseen Tennessee Valley Authority . J. Nelson U.S. Dept. of Agriculture H.L. Bowles U.S. Dept. Of the Army - Office of the Chief of Engineers . J.A. Gilson U.S. Dept. of the Navy - Naval Constru ction Battalion Center . D.L. Mills Technical Liaison . W. Laubach C. Wagne

25、r The following members of NEMA Power Circuit Breaker Technical Committee and NEMA Power Switchgear Assemblies Technical Committee worked on this Guide prior to its publicati on: C. Ball G. Montillet D. Stone M. Beard G. Nourse F. Teufel E. Byron T. Olsen T. Tobin P. Dwyer G. Sakats J. Wiseman R. Ga

26、rzon S. Slattery R. York R.W. Long H.M. Smith Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI C37.16 - 2000 Page v CONTENTS Clause Page Foreword iii 1

27、Scope . 1 2 Referenced standards 1 3 Requirements . 1 4 Revision of American National Standards referred to in this document . 1 TABLES Table 1 Preferred ratings for low - voltage AC power circuit breakers with instantaneous direct - acting phase trip elements 2 Table 2 Preferred ratings for low - v

28、oltage AC power circuit breakers without instantaneous direct - acting phase trip elements 3 Table 3 Overload switching requirements for low - voltage AC power circuit breakers 4 Table 4 Endurance requirements for low - voltage AC power circuit breakers . 4 Table 5 Application limitations relating t

29、o repetitive duty and normal maintenance of low - voltage AC power circuit breakers 4 Table 6 Application of low - voltage AC power circuit breakers to full - voltage moto r starting and running duty of three - phase, 60 - Hz, 40C - rise motors . 5 Table 7 Preferred ratings and related requirements

30、of field - discharge circuit breakers 6 Table 8 Preferred ratings for general - purpose DC power circuit breakers with or without inst antaneous direct - acting trip elements . 7 Table 9 Test circuit values for general - purpose low - voltage DC power circuit breakers . 8 Table 10 Preferred ratings

31、and test - circuit values for general - purpose low - voltage DC power circuit breakers for mining appl ications . 9 Table 11 Preferred ratings and test circuit values for “heavy duty” high - speed, semi - high - speed, and rectifier low - voltage DC power circuit breakers 10 Table 11A Preferred rat

32、ings and test circuit values for “heavy duty” high - speed, semi - hi gh - speed, and rectifier low - voltage DC power circuit breakers 11 Table 12 Preferred ratings and test circuit values for “light duty” high - speed, semi - high - speed, and rectifier low - voltage DC power circuit breakers 12 T

33、able 13 (Deleted from this editi on) Table 14 Endurance requirements for low - voltage DC power circuit breakers and field discharge circuit breakers 13 Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or netwo

34、rking permitted without license from IHS-,-,-ANSI C37.16 - 2000 Page vi Table 15 Application limitations relating to repetitive duty and normal maintenance of low - voltage DC power circuit breakers . 13 Tab le 16 Application of general - purpose low - voltage DC power circuit breakers to motor star

35、ting and running duty 14 Table 17 Preferred ratings for integrally fused low - voltage AC power circuit breakers with instantaneous direct - acting phase trip element s . 15 Table 18 Application of integrally fused low - voltage AC power circuit breakers to full - voltage motor starting and running

36、duty of three - phase, 60 - Hz, 40C - rise motors maximum short - circuit current rating: 200 000 rms symmetrical current 16 Tab le 19 Application limitations relating to repetitive duty and normal maintenance of integrally fused low - voltage AC power circuit breakers 17 Table 20 Preferred ratings

37、for low - voltage AC power circuit protectors 17 Table 21 Endurance requirements for low - voltage AC power circuit protectors . 18 Table 22A Preferred trip - device current ratings or settings (in amperes) of low - voltage power circuit breakers (electro - mechanical) . 18 Table 22B Preferred trip

38、- device current ratings or settings (in amperes) o f low - voltage power circuit breakers (electronic) 18 Table 23 Preferred rated control voltages and their ranges 19 Annex 21 Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for Resal

39、eNo reproduction or networking permitted without license from IHS-,-,-AMERICAN NATIONAL STANDARD C37.16 - 2000 Low - Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings, Related Requirements, and Applica tion Recommendations 1 Scope This standard applies to all low - vol

40、tage power circuit breakers and AC power circuit protectors as covered in the following American National Standards (see Section 4): ANSI/IEEE C37.13 - 1990 (R1995), American National Stand ard for Low - Voltage AC Power Circuit Breakers Used in Enclosures ANSI/IEEE C37.14 - 1999, American National

41、Standard for Low - Voltage DC Power Circuit Breakers Used in Enclosures. ANSI C37.17 - 1997, American National Standard for Trip Devices for AC and Gene ral Purpose DC Low -Voltage Power Circuit Breakers ANSI/IEEE C37.18 - 1979 (R1997), American National Standard Requirements for Field Discharge Cir

42、cuit Breakers for Rotating Electric Machinery ANSI/IEEE C37.29 - 1981 (R1990), American National Standard for Lo w - Voltage AC Power Circuit Protectors Used in Enclosures ANSI C37.50 - 1989 (R2000), American National Standard Test Procedures for Low - Voltage AC Power Circuit Breakers Used in Enclo

43、sures ANSI C37.52 - 1974 (R2000), American National Standard Test Proced ures for Low - Voltage AC Power Circuit Protectors Used in Enclosures 2 Referenced standards In addition to the standards listed in Section 1, this standard is intended for use in conjunction with American National Standard Nat

44、ional Electrical Code, ANSI/N FPA 70 - 1999. 3 Requirements Preferred ratings, related requirements, and application recommendations for low - voltage power circuit breakers and AC power circuit protectors shall be as given in tables 1 through 23. 4 Revision of American National Standar ds referred

45、to in this document When the American National Standards referred to in this document are superseded by a revision approved by the American National Standards Institute, Inc., the revision shall apply. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under licens

46、e with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI C37.16 - 2000 Page 2 2Table 1 Preferred Ratings for l ow - voltage AC power circuit breakers with instantaneous direct - acting phase trip elements (See ANSI/IEEE C37.13) Rated maximum - Dielectric Sho

47、rt - circuit current rating, Range of trip - device current ratings amperes 2 voltage volts withstand volts symm etrical amperes 1 Frame - size amperes Electro -mechanical Electronic Line No. Col 1 Col 2 Col 3 Col 4 Col 5 Col 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 635 635 6

48、35 635 635 635 635 635 508 508 508 508 508 508 508 508 254 254 254 254 254 254 254 254 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 22000 22000 42000 42000 65000 65000 85000 85000 30000 30000 50000 50000 65000 65000 85000 850

49、00 42000 42000 650 00 65000 85000 85000 130000 130000 600 800 1600 2000 3000 3200 4000 5000 600 800 1600 2000 3000 3200 4000 5000 600 800 1600 2000 3000 3200 4000 5000 40 - 600 100 - 800 200 - 1600 200 - 2000 2000 - 3000 2000 - 3200 4000 5000 100 - 600 100 - 800 400 - 1600 400 - 2000 2000 - 30 00 2000 - 3200 4000 5000 150 - 600 150 - 800 600 - 1600 600 - 20